Chauvet DJ Cosmos HP Bedienungsanleitung

Cosmos HP

User Manual

Table of Contents

Cosmos HP User Manual Rev. 1

TABLE OF CONTENTS

1. Before You Begin ......................................................................................... 1

What Is Included ...................................................................................................... 1

Unpacking Instructions............................................................................................. 1

Claims ............................................................................................................................ 1

Text Conventions ..................................................................................................... 1

Symbols ................................................................................................................... 1

Safety Notes............................................................................................................. 2

Disclaimer ................................................................................................................ 2

2. Introduction................................................................................................... 3

Product Overview..................................................................................................... 3

Product Dimensions ................................................................................................. 4

3. Setup.............................................................................................................. 5

AC Power ................................................................................................................. 5

Fuse Replacement.......................................................................................................... 5

Power Linking................................................................................................................. 5

Mounting .................................................................................................................. 6

Orientation...................................................................................................................... 6

Rigging ........................................................................................................................... 6

4. Operation....................................................................................................... 7

Control Panel Operation........................................................................................... 7

Menu Map ................................................................................................................ 7

Configuration (DMX) ...................................................................................................... 7

DMX Personality and Starting Address.......................................................................... 7

DMX Channel Assignments and Values .................................................................. 8

Configuration (Standalone) ...................................................................................... 10

Automatic Program ........................................................................................................ 10

Auto Program Speed...................................................................................................... 10

Motor Rotation Speed .................................................................................................... 10

Static Color Mode........................................................................................................... 10

Sound-Active Programs ................................................................................................. 10

Sound Sensitivity............................................................................................................ 10

Factory Reset................................................................................................................. 10

IRC-6 Infrared Remote Control ................................................................................ 11

Master/Slave Mode .................................................................................................. 12

5. Maintenance.................................................................................................. 13

Product Maintenance ............................................................................................... 13

6. Technical Specifications.............................................................................. 14

Warranty & Returns.................................................................................................. 15

Cosmos HP User Manual Rev. 1

Before You Begin

1. Before You Begin

What Is Included

Unpacking Instructions

Carefully unpack the product immediately and check the container to make sure all the parts are in the

package and are in good condition.

Claims

If the box or the contents (the product and included accessories) appear damaged from shipping, or show

signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier

immediately may invalidate your claim. In addition, keep the box and contents for inspection.

For other issues, such as missing components or parts, damage not related to shipping, or concealed

damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Symbols

•CosmosHP

• Power cable

• Hanging bracket

• Quick Reference Guide

Convention Meaning

1–512 A range of values

50/60 A set of values of which only one can be chosen

Settings A menu option not to be modified

<ENTER> A key to be pressed on the product’s control panel

ON A value to be entered or selected

Symbol Meaning

Critical installation, configuration, or operation information. Not following these

instructions may make the product not work, cause damage to the product, or cause

harm to the operator.

Important installation or configuration information. The product may not function

correctly if this information is not used.

Useful information.

Before You Begin

Cosmos HP User Manual Rev. 1

Safety Notes

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However,

Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,

damage or disruption caused by any errors or omissions in this document, whether such errors or

omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the

content of this document without any obligation to notify any person or company of such revision, however,

Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest

version from www.chauvetdj.com.

The works of authorship contained in this manual, including, but not limited to, all design, text and images

are owned by Chauvet.

Electronically published by Chauvet in the United States of America.

CHAUVET, the Chauvet logo, and Cosmos HP are registered trademarks or trademarks of Chauvet & Sons

LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and

product names and logos referred to herein may be trademarks of their respective companies.

■ALWAYS:

♦Connect to a grounded circuit.

♦Connect to operating voltages as specified on the product's spec sticker.

♦Disconnect from power before replacing the fuse.

♦Disconnect from its power source during periods of inactivity.

♦Use a safety cable when suspending overhead.

♦Heed all restrictions and warnings on the spec sticker.

♦Mount in a location with at least 20 in (50 cm) of ventilation.

♦Replace the fuse with the same type and rating.

♦Use a clamp with a captive bolt when a single hanging bracket is used.

■In the event of a serious operating problem, stop using immediately.

■DO NOT:

♦Open this product or attempt any repairs. It contains no user-serviceable parts.

♦Look at the light source when the product is on.

♦Use if the power cord is crimped or damaged.

♦Disconnect by pulling on the power cord.

♦Allow flammable materials close to the product when it is operating.

♦Touch the housing when it is on.

♦Block any ventilation holes/slots in the housing.

♦Connect to a dimmer or rheostat.

♦Carry the product by its power cord.

♦Operate in temperatures higher than 104°F (40°C).

♦Expose to environments that exceed the Ingress Protection (IP) rating.

♦Expose to rain or moisture.

♦Use outdoors.

♦Expose to corrosive environmental conditions such as temperature, humidity, salinity, pressure, radiation,

or shock.

♦Set this product on a flammable surface.

Keep this User Manual for future use. If the product is sold to someone else, be sure that they

also receive this document.

Cosmos HP User Manual Rev. 1

Introduction

2. Introduction

Product Overview

Display

Power

out

DMX in/

out

Microphone

LED

Indicators

buttons

Carry

handle

Power

Fuse holder

IR sensor

Introduction

Cosmos HP User Manual Rev. 1

Product Dimensions

11.6 in

295 mm

18.9 in

480 mm

3.5 in

90 mm

Cosmos HP User Manual Rev. 1

Setup

3. Setup

AC Power

The Cosmos HP has an auto-ranging power supply, and it can work with an input voltage range of 100 to

240 VAC, 50/60 Hz.

To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current

value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.

The listed current rating indicates the product’s average current draw under normal conditions.

Fuse Replacement

1. Disconnect the product from power.

2. Using a Phillips-head screwdriver, unscrew the fuse holder and pull it straight out.

3. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.

4. Re-insert the fuse holder and reconnect power.

Power Linking

The product provides power linking via the outlet located in the back of the product. See the diagram below

for further explanation.

Power Linking Diagram

• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure

the product has an appropriate electrical ground to avoid the risk of electrocution or fire.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the

rheostat or dimmer channel serves only as a 0 to 100% switch.

It is possible to link up to 50 Cosmos HP products on 120 VAC or up to 95 products on 230

VAC.

The power linking diagram shown above corresponds to the North American version of

the product ONLY! If using the product in other markets, you must consult with the local

Chauvet distributor as power linking connectors and requirements may differ in your

country or region.

Power

source

1st product 2nd product 3rd product

Additional

products

Setup

Cosmos HP User Manual Rev. 1

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.

Orientation

The Cosmos HP may be mounted in any position; however, make sure adequate ventilation is provided

around the product.

Rigging

• Before deciding on a location, always make sure there is easy access to the product for

maintenance and programming.

• Make sure adequate ventilation is provided around the product.

• Mount the product on a structure or surface that can support the product’s weight (see the Technical

Specifications).

• Always use a safety cable when mounting the product overhead. Mount the product securely to a

rigging point, such as an elevated platform or a truss.

• Use a mounting clamp of appropriate weight capacity when rigging the product onto a truss

• When power linking multiple products, mount the products close enough for power-linking cables to

reach.

Mounting Diagram

Safety cable

(such as CH-05

from Chauvet)

Mounting clamp

(such as CLP-15N from Chauvet)

Mounting

bracket

Cosmos HP User Manual Rev. 1

Operation

4. Operation

Control Panel Operation

To access the control panel functions, use the four buttons located underneath the display. Refer to the

Product Overview to see the button locations on the control panel.

Menu Map

Refer to the Cosmos HP product page on

www.chauvetdj.com

for the latest menu map.

Configuration (DMX)

Set the product in DMX mode to control with a DMX controller.

1. Connect the product to a suitable power outlet.

2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the

product.

DMX Personality and Starting Address

When selecting a starting DMX address, always consider the number of DMX channels the selected DMX

mode uses. If the starting address is set too high, access to some of the product’s channels could be

restricted.

The Cosmos HP uses up to 23 DMX channels in a 23Ch DMX mode, which defines the highest

recommended address to 490.

For information about the DMX protocol, download the DMX Primer from www.chauvetdj.com.

To select the starting address, do the following:

1. Press <MENU> repeatedly until 6Ch or 23Ch shows on the display.

2. Press <ENTER> and A001–512 will show on the display.

3. Use <UP> or <DOWN> to select the starting address.

4. Press <ENTER>.

Button Function

<MENU> Exits from the current menu or function

<UP> Navigates upwards through the menu list or increases a selected numeric value

<DOWN> Navigates downwards through the menu list or decreases a selected numeric value

<ENTER> Enables the currently displayed menu or sets a selected value into the selected function

Mode Programming Levels Description

DMX Mode 6Ch A001–512 6-channel DMX mode

23Ch 23-channel DMX mode

Programs P-- P 1–6 Automatic programs

Auto Speed S-- S001–100 Program speed for P 1–6

Motor Mot M000–100 Standalone motor speed

Static Colors

C-- C001–015 Static colors

Sound Mode Snd

bo Sound-active program, blackout without sound

SLoU Sound-active program, slow down without

sound

Sensitivity SEnS u001–100 Sets sound sensitivity

Infrared

Mode SEt on Turns infrared on or off

oFF

Operation

Cosmos HP User Manual Rev. 1

DMX Channel Assignments and Values

6Ch 23Ch Function Value Percent/Setting

1 1 Auto programs

000 005 No function

006 250 Auto program

251 255 Sound-active program

Program speed

(when Ch1 is 006 250)001 255 Automatic program speed, slow to fast

Sound Sensitivity

(when Ch1 is 251 255)001 255 Sound sensitivity, low to high

– 3 Head 1, red 1 000 255 0–100%

– 4 Head 1 green 1 000 255 0–100%

– 5 Head 1 Blue 1 000 255 0–100%

– 6 Head 1 White 1 000 005 0–100%

– 7 Head 1 Red 2 000 255 0–100%

– 8 Head 1 Green 2 000 255 0–100%

– 9 Head 1 Blue 2 000 255 0–100%

– 10 Head 1 White 2 000 255 0–100%

– 11 Head 2 Red 1 000 255 0–100%

– 12 Head 2 Green 1 000 255 0–100%

– 13 Head 2 Blue 1 000 255 0–100%

– 14 Head 2 White 1 000 255 0–100%

– 15 Head 2 Red 2 000 255 0–100%

– 16 Head 2 Green 2 000 255 0–100%

– 17 Head 2 Blue 2 000 255 0–100%

– 18 Head 2 White 2 000 255 0–100%

3–Colormacros

000 015 No function

016 031 Red

032 047 Green

048 063 Blue

080 095 Green and yellow

096 111 Red and blue

112 127 Red and white

128 143 Green and blue

144 159 Green and white

160 175 Blue and white

176 191 Red, green, and blue

192 207 Red, green, and white

208 223 Red, blue, and white

224 239 Green, blue, and white

240 255 Red, green, blue and white

419Strobe 000 005 No function

006 255 Strobe, slow to fast

5 20 Dimmer 000 255 0–100%

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Chauvet DJ DJ-Equipment Handbücher

Chauvet DJ

Chauvet DJ LED SHADOW 2 ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ SM-250 Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4BAR USB Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZ Link Par Q6 BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZLink Par Q1BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ Maverick MK2 Wash Bedienungsanleitung

Chauvet DJ

Chauvet DJ IMIDATOR SPOT 160 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Intimidator SPOT 155 Bedienungsanleitung

Chauvet DJ

Chauvet DJ COLORband HEX 9 IRC Bedienungsanleitung

Chauvet DJ

Chauvet DJ Pinspot Bar Bedienungsanleitung

Chauvet DJ

Chauvet DJ Freedom Flex H4 IP Bedienungsanleitung

Chauvet DJ

Chauvet DJ Rotosphere HP Bedienungsanleitung

Chauvet DJ

Chauvet DJ SHOCKER PANEL 180 Bedienungsanleitung

Chauvet DJ

Chauvet DJ COLORstrip Mini Bedienungsanleitung

Chauvet DJ

Chauvet DJ HURRICANE HAZE 4D Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR Q12BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ GigBAR IRC Bedienungsanleitung

Chauvet DJ

Chauvet DJ Hurricane 1000 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Freedom Wedge Quad Bedienungsanleitung

Chauvet DJ

Chauvet DJ Ovation E-910FC IP Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR PRO W USB Bedienungsanleitung

Chauvet DJ

Chauvet DJ COLORbar SMD Bedienungsanleitung

Chauvet DJ

Chauvet DJ Green Thinking LFS-5D Bedienungsanleitung

Chauvet DJ

Chauvet DJ EVE P-160 RGBW Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung