Chauvet Professional COLORSTRIKEM Bedienungsanleitung

Quick Reference Guide

English EN

Español ES

Français FR

Deutsch DE

Nederlands NL

Model ID: COLORSTRIKEM

QUICK REFERENCE GUIDE

Color STRIKE M QRG Rev. 7

About This Guide

The Color STRIKE M Quick Reference Guide (QRG) has basic product information such as connection, mounting, menu

options, and DMX values. Download the User Manual from www.chauvetprofessional.com for more details.

Disclaimer

The information and specifications contained in this QRG are subject to change without notice.

LIMITED WARRANTY

FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.

For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.

For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and

Germany: www.chauvetlighting.eu/warranty-registration.

Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the

period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This

warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this

warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows

the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This

warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to

country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,

Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.

Safety Notes

These Safety Notes include important information about installation, use, and maintenance.

• DO NOT open this product. It contains no user-serviceable parts.

• DO NOT look at the light source when the product is on.

• DO NOT leave any flammable material within 20 cm of this product while operating or connected to power.

• DO NOT operate this product if the housing, lenses, or cables appear damaged.

• DO NOT connect this product to a dimmer or rheostat.

• DO NOT submerge this product. Temporary outdoor operation is fine (IP65).

• Not for permanent outdoor installation in locations with extreme environmental conditions. This includes, but is not

limited to:

• Exposure to a marine/saline environment (within 3 miles of a saltwater body).

• Where the normal high or low temperatures of the location exceed the temperature ranges in this manual.

• Locations that are prone to flooding or being buried in snow.

• Other areas where the product will be subject to extreme radiation or caustic substances.

• CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm humid

ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow

product to fully acclimate to the surrounding environment before connecting it to power.

• CAUTION: This product's housing may be hot when lights are operating.

• USE a safety cable when mounting this product overhead.

• ONLY connect this product to a grounded and protected circuit.

• ONLY use the hanging/mounting bracket to carry this product.

• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

• The product is not intended for permanent installation.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the

product from power via breaker or by unplugging it.

• In the event of a serious operating problem, stop using immediately.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.

• The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 10 ft

(3 m) is not expected.

• Minimum distance from irradiated object to the final lens of the luminaire: 1.7 ft (.5 m)

• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord

exclusively available from the manufacturer or his service agent.

• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a

similar qualified person.

• The luminaire is intended for professional use only.

FCC Compliance

This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

Color STRIKE M QRG Rev. 7

QUICK REFERENCE GUIDE

RF Exposure Warning for North America and Australia

Warning! This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This

transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Contact

Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or

return a product. Refer to Contact Us at the end of this QRG for contact information.

What is Included

AC Power

This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.

AC Plug

DMX Linking

The Color STRIKE M will work with a DMX controller using a 5-pin DMX serial connection. A DMX Primer is available

from www.chauvetprofessional.com.

DMX Connection

The Color STRIKE M uses a 5-pin DMX data connection for its 6 control personalities:

8CH

11CH

13CH

24CH

30CH,

74CH

, and

97CH

. See the User Manual for information about connecting and configuring the product for DMX operation.

Master/Slave Connection

The Color STRIKE M uses the DMX data connection for its master/slave mode. See the User Manual for information

about how to connect and configure the product for master/slave operation.

Signal Connection

The Color STRIKE M can link to controller software using an Ethernet connection. If using other Art-Net™- or sACN-

compatible products with the Color STRIKE M, each product can be controlled individually on a single network. See the

User Manual for information about how to connect and configure the product for these signals.

Art-Net™Connection

Art-Net™ is an Ethernet protocol that uses TCP/IP, which transfers a large amount of DMX512 data using an Amphenol

XLR Net RJ45 connection over a large network. An Art-Net™ protocol document is available from

www.chauvetprofessional.com. Chauvet Professional recommends using unicast Art-Net™ for best results.

Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.

sACN Connection

Also known as ANSI E1.31, Streaming-ACN is an Ethernet protocol that uses the layering and formatting of Architecture

for Control Networks to transport DMX512 data over IP or any other ACN-compatible network.

RDM (Remote Device Management)

Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally

along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer as not all DMX controllers

have this capability. The Color STRIKE M supports RDM protocol that allows feedback to make changes to menu map

options. Download the User Manual from www.chauvetprofessional.com for more details.

• Color STRIKE M

• Seetronic Powerkon IP65 power cord • Omega bracket

• Quick Reference Guide

Connection Wire (U.S.) Wire (Europe) Screw Color

AC Live Black Brown Yellow/Brass

AC Neutral White Blue Silver

AC Ground Green/Yellow Green/Yellow Green

To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely

disconnect the product from power via breaker or by unplugging it.

QUICK REFERENCE GUIDE

Color STRIKE M QRG Rev. 7

Mounting

Before mounting this product, read the Safety Notes. Use at least two mounting point per product. Make sure the

mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to

http://trusst.com/productcategory/truss-clamps/.

Mounting Diagram

Use only the DOWN orientation when mounting the fixture from the side/arm.

Safety cable

Mounting clamp

Omega bracket

Color STRIKE M QRG Rev. 7

QUICK REFERENCE GUIDE

Control Panel Description

Menu Map

Refer to the Color STRIKE M product page on www.chauvetprofessional.com for the latest menu map.

Button Function

<MENU> Exits from the current menu or function

<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function

<UP> Navigates upwards through the menu list or increases the numeric value when in a function

<DOWN> Navigates downwards through the menu list or decreases the numeric value when in a function

Main Level Programming Levels Description

Protocol

DMX512

Sets the control protocolArt-Net

sACN

DMX Address

1–512* Selects DMX address

(*highest channel restricted to personality

chosen)

DMX Channel

8CH

Selects DMX channel

11CH

13CH

24CH

30CH

74CH

97CH

Static

Fixed Color

RRed

GGreen

BBlue

GB Green + blue

RB Red + blue

RG Red + green

RGB Red + green + blue

Manual Color Mixer

Red

0–255 Combines red, green, and blue to make a

custom color (0–100%)

Green

Blue

Plate FX

Plate FX 1

Plate FX 2

Plate FX 3

Plate FX 4

Plate FX 5

Plate FX 6

Plate FX 7

Plate FX 8

Plate FX 9

Speed 1–100 Adjusts the plate movement speed

Plate Intensity 000–255 Adjusts the plate light intensity

Background Color

Selects background color

RGB

Off Turns off background color

Foreground Color

Selects foreground color

RGB

Off Turns off foreground color

QUICK REFERENCE GUIDE

Color STRIKE M QRG Rev. 7

Beam Intensity

000–255 Adjusts the beam light intensity

Beam Flash

Duration

000–255 Adjusts the duration of the beam flash

Beam Flash Rate

000–255 Adjusts the beam flash rate

Tilt

000–255 Adjusts the tilt range from 0° to 180°

Tilt Offset

000–255 Adjusts the tilt offset range

Tilt Invert

No Inverts the default tilt orientation

Yes

Pixel Invert

Plate1 Invert No

Inverts the beam and plate pixels

individually. Reverts to default setting with

a factory reset.

Yes

Plate2 Invert No

Yes

Tube1 Invert No

Yes

Tube2 Invert No

Yes

LED Array Swap

Plate Swap No Swaps the plate and beam pixel

mapping. Keeps the setting even after a

factory reset.

Yes

Beam Swap No

Yes

Master/Slave

Master DMX mode (master)

Slave Slave mode

Dimmer Mode

OFF Linear dimmer

DIM1–3 Dimming curves: Dimmer 1 (fast) to

Dimmer 3 (slow)

White Balance

Off Turns white balance off

Manual

Red Combines red, green, and blue to create

custom color

Green 125–255

Blue

LED Frequency

600Hz

Sets the Pulse Width Modulation (PWM)

frequency

1200Hz

2000Hz

4000Hz

6000Hz

25000Hz

Fan Mode

Auto Sets fan to auto — fan speed adjusts

according to product temperature

On Turns fan on

Display Invert

No Inverts the default display mode

Yes

Backlight

10s

Turns off display backlight after

10 seconds of inactivity

30s

Turns off display backlight after

30 seconds of inactivity

2Min

Turns off display backlight after

2 minutes of inactivity

Always On

Display backlight remains on

Key Lock

On Locks the control panel

Off Keeps the control panel unlocked

Ethernet Setting

Universe

0–255 (ArtNet) Sets the universe

1–255 (sACN)

IP Address 2.192.0.1

Sets the IP address

Main Level Programming Levels Description

Color STRIKE M QRG Rev. 7

QUICK REFERENCE GUIDE

USB Software Update

The Color STRIKE M allows for software updates with a USB device using the built-in USB port. To update the software

using a USB flash drive, do the following:

1. Power on the fixture, and plug the flash drive into the USB port.Once the flash drive has been detected, the

message “Upgrade Firmware” will be displayed. Press <ENTER>.

• If a different message appears on the display, search for the updated software in the Main Menu (Update

Firmware) and select from Only This Unit, Multiple Units, or Other Fixture Type. A list of the software

update files will be displayed.

2. Select the file that needs to be uploaded. The message “Are you sure?” will be displayed. Press <ENTER>.

3. If the selected file is correct, the upgrade will be completed. Restart the fixture.

• If the selected file is incorrect, the upgrade will fail, and the display will go back to the main interface. Repeat

steps 1–3 using the correct file.

Information

Fixture Hours:

_ _ _Hours

Displays total hours the product has been

powered on

LED Hours:

_ _H

Displays the total LED hours

Disp Ver:

V_._ _ _ _ _ _

Displays firmware version

Drv-Y Ver:

V_._

Displays the tilt PCB version

LED-A Ver:

V_._

Displays the LED A PCB version

LED-C Ver:

V_._

Displays the LED C PCB version

Net Ver:

V_ _

Displays the network version

UID

_ _ _ _ _ _ _ _ _ _ _ _ _ _

Displays product UID

Upgrade

Firmware

Only This Fixture _ _ _ _ _ _.CHL Selects an update file for this product, or

shows “No such file!”

...

Multiple Fixtures _ _ _ _ _ _.CHL Selects an update file for this and

connected Color STRIKE M products, or

shows “No such file!”

...

Other Fixture Type _ _ _ _ _ _.CHL Selects an update file for other connected

products, or shows “No such file!”

...

Factory Reset

No Resets settings to factory default

Yes

The .chl format file needs to be placed in the “STRIKE” folder in the USB flash drive.

The “Other Fixture Type” option can only be selected for connected products compatible with the

Upload 03 (the first 2 digits of the item code must be 03).

Main Level Programming Levels Description

QUICK REFERENCE GUIDE

Color STRIKE M QRG Rev. 7

DMX Values

97CH

Channel Function Value Percent/Setting

1Tilt 000 255 0–100%

2 Fine tilt 000 255 0–100%

3 Master dimmer 000 255 0–100%

4 Plate dimmer 000 255 0–100%

5 Beam dimmer 000 255 0–100%

6 Plate flash duration

000 009 Classic shutter mode: disables duration control

010 250 Slow to fast

251 255 100% On, no flash/strobe

7 Plate flash rate

000 009 100%

010 250 Slow to fast

251 255 100%

8 Beam flash duration

000 009 Classic shutter mode: disables duration control

010 250 Slow to fast

251 255 100% On, no flash/strobe

9 Beam flash rate

000 009 100%

010 250 Slow to fast

251 255 100% on

10 Plate pixel 1 red 000 255 0–100%

11 Plate pixel 1 green 000 255 0–100%

12 Plate pixel 1 blue 000 255 0–100%

13 Plate pixel 2 red 000 255 0–100%

14 Plate pixel 2 green 000 255 0–100%

15 Plate pixel 2 blue 000 255 0–100%

16 Plate pixel 3 red 000 255 0–100%

17 Plate pixel 3 green 000 255 0–100%

18 Plate pixel 3 blue 000 255 0–100%

19 Plate pixel 4 red 000 255 0–100%

20 Plate pixel 4 green 000 255 0–100%

21 Plate pixel 4 blue 000 255 0–100%

22 Plate pixel 5 red 000 255 0–100%

23 Plate pixel 5 green 000 255 0–100%

24 Plate pixel 5 blue 000 255 0–100%

25 Plate pixel 6 red 000 255 0–100%

26 Plate pixel 6 green 000 255 0–100%

27 Plate pixel 6 blue 000 255 0–100%

28 Plate pixel 7 red 000 255 0–100%

29 Plate pixel 7 green 000 255 0–100%

30 Plate pixel 7 blue 000 255 0–100%

31 Plate pixel 8 red 000 255 0–100%

32 Plate pixel 8 green 000 255 0–100%

33 Plate pixel 8 blue 000 255 0–100%

34 Plate pixel 9 red 000 255 0–100%

35 Plate pixel 9 green 000 255 0–100%

36 Plate pixel 9 blue 000 255 0–100%

37 Plate pixel 10 red 000 255 0–100%

38 Plate pixel 10 green 000 255 0–100%

39 Plate pixel 10 blue 000 255 0–100%

40 Plate pixel 11 red 000 255 0–100%

41 Plate pixel 11 green 000 255 0–100%

42 Plate pixel 11 blue 000 255 0–100%

43 Plate pixel 12 red 000 255 0–100%

44 Plate pixel 12 green 000 255 0–100%

45 Plate pixel 12 blue 000 255 0–100%

Color STRIKE M QRG Rev. 7

QUICK REFERENCE GUIDE

46 Plate pixel 13 red 000 255 0–100%

47 Plate pixel 13 green 000 255 0–100%

48 Plate pixel 13 blue 000 255 0–100%

49 Plate pixel 14 red 000 255 0–100%

50 Plate pixel 14 green 000 255 0–100%

51 Plate pixel 14 blue 000 255 0–100%

52 Beam pixel 1 000 255 0–100%

53 Beam pixel 2 000 255 0–100%

54 Beam pixel 3 000 255 0–100%

55 Beam pixel 4 000 255 0–100%

56 Beam pixel 5 000 255 0–100%

57 Beam pixel 6 000 255 0–100%

58 Beam pixel 7 000 255 0–100%

59 Beam pixel 8 000 255 0–100%

60 Beam pixel 9 000 255 0–100%

61 Beam pixel 10 000 255 0–100%

62 Beam pixel 11 000 255 0–100%

63 Beam pixel 12 000 255 0–100%

64 Beam pixel 13 000 255 0–100%

65 Beam pixel 14 000 255 0–100%

66 Beam pixel 15 000 255 0–100%

67 Beam pixel 16 000 255 0–100%

68 Beam pixel 17 000 255 0–100%

69 Beam pixel 18 000 255 0–100%

70 Beam pixel 19 000 255 0–100%

71 Beam pixel 20 000 255 0–100%

72 Beam pixel 21 000 255 0–100%

73 Beam pixel 22 000 255 0–100%

74 Beam pixel 23 000 255 0–100%

75 Beam pixel 24 000 255 0–100%

76 Beam pixel 25 000 255 0–100%

77 Beam pixel 26 000 255 0–100%

78 Beam pixel 27 000 255 0–100%

79 Beam pixel 28 000 255 0–100%

80 Beam FX

000 005 No function

006 042 Ramp up

043 085 Ramp down

086 128 Ramp up-down

129 171 Random

172 214 Lightning

215 255 Spikes

Channel Function Value Percent/Setting

QUICK REFERENCE GUIDE

Color STRIKE M QRG Rev. 7

81 Plates foreground

000 000 No function

001 002 White (2700K)

003 004 White (3200K)

005 006 White (4200K)

007 008 White (5600K)

009 010 White (8000K)

011 Blue R: 0 G: 0 B: 255 W: 0

012 048 Green+ / Blue R: 0 G: + B: 255 W: 0

049 Cyan R: 0 G: 255 B: 255 W: 0

050 086 Green / Blue- R: 0 G: 255 B: - W: 0

087 Green R: 0 G: 255 B: 0 W: 0

088 124 Red+ / Green R: + G: 255 B: 0 W: 0

125 Yellow R: 255 G: 255 B: 0 W: 0

126 162 Red / Green- R: 255 G: - B: 0 W: 0

163 Red R: 255 G: 0 B: 0 W: 0

164 200 Red / Blue+ R: 255 G: 0 B: + W: 0

201 Magenta R: 255 G: 0 B: 255 W: 0

202 238 Red- / Blue R: - G: 0 B: 255 W: 0

239 Blue R: 0 G: 0 B: 255 W: 0

240 247 Color index, fast to slow

248 255 Color snap, fast to slow

82 Plate foreground dimmer 000 255 0–100%

83 Plates background

000 000 No function

001 002 White (2700K)

003 004 White (3200K)

005 006 White (4200K)

007 008 White (5600K)

009 010 White (8000K)

011 Blue R: 0 G: 0 B: 255 W: 0

012 048 Green+ / Blue R: 0 G: + B: 255 W: 0

049 Cyan R: 0 G: 255 B: 255 W: 0

050 086 Green / Blue- R: 0 G: 255 B: - W: 0

087 Green R: 0 G: 255 B: 0 W: 0

088 124 Red+ / Green R: + G: 255 B: 0 W: 0

125 Yellow R: 255 G: 255 B: 0 W: 0

126 162 Red / Green- R: 255 G: - B: 0 W: 0

163 Red R: 255 G: 0 B: 0 W: 0

164 200 Red / Blue+ R: 255 G: 0 B: + W: 0

201 Magenta R: 255 G: 0 B: 255 W: 0

202 238 Red- / Blue R: - G: 0 B: 255 W: 0

239 Blue R: 0 G: 0 B: 255 W: 0

240 247 Color index, fast to slow

248 255 Color snap, fast to slow

84 Plates background dimmer 000 255 0–100%

85 Plate 1 (pixels 1–7) FX select

(see Pixel Mapping)

000 002 Plate FX All select (all on)

003 255 Plate FX pattern select

86 Plate 1 (pixels 1–7) FX

movement speed & direction

(see Pixel Mapping)

000 005 No function

006 124 Left to right, fast to slow

125 130 No function

131 249 Right to left, slow to fast

250 255 No function

Plate 1 (pixels 1–7) FX

crossfade

(see Pixel Mapping)

000 002 Snap from pixel to pixel

003 255 Fade duration: short to long

88 Plate 2 (pixels 8–14)

FX select (see Pixel Mapping)

000 002 Plate FX All select (all on)

003 255 Plate FX pattern select

Channel Function Value Percent/Setting

Inhaltsverzeichnis

Sprachen:

Andere Chauvet Professional Beleuchtungsausrüstung Handbücher

Chauvet Professional

Chauvet Professional REM-RB50CM IP Curve Bedienungsanleitung

Chauvet Professional

Chauvet Professional Strike Array 2 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation E-190WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation H-265WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional onAir IP Panel 2 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-55WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION-F-915-VW Bedienungsanleitung

Chauvet Professional

Chauvet Professional REM-RB200CM IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional MT-07 Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado 2 Zoom Tour Bedienungsanleitung

Chauvet Professional

Chauvet Professional REM-RB200CM IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional STRIKEARRAY4 Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado Panel Q40 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-145WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-H12XIP Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-H18X Bedienungsanleitung

Chauvet Professional

Chauvet Professional Colorado 1 Quad Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick Silens 2 Profile Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation FD-205WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUEOUTCAST2HYBRID Bedienungsanleitung

Chauvet Professional

Chauvet Professional STRIKE 1 Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUEOUTCAST2HYBRID Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick Storm 2 BeamWash Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick Storm 2 BeamWash Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung