Chauvet Professional Maverick Storm 2 BeamWash Bedienungsanleitung

Model ID: MAVERICKSTORM2BEAMWAS

User Manual

Maverick Storm 2 BeamWash User Manual Rev. 2

Edition Notes

The Maverick Storm 2 BeamWash User Manual includes a description, safety precautions, installation,

programming, operation and maintenance instructions for the Maverick Storm 2 BeamWash as of the

release date of this edition.

Trademarks

CHAUVET, the Chauvet logo and Maverick Storm 2 BeamWash are registered trademarks or trademarks

of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries.

Other company and product names and logos referred to herein may be trademarks of their respective

companies.

The works of authorship contained in this manual, including, but not limited to, all design, text and images

are owned by Chauvet.

Electronically published by Chauvet in the United States of America.

Manual Use

Chauvet authorizes its customers to download and print this manual for professional information purposes

only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this

manual or its content for any other purpose without written consent from Chauvet.

Document Printing

For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4

paper (210 x 297 mm), configure the printer to scale the content accordingly.

Intended Audience

Any person installing, operating, and/or maintaining this product should completely read through the guide

that shipped with the product, as well as this manual, before installing, operating, or maintaining this

product.

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However,

Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,

damage or disruption caused by any errors or omissions in this document, whether such errors or

omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the

content of this document without any obligation to notify any person or company of such revision, however,

Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest

version from www.chauvetprofessional.com.

Document Revision

This Maverick Storm 2 BeamWash User Manual is the 2nd edition of this document. Go to

www.chauvetprofessional.com for the latest version.

Maverick Storm 2 BeamWash User Manual Rev. 2

Table of Contents

TABLE OF CONTENTS

1. Before You Begin ....................................................................... 1

What Is Included ........................................................................................... 1

Claims ........................................................................................................... 1

Text Conventions .......................................................................................... 1

Symbols ........................................................................................................ 1

FCC Compliance........................................................................................... 1

RF Exposure Warning for North America, and Australia............................... 1

Safety Notes.................................................................................................. 2

Personal Safety.................................................................................................. 2

Mounting and Rigging ........................................................................................ 2

Power and Wiring............................................................................................... 2

Operation ........................................................................................................... 2

Expected LED Lifespan................................................................................. 2

2. Introduction ................................................................................ 3

Description .................................................................................................... 3

Features........................................................................................................ 3

Product Overview.......................................................................................... 3

Product Dimensions ...................................................................................... 4

3. Setup ........................................................................................... 5

AC Power...................................................................................................... 5

AC Plug .............................................................................................................. 5

Fuse Replacement ............................................................................................. 5

Signal Connections ....................................................................................... 5

Control Personalities .......................................................................................... 5

DMX Linking....................................................................................................... 5

Art-Net™ Connection ......................................................................................... 6

sACN Connection............................................................................................... 6

Connection Diagram .......................................................................................... 6

Remote Device Management (RDM) ............................................................ 6

USB Software Update ................................................................................... 6

Mounting ....................................................................................................... 7

Orientation.......................................................................................................... 7

Rigging ............................................................................................................... 7

Procedure........................................................................................................... 7

4. Operation .................................................................................... 8

Control Panel Description ............................................................................. 8

Battery Powered Display.................................................................................... 8

Home Screen ................................................................................................ 8

Control Panel Lock........................................................................................ 8

Passcode ........................................................................................................... 8

Technician Mode........................................................................................... 8

Menu Map ..................................................................................................... 9

Configuration (Control Settings).................................................................... 15

Control Mode...................................................................................................... 15

Control Personalities .......................................................................................... 15

Starting Address................................................................................................. 15

Table of Contents

Maverick Storm 2 BeamWash User Manual Rev. 2

Universe ............................................................................................................. 16

Network Setup.................................................................................................... 16

IP Mode ................................................................................................................... 16

Manual IP Address .................................................................................................. 16

Subnet Mask............................................................................................................ 16

Control Channel Assignments and Value ..................................................... 16

Pixel Chart.......................................................................................................... 16

Single Control Mode........................................................................................... 17

Dual Control Mode (Movement) ......................................................................... 25

Dual Control Mode (Pixels) ................................................................................ 27

Color Chart......................................................................................................... 32

Strobe Chart....................................................................................................... 32

Control Chart...................................................................................................... 33

Configuration (Test) ...................................................................................... 33

Automatic Test ................................................................................................... 33

Manual Test ....................................................................................................... 33

Configuration (Settings) ................................................................................ 33

Pan Reverse ...................................................................................................... 33

Tilt Reverse ........................................................................................................ 33

Screen Reverse ................................................................................................. 34

Pan Angle........................................................................................................... 34

Tilt Angle ............................................................................................................ 34

Blackout on Movement....................................................................................... 34

Swap Pan and Tilt .............................................................................................. 34

WDMX Reset ..................................................................................................... 34

Display Backlight Timer...................................................................................... 34

Loss of Data ....................................................................................................... 34

Fan Mode ........................................................................................................... 34

Color Mixing Mode ............................................................................................. 35

Dimmer Curve .................................................................................................... 35

Dimmer Speed ................................................................................................... 35

Pulse Width Modulation ..................................................................................... 35

Color Balance..................................................................................................... 35

Calibrated White................................................................................................. 35

Color Balance .......................................................................................................... 35

Preset Selection ................................................................................................. 35

Preset Synchronization ...................................................................................... 36

Reset Function ................................................................................................... 36

Factory Reset..................................................................................................... 36

System Information ....................................................................................... 36

Offset Mode (Zero Adjust)............................................................................. 36

Web Server ................................................................................................... 37

5. Maintenance................................................................................ 38

Product Maintenance .................................................................................... 38

6. Technical Specifications ........................................................... 39

Returns............................................................................................ 40

Maverick Storm 2 BeamWash User Manual Rev. 2

Before You Begin

1. Before You Begin

What Is Included

Claims

Carefully unpack the product immediately and check the container to make sure all the parts are in the

package and are in good condition.

If the box or the contents (the product and included accessories) appear damaged from shipping, or show

signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier

immediately may invalidate your claim. In addition, keep the box and contents for inspection.

For other issues, such as missing components or parts, damage not related to shipping, or concealed

damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Symbols

FCC Compliance

This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

RF Exposure Warning for North America, and Australia

Warning! This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance of 20cm between

the radiator and your body. This transmitter must not be co-located or operating in conjunction with any

other antenna or transmitter.

• Maverick Storm 2 BeamWash

• Seetronic Powerkon IP65 Power Cord

• 2 Omega Brackets with Mounting Hardware

• Quick Reference Guide

Convention Meaning

1–512 A range of values

50/60 A set of values of which only one can be chosen

Settings A menu option not to be modified

<ENTER> A key to be pressed on the product’s control panel

Symbol Meaning

Critical installation, configuration, or operation information. Not following these

instructions may make the product not work, cause damage to the product, or cause

harm to the operator.

Important installation or configuration information. The product may not function

correctly if this information is not used.

Useful information.

Any reference to data or power connections in this manual assumes the use of Seetronic

IP rated cables.

The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data

transmission protocol.

Before You Begin

Maverick Storm 2 BeamWash User Manual Rev. 2

Safety Notes

Read all the following safety notes before working with this product. These notes contain important

information about the installation, usage, and maintenance of this product.

Personal Safety

• Avoid direct eye exposure to the light source while the product is on.

• Always disconnect the product from the power source before cleaning or replacing the fuse.

• Always connect the product to a grounded circuit to avoid the risk of electrocution.

• Do not touch the product’s housing when operating because it may be very hot.

Mounting and Rigging

• The product is intended for professional use only.

• Do not submerge this product (IP65). Temporary outdoor operation is fine.

• When using this product in an outdoor environment, use IP65 (or higher) rated power and data

cables. Secure unused power and data ports with attached IP65 covers.

•

CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm

humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a

failure, allow product to fully acclimate to the surrounding environment before connecting it to power.

• Not for permanent outdoor installation in locations with extreme environmental conditions. This

includes, but is not limited to:

• Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).

• Locations where the normal high or low temperatures exceed the temperature ranges in this manual.

• Locations that are prone to flooding or being buried in snow.

• Areas where the product will be subjected to extreme radiation or caustic substances.

• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

• The product should be positioned so that prolonged staring into it at a distance closer than 17.7 ft

(5.4 m) is not expected.

• Make sure there are no flammable materials within 20 in (50 cm) of this product while it is operating.

• When hanging this product, always secure to a fastening device using a safety cable.

• Never carry the product by the power cord.

Power and Wiring

• Make sure the power cord is not crimped or damaged.

• Ensure that the product is connected to the proper voltage in accordance with the specifications in

this manual or on the product’s specification label.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely

disconnect the product from power via breaker or by unplugging it.

• Never connect this product to a dimmer pack or rheostat.

• Make sure to replace the fuse with another of the same type and rating.

• Never disconnect this product by pulling or tugging on the power cable.

• If the external flexible cable or cord of this product is damaged, it shall be replaced with a special

cable or cord exclusively available from the manufacturer or its service agent.

• The light source contained in this luminaire shall only be replaced by the manufacturer, its service

agent, or a similarly qualified person.

Operation

• Do not operate this product if there is damage on the housing, lenses, or cables. Have the damaged

parts replaced by an authorized technician at once.

• Do not cover the ventilation slots when operating to avoid internal overheating.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate the product at higher temperatures.

• The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.

• The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.

• In the event of a serious operation problem, stop using this product immediately!

Expected LED Lifespan

Over time, use and heat will gradually reduce LED brightness. Clustered LEDs produce more heat than single

LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is 40,000 to 50,000

hours. To extend LED lifespan, maintain proper ventilation around the product, and limit the overall intensity.

This product contains no user-serviceable parts. Any reference to servicing in this User

Manual will only apply to properly trained, certified technicians. Do not open the housing

or attempt any repairs.

All applicable local codes and regulations apply to proper installation of this product.

If your Chauvet product requires service, contact Chauvet Technical Support.

Maverick Storm 2 BeamWash User Manual Rev. 2

Introduction

2. Introduction

Description

The Maverick Storm 2 BeamWash is a powerful and compact IP65 moving head with a zoom range

capable of wide 53.1° washes and intense tight 3.6° beams. An incredibly bright output of nearly 10,000

lumens and a low weight under 40 lbs makes the Maverick Storm 2 BeamWash well-suited for any

application or venue size. Pixel-mapping effects, including a 12-zone RGB LED outer ring, add to the unit’s

versatility; and a virtual gobo wheel with background colors creates an array of immersive atmospheric

effects. The RDM-enabled unit features 16-bit dimming and can be controlled via DMX, WDMX, Art-Net™,

sACN, and Arkaos Kling-Net.

Features

• Full-featured, compact IP65 BeamWash with (19) 50 w RGBW LEDs that zoom down to 3.6

degrees to produce powerful, tight aerial beams and out to 53.1 degrees for wide washes and

individual pixel control for stunning eye candy effects

• 3.6° to 55° zoom range

• 12 zone pixel-mappable RGB LED outer ring under a stealth filter for added effect possibilities

• Incredibly bright! Almost 10,000 lumens!

• Low weight: under 40 lbs

• 16-bit dimming of master dimmer and individual colors for smooth control of fades

• Fully pixel mappable LEDs

• Built in LED macros with foreground and background control for easy generation of pixel effects

• Unique lens design for excellent color blending and tight beam effects

• Fast, smooth pan and tilt movement

• User selectable full output 7500 K calibrated white

• Selectable PWM settings for camera operation

• 6 distinct dimming modes for advanced control

• Simple and complex DMX channel profiles for programming versatility including dual mode

operation.

• 5-pin DMX input/output connections

• RDM Enabled for remote addressing & trouble shooting

• Easy to read OLED display with simple, effective menu options

• USB-C port for convenient software uploads

Product Overview

buttons

LCD

display

DMX

in/out

Carry

handle

Fuse

holder

Ethernet

ports

WDMX

antenna

USB

port

Power

Introduction

Maverick Storm 2 BeamWash User Manual Rev. 2

Product Dimensions

4.88 in

124 mm

15.28 in

388 mm

15.28 in

388 mm

9.98 in

253.5 mm

12.28 in

312 mm

10.26 in

260.7 mm

11.42 in

290 mm

19.72 in

501 mm

Maverick Storm 2 BeamWash User Manual Rev. 2

Setup

3. Setup

AC Power

The Maverick Storm 2 BeamWash has an auto-ranging power supply and it can work with an input voltage

range of 100 to 240 VAC, 50/60 Hz.

To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current

value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.

The listed current rating indicates the product’s average current draw under normal conditions.

AC Plug

The Maverick Storm 2 BeamWash comes with a power input cord terminated with a Seetronic Powerkon A

connector on one end and an Edison plug on the other end (U.S. market). If the power input cord that came

with the product has no plug, or if you need the change the plug, use the table below to wire the new plug.

Fuse Replacement

1. Disconnect this product from the power outlet.

2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.

3. Remove the blown fuse and replace with another fuse of the same type and rating (F 20 A, 250 V).

4. Screw the fuse holder cap back in place and reconnect power.

Signal Connections

The Maverick Storm 2 BeamWash can receive a DMX, Art-Net™, sACN, or Kling-Net signal. The

Maverick Storm 2 BeamWash has 2 Neutrik RJ45 through ports, and 5-pin DMX in and out ports. If using

other compatible products with this product, each can be controlled individually with a single controller.

Control Personalities

The Maverick Storm 2 BeamWash uses a 5-pin DMX data connection, WDMX, Art-Net™, sACN, or Kling-

Net for its control personalities:

• Refer to the Operation chapter to learn how to configure the Maverick Storm 2 BeamWash to work

in these personalities.

•TheControl Channel Assignments and Value section provides detailed information regarding the

control personalities.

DMX Linking

You can link the Maverick Storm 2 BeamWash to a DMX controller using a 5-pin DMX connection or a

WDMX connection. For more information about DMX, read the DMX primer at: https://

www.chauvetprofessional.com/wp-content/uploads/2016/06/DMX_Primer.pdf.

• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure

the product has an appropriate electrical ground to avoid the risk of electrocution or fire.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the

rheostat or dimmer channel serves only as a 0 to 100% switch.

Connection Wire (U.S.) Wire (Europe) Screw Color

AC Live Black Brown Yellow or Brass

AC Neutral White Blue Silver

AC Ground Green/Yellow Green/Yellow Green

Single Control Dual Control Movement Dual Control Pixels

Basic (31-channel) Basic (11-channel) Basic (93-channel)

Standard (143-channel) Standard (34-channel) Standard (112-channel)

Advanced (263-channel) Advanced (45-channel) Advanced (224-channel)

Tour (325-channel)

Basic2 (37-channel)

In Dual Control mode, the Movement protocol and the Pixels protocol cannot be the same.

If more information is needed about DMX standards or the DMX cables required to link this

product to a DMX controller, download the DMX Primer from the Chauvet website:

www.chauvetprofessional.com.

Setup

Maverick Storm 2 BeamWash User Manual Rev. 2

Art-Net™ Connection

Art-Net™ is an Ethernet protocol that uses TCP/IP which transfers a large amount of DMX512 data using a

Neutrik RJ45 connection over a large network. An Art-Net™ protocol document is available from

www.chauvetprofessional.com.

Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.

sACN Connection

Also known as ANSI E1.31, streaming ACN is an Ethernet protocol that uses the layering and formatting of

Architecture for Control Networks to transport DMX512 data over IP or any other ACN compatible network.

Connection Diagram

Remote Device Management (RDM)

Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate

bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the

manufacturer as not all DMX controllers have this capability. The Maverick Storm 2 BeamWash supports

RDM protocol that allows feedback to make changes to menu map options.

USB Software Update

The Maverick Storm 2 BeamWash allows for software update through USB using the built-in USB port. To

update the software using USB flash drive, do the following:

1. Power on the fixture and plug the flash drive into the USB port.

2. Once the flash drive has been detected, the message “Upgrade Firmware” will be displayed. Press

<ENTER>

. If a different message appears on the display, search for the updated software in the

Menu (Updated Firmware)

. A list of the updated software files will be displayed.

3. Select the file that needs to be uploaded. The message “Are you sure?” will be displayed. Press

<ENTER>

4. If the selected file is correct, the upgrade will be completed. Restart the fixture. If the selected file is

incorrect, the upgrade will fail, and the display will go back to the main interface. Repeat steps 1-3

using the correct file.

The three LED indicators in between the ethernet through ports indicate a connection to a

network and activity on that network. They do not indicate whether or not the

Maverick Storm 2 BeamWash is receiving a signal from a controller.

Computer/

Controller

(running Art-Net™

or sACN protocol)

Switch or Router

Maverick Storm 2 BeamWash

To other Art-Net™ or sACN devices

Andere Handbücher für Maverick Storm 2 BeamWash

Inhaltsverzeichnis

Andere Chauvet Professional Beleuchtungsausrüstung Handbücher

Chauvet Professional

Chauvet Professional COLORado Batten 144 Tour Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION P-56VW Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-Quad 18 Bedienungsanleitung

Chauvet Professional

Chauvet Professional REMRB50CMIPCURVE Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation E-190WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional onAirPanel1IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado 1QS Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION MIN-E-10WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional 91LEDs Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLOR Strike M Bedienungsanleitung

Chauvet Professional

Chauvet Professional Rogue R3 Beam Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUEOUTCAST2HYBRID Bedienungsanleitung

Chauvet Professional

Chauvet Professional STRIKEARRAY4 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation FD-205WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional MAVERICK STOM 2 PROFILE Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-H18X Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-145WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional STRIKE 4 Bedienungsanleitung

Chauvet Professional

Chauvet Professional WELL Gobo Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick MK3 Profile Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation H-55WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R1 FX-B Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation H-265WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado 2 Zoom Tour Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung