Chauvet Professional STRIKEARRAY4 Bedienungsanleitung

Quick Reference Guide

English EN

Español ES

Français FR

Deutch DE

Nederlands NL

Model ID: STRIKEARRAY4

QUICK REFERENCE GUIDE

Strike Array 4 QRG Rev. 4

About This Guide

The Strike Array 4 Quick Reference Guide (QRG) has basic product information such as connection, mounting, menu

options, and DMX values. Download the User Manual from www.chauvetprofessional.com for more details.

Disclaimer

The information and specifications contained in this QRG are subject to change without notice.

LIMITED WARRANTY

FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.

For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.

For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and

Germany: www.chauvetlighting.eu/warranty-registration.

Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the

period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This

warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this

warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows

the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This

warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to

country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,

Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.

Safety Notes

• The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 7.5 ft

(2.3 m) is not expected.

• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord

exclusively available from the manufacturer or his service agent.

• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a

similar qualified person.

• The luminaire is intended for professional use only.

• DO NOT open this product. It contains no user-serviceable parts.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the

product from power via breaker or by unplugging it.

• DO NOT look at the light source when the product is on.

• CAUTION: This product’s housing may be hot when lights are operating. Mount this product in a location with

adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

• DO NOT leave any flammable material within 50 cm of this product while operating or connected to power.

• CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm humid

ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow

product to fully acclimate to the surrounding environment before connecting it to power.

• USE a safety cable when mounting this product overhead.

• DO NOT submerge this product (IP65). Regular outdoor operation is fine.

• DO NOT operate this product if the housing, lenses, or cables appear damaged.

• DO NOT connect this product to a dimmer or rheostat.

• ONLY connect this product to a grounded and protected circuit.

• ONLY use the hanging/mounting bracket or the handles to carry this product.

• In the event of a serious operating problem, stop using immediately.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.

FCC Compliance

This device complies with Part 15 Part B of the FCC Rules. Operations is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

Contact

Outside the US, UK, Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or return a

product. Refer to Contact Us at the end of this QRG for contact information.

What is Included

•StrikeArray4

• Seetronic Powerkon IP65 power cord • Omega bracket with mounting hardware

• Quick Reference Guide

Strike Array 4 QRG Rev. 4

QUICK REFERENCE GUIDE

AC Power

This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.

Power Linking

You can link up to 5 Strike Array 4 products at 100 V, 6 products at 120 V, 11 products at 208 V, 12 products at 230 V, or

12 products at 240 V. Never exceed this number. Power linking cords can be purchased separately.

AC Plug

DMX Linking

The Strike Array 4 will work with a DMX controller using a 5-pin DMX serial connection. A DMX Primer is available from

www.chauvetprofessional.com.

DMX Connection

The Strike Array 4 uses a wireless DMX data connection for its DMX personalities: 1 Ch, 3 Ch, 4 Ch, 5 Ch, 6 Ch, and

10 Ch. See the User Manual for information about connecting and configuring the product for DMX operation.

Master/Slave Connection

The Strike Array 4 uses the DMX data connection for its Master/Slave mode. See the User Manual for information about

connect and configure the product for master/slave operation.

RDM (Remote Device Management)

Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally

along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer as not all DMX controllers

have this capability. The Strike Array 4 supports RDM protocol that allows feedback to make changes to some menu map

options. Download the User Manual from www.chauvetprofessional.com for more details.

Mounting

Before mounting this product, read the Safety Notes. Make sure the mounting clamps are capable of supporting the

weight of the product. For our Chauvet line of mounting clamps, go to http://trusst.com/productcategory/truss-clamps/.

Product Mounting Diagram

Connection Wire (U.S.) Wire (Europe) Screw Color

AC Live Black Brown Yellow/Brass

AC Neutral White Blue Silver

AC Ground Green/Yellow Green/Yellow Green

To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely

disconnect the product from power via breaker or by unplugging it.

Safety

cable

Mounting

clamp

Omega

bracket Omega

bracket Mounting

clamp Safety

cable

Safety

cable

Mounting

clamp

QUICK REFERENCE GUIDE

Strike Array 4 QRG Rev. 4

Multi-Product Mounting

The Strike Array 4 has an interlocking system to connect multiple Strike Array 4 or Strike Array 2 products together,

vertically or horizontally. Make sure the mounting clamps are capable of supporting the weight of the product. For our

Chauvet line of mounting clamps, go to http://trusst.com/productcategory/truss-clamps/.

Multi-Product Mounting Diagram

Insert the integrated

hanging hardware into the

opening of the next product

(vertically or horizontally)

Insert the retaining

pins to lock the

products together

Press and hold the latch

button to remove or

insert the retaining pins

Latch

button

Remove the retaining pins

to release the integrated

hanging hardware

Strike Array 4 QRG Rev. 4

QUICK REFERENCE GUIDE

Mounting Products Attached in Series

• When using the omega bracket, never hang more than 16 cells vertically from a single mounting

point.

• When not using the omega bracket, never hang more than 8 cells vertically from a single mounting

point.

With Omega Bracket Without Omega Bracket

Attach the

safety cable

of the first

product to the

mounting

point

Attach the

safety cables

of the following

products to the

preceding

product

Each

Strike Array 4

product is 4

cells

Up to

16 cells

Up to

8 cells

QUICK REFERENCE GUIDE

Strike Array 4 QRG Rev. 4

Vertical Mounting Stability

When mounting products attached in series, use omega brackets in the back position to create a spine. This will prevent

any motion which may damage the products.

Omega

brackets

Mounting

clamps

Pole or pipe

for stability

Strike Array 4 QRG Rev. 4

QUICK REFERENCE GUIDE

Control Panel Description

Passcode

After being prompted, enter the following passcode by pressing: <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.

This passcode cannot be changed and must be used whenever prompted.

Menu Map

Refer to the Strike Array 4 product page on www.chauvetprofessional.com for the latest menu map.

Button Function

<MENU> Exits from the current menu or function

<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function

<UP> Navigates upwards through the menu list or increases the numeric value when in a function

<DOWN> Navigates downwards through the menu list or decreases the numeric value when in a function

Main Level Programming Levels Description

Start

Address 001–512* Selects starting address (*highest channel restricted to

personality chosen)

DMX Channel

1 Ch 1-channel: Dimmer

3 Ch 3-channel: Dimmer, red shift, dimmer speed mode

4 Ch

4-channel: White 1, white 2, white 3, white 4

5 Ch 5-channel: Dimmer, red shift, strobe, auto programs,

dimmer speed mode

6 Ch

6-channel: White 1, white 2, white 3, white 4, red shift, dimmer

speed mode

10 Ch

10-channel: Dimmer, 16-bit dimmer, red shift, strobe, white 1,

white 2, white 3, white 4

auto programs, dimmer speed mode

Static Dimmer 000–255

Sets the intensity of the light output

Strobe

Selects the strobe frequency

Auto Show Auto 1–6 Speed 001–100 Selects automatic programs and auto program speed

Red Shift On Turns on or off Red Shift (amber LEDs imitate lamp when

dimming)

Off

Master/Slave Master Master mode

Slave Slave mode

Dimmer

Mode

Off Linear dimmer

Dimmer 1 Fast dimmer curve

Dimmer 2 Medium dimmer curve

Dimmer 3 Slow dimmer curve

LED

Frequency

600Hz

Selects the PWM output frequency

1200Hz

2000Hz

4000Hz

25KHz

Back Light

10S Turns off display backlight after 10 seconds of inactivity

30S Turns off display backlight after 30 seconds of inactivity

2Min Turns off display backlight after 2 minutes of inactivity

Always On Display backlight always on

Key Lock On Locks display (password: <UP>, <DOWN>, <UP>,

<DOWN>, <ENTER>)

Off

QUICK REFERENCE GUIDE

Strike Array 4 QRG Rev. 4

USB Software Update

The Strike Array 4 allows for software updates with a USB device using the built-in USB port. To update the software

using a USB flash drive, do the following:

1. Power on the fixture, and plug the flash drive into the USB port.

2. Once the flash drive has been detected, the message “Upgrade Firmware” will be displayed. Press <ENTER>.

• If a different message appears on the display, search for the updated software in the Main Menu (Update

Firmware) and select from Only This Unit, Multiple Units, or Other Fixture Type. A list of the software

update files will be displayed.

3. Select the file that needs to be uploaded. The message “Are you sure?” will be displayed. Press <ENTER>.

4. If the selected file is correct, the upgrade will be completed. Restart the fixture.

• If the selected file is incorrect, the upgrade will fail, and the display will go back to the main interface. Repeat

steps 1-3 using the correct file.

Information

Fixture Hours

_ _ _ H

Shows total hours the product has been powered on

LED Hours _ _ _ H Shows the total hours the LED lights have been on

Version V_._ Shows installed software version

UID _ _ _ _ _ _ _ _ _ _ _ _ Shows product UID

Temperature

LED1:

_ _°C Individual pod temperature

LED2:

LED3:

LED4:

Update

Firmware

Only This

Unit

_ _ _ _ _ _.CHL Selects an update file for this product, or shows “No such

file!”

...

Multiple

Units

_ _ _ _ _ _.CHL Selects an update file for this and connected Strike Array 4

products, or shows “No such file!”

...

Other Fixture

Type

_ _ _ _ _ _.CHL Selects an update file for other connected products, or

shows “No such file!”

...

Factory

Reset

No Reset to factory defaults

Yes

The .chl format file needs to be placed in the “STRIKE” folder in the USB flash drive.

The “Other Fixture Type” option can only be selected for connected products compatible with the

Upload 03 (the first 2 digits of the item code must be 03).

Main Level Programming Levels Description

Strike Array 4 QRG Rev. 4

QUICK REFERENCE GUIDE

DMX Values

10 Ch

6 Ch

Channel Function Value Percent/Setting

1 Dimmer 000 255 0–100%

2 Dimmer Fine 000 255 0–100%

3 Red Shift 000 000 On

001 255 Off

4Strobe

000 010 No function

011 132 Strobe, slow to fast (all pods)

133 255 Strobe, slow to fast (random strobe macros)

5White1 000 255 0–100%

6White2 000 255 0–100%

7White3 000 255 0–100%

8White4 000 255 0–100%

9 Auto Programs

000 010 No function

011 040 Auto 1 (slow to fast)

041 080 Auto 2 (slow to fast)

081 120 Auto 3 (slow to fast)

121 160 Auto 4 (slow to fast)

161 200 Auto 5 (slow to fast)

201 240 Auto 6 (slow to fast)

241 255 No function

10 Dimmer Speed Mode*

000 051 Current dimmer speed mode

052 101 Dimmer speed mode off (linear dimmer)

102 152 Dimmer speed mode 1 (fastest)

153 203 Dimmer speed mode 2

204 255 Dimmer speed mode 3 (slowest)

*Hold desired dimmer speed value for 3 seconds, then release. This changes the dimmer speed setting

in the menu.

Channel Function Value Percent/Setting

1White1 000 255 0–100%

2White2 000 255 0–100%

3White3 000 255 0–100%

4White4 000 255 0–100%

5 Red Shift 000 000 On

001 255 Off

6 Dimmer Speed Mode*

000 051 Current dimmer speed mode

052 101 Dimmer speed mode off (linear dimmer)

102 152 Dimmer speed mode 1 (fastest)

153 203 Dimmer speed mode 2

204 255 Dimmer speed mode 3 (slowest)

*Hold desired dimmer speed value for 3 seconds, then release. This changes the dimmer speed setting

in the menu.

QUICK REFERENCE GUIDE

Strike Array 4 QRG Rev. 4

5 Ch

4 Ch

3 Ch

1 Ch

Channel Function Value Percent/Setting

1 Dimmer 000 255 0–100%

2 Red Shift 000 000 On

001 255 Off

3Strobe

000 010 No function

011 132 Strobe, slow to fast (all pods)

133 255 Strobe, slow to fast (random strobe macros)

4 Auto Programs

000 010 No function

011 040 Auto 1 (slow to fast)

041 080 Auto 2 (slow to fast)

081 120 Auto 3 (slow to fast)

121 160 Auto 4 (slow to fast)

161 200 Auto 5 (slow to fast)

201 240 Auto 6 (slow to fast)

241 255 No function

5 Dimmer Speed Mode*

000 051 Current dimmer speed mode

052 101 Dimmer speed mode off (linear dimmer)

102 152 Dimmer speed mode 1 (fastest)

153 203 Dimmer speed mode 2

204 255 Dimmer speed mode 3 (slowest)

*Hold desired dimmer speed value for 3 seconds, then release. This changes the dimmer speed setting

in the menu.

Channel Function Value Percent/Setting

1White1 000 255 0–100%

2White2 000 255 0–100%

3White3 000 255 0–100%

4White4 000 255 0–100%

Channel Function Value Percent/Setting

1 Dimmer 000 255 0–100%

2 Red Shift 000 000 On

001 255 Off

3 Dimmer Speed Mode*

000 051 Current dimmer speed mode

052 101 Dimmer speed mode off (linear dimmer)

102 152 Dimmer speed mode 1 (fastest)

153 203 Dimmer speed mode 2

204 255 Dimmer speed mode 3 (slowest)

*Hold desired dimmer speed value for 3 seconds, then release. This changes the dimmer speed setting

in the menu.

Channel Function Value Percent/Setting

1 Dimmer 000 255 0–100%

Inhaltsverzeichnis

Sprachen:

Andere Chauvet Professional Beleuchtungsausrüstung Handbücher

Chauvet Professional

Chauvet Professional Ovation P-56WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional WELLPANEL Bedienungsanleitung

Chauvet Professional

Chauvet Professional REM-RB200CM IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado 2 Zoom Tour Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation E-190WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLOR Strike M Bedienungsanleitung

Chauvet Professional

Chauvet Professional PVP S5 Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R1 FX-B Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUEOUTCAST2HYBRID Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick Force 2 Profile Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado Panel Q40 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Well Panel Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION P-56VW Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation Cyc 3 FC Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATIONH55WWBLK Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUEOUTCAST2HYBRID Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick Storm 2 BeamWash Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-415FC Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation FD-205WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION MIN-E-10WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-145WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-Quad 18 Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-Q12 IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional Vesuvio RGBA Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung