Chauvet Professional Maverick Force 2 Profile Bedienungsanleitung

Model ID: MAVERICKFORCE2PROFILE

User Manual

Maverick Force 2 Profile User Manual Rev. 4

Edition Notes

The Maverick Force 2 Profile User Manual includes a description, safety precautions, installation,

programming, operation and maintenance instructions for the Maverick Force 2 Profile as of the release

date of this edition.

Trademarks

Chauvet, Chauvet Professional, the Chauvet logo, Maverick, and Maverick Force are registered

trademarks or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United

States and other countries. Other company and product names and logos referred to herein may be

trademarks of their respective companies.

The works of authorship contained in this manual, including, but not limited to, all designs, text and images

are owned by Chauvet.

Electronically published by Chauvet in the United States of America.

Manual Use

Chauvet authorizes its customers to download and print this manual for professional information purposes

only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this

manual or its content for any other purpose without written consent from Chauvet.

Document Printing

For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4

paper (210 x 297 mm), configure the printer to scale the content accordingly.

Intended Audience

Any person installing, operating, and/or maintaining this product should completely read through the guide

that shipped with the product, as well as this manual, before installing, operating, or maintaining this

product.

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However,

Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,

damage or disruption caused by any errors or omissions in this document, whether such errors or

omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the

content of this document without any obligation to notify any person or company of such revision, however,

Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest

version from www.chauvetprofessional.com.

Document Revision

This Maverick Force 2 Profile User Manual is the 4th edition of this document. Go to

www.chauvetprofessional.com for the latest version.

Maverick Force 2 Profile User Manual Rev. 4

Table of Contents

TABLE OF CONTENTS

1. Before You Begin ....................................................................... 1

What Is Included.................................................................................. 1

Claims.................................................................................................. 1

Text Conventions................................................................................. 1

Symbols............................................................................................... 1

FCC Compliance ................................................................................. 1

RF Exposure Warning for North America, and Australia ..................... 1

Safety Notes ........................................................................................ 2

Expected LED Lifespan ....................................................................... 2

2. Introduction ................................................................................ 3

Description........................................................................................... 3

Features .............................................................................................. 3

Product Overview ................................................................................ 3

Product Dimensions ............................................................................ 4

3. Setup ........................................................................................... 5

AC Power ............................................................................................ 5

AC Plug.................................................................................................... 5

Fuse Replacement................................................................................... 5

Remote Device Management (RDM) .................................................. 5

USB Software Update ......................................................................... 5

Mounting.............................................................................................. 6

Orientation ............................................................................................... 6

Rigging..................................................................................................... 6

Procedure ................................................................................................ 6

Signal Connections.............................................................................. 7

Control Personalities................................................................................ 7

DMX Linking ............................................................................................ 7

Art-Net™ Connection............................................................................... 7

sACN Connection .................................................................................... 7

Connection Diagram................................................................................ 7

4. Operation .................................................................................... 8

Touchscreen Control Panel ................................................................. 8

Control Panel Description ........................................................................ 8

Battery Powered Display ......................................................................... 8

Home Screen....................................................................................... 8

Control Panel Lock .............................................................................. 8

Passcode ................................................................................................. 8

Technician Mode ................................................................................. 8

Menu Map............................................................................................ 9

Configuration (DMX, Art-Net™, sACN) ............................................... 14

Control Mode ........................................................................................... 14

Control Personalities................................................................................ 14

Starting Address ...................................................................................... 14

Table of Contents

Maverick Force 2 Profile User Manual Rev. 4

Network Setup ......................................................................................... 14

IP Mode ........................................................................................................ 14

Universe ....................................................................................................... 14

Manual IP Address ....................................................................................... 14

Subnet Mask ................................................................................................ 14

Control Channel Assignments and Values .......................................... 15

Configuration (Settings)....................................................................... 19

Pan Reverse ............................................................................................ 19

Tilt Reverse.............................................................................................. 19

Screen Reverse....................................................................................... 19

Pan Angle ................................................................................................ 19

Tilt Angle.................................................................................................. 19

Blackout on Movement ............................................................................ 19

Touchscreen Calibration.......................................................................... 19

Touchscreen Lock ................................................................................... 19

Swap Pan and Tilt.................................................................................... 19

WDMX Reset........................................................................................... 20

Display Backlight Timer ........................................................................... 20

Loss of Data............................................................................................. 20

Fan Mode................................................................................................. 20

Dimmer Curve.......................................................................................... 20

Pulse Width Modulation ........................................................................... 20

LED Power............................................................................................... 20

Minimum Zoom Focus ............................................................................. 20

Preset Selection....................................................................................... 21

Preset Synchronization............................................................................ 21

USB Update............................................................................................. 21

Reset Function......................................................................................... 21

Factory Reset .......................................................................................... 21

Test Mode............................................................................................ 22

Auto Test ................................................................................................. 22

Manual Test............................................................................................. 22

System Information.............................................................................. 22

Offset Mode (Zero Adjust) ................................................................... 22

Web Server.......................................................................................... 23

Gobo Wheels....................................................................................... 24

Gobo Dimensions .................................................................................... 24

Gobo Replacement.................................................................................. 25

5. Maintenance................................................................................ 26

Product Maintenance........................................................................... 26

6. Technical Specifications ........................................................... 27

Warranty & Returns ............................................................................. 28

Maverick Force 2 Profile User Manual Rev. 4

Before You Begin

1. Before You Begin

What Is Included

Claims

Carefully unpack the product immediately and check the container to make sure all the parts are in the

package and are in good condition.

If the box or the contents (the product and included accessories) appear damaged from shipping, or show

signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier

immediately may invalidate the claim. In addition, keep the box and contents for inspection.

For other issues, such as missing components or parts, damage not related to shipping, or concealed

damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Symbols

FCC Compliance

This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

RF Exposure Warning for North America, and Australia

Warning! This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance of 20cm between

the radiator and the user. This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

• Maverick Force 2 Profile

•Seetronic Powerkon IP65 Power Cable

• Omega Brackets with Mounting Hardware

• Quick Reference Guide

Convention Meaning

1–512 A range of values

50/60 A set of values of which only one can be chosen

Settings A menu option not to be modified

<ENTER> A key to be pressed on the product’s control panel

Symbol Meaning

Critical installation, configuration, or operation information. Not following these

instructions may make the product not work, cause damage to the product, or cause

harm to the operator.

Important installation or configuration information. The product may not function correctly

if this information is not used.

Useful information.

Any reference to data or power connections in this manual assumes the use of Seetronic

IP rated cables.

The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data

transmission protocol.

Before You Begin

Maverick Force 2 Profile User Manual Rev. 4

Safety Notes

Read all the following safety notes before working with this product. These notes contain important

information about the installation, usage, and maintenance of this product.

• The luminaire is intended for professional use only.

• The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than

25.59 ft (7.8 m) is not expected.

• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord

or cord exclusively available from the manufacturer or its service agent.

• The light source contained in this luminaire shall only be replaced by the manufacturer or its service

agent or a similar qualified person.

• CAUTION:

• This product’s housing may be hot when operating. Mount this product in a location with adequate

ventilation, at least 20 in (50 cm) from adjacent surfaces.

• When transferring the product from extreme temperature environments, (e.g., cold truck to warm

humid ballroom) condensation may form on the internal electronics of the product. To avoid causing

a failure, allow the product to fully acclimate to the surrounding environment before connecting it to

power.

• Flashing light is known to trigger epileptic seizures. User must comply with local laws regarding

notification of strobe use.

• ALWAYS:

• Disconnect from power before cleaning the product or replacing the fuse.

• Replace the fuse with the same type and rating.

• Use a safety cable when mounting this product overhead.

• Connect this product to a grounded and protected circuit.

•DONOT:

• Open this product. It contains no user-serviceable parts.

• Look at the light source when the product is on.

• Leave any flammable material within 50 cm of this product while operating or connected to power.

• Connect this product to a dimmer or rheostat.

• Operate this product if the housing, lenses, or cables appear damaged.

• Operate this product outdoors or in any location where dust, excessive heat, water, or humidity may

affect it (adhere to standards for the published IP rating).

• ONLY use the handles or the hanging/mounting brackets to carry this product.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher

temperatures.

• The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.

• The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely

disconnect the product from power via breaker or by unplugging it.

• In the event of a serious operating problem, stop using immediately.

Expected LED Lifespan

Over time, use and heat will gradually reduce LED brightness. Clustered LEDs produce more heat than

single LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is

40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit

the overall intensity.

This product contains no user-serviceable parts. Any reference to servicing in this User

Manual will only apply to properly trained, certified technicians. Do not open the housing

or attempt any repairs.

All applicable local codes and regulations apply to proper installation of this product.

If this Chauvet product requires service, contact Chauvet Technical Support.

Maverick Force 2 Profile User Manual Rev. 4

Introduction

2. Introduction

Description

The Maverick Force 2 Profile is a lightweight, tour-grade moving head with a big presence. The powerful

product features an output of over 20,000 lumens and an artillery of speedy effects housed in a deceptively

compact frame, under 60lbs. The Maverick Force 2 Profile features CMY + CTO color-mixing, a color

wheel with a CTB and CRI option, and an extensive zoom range of 7 to over 50 degrees that maintains a

flat field of focus even when fully wide. A custom-built framing system containing 4 dual axis shutters with

a 120-degree field of rotation, motorized iris, focus, zoom, and frost capabilities, alongside a 5-facet

rotating prism give an abundance of tools for beam shaping. Two rotating glass gobo wheels featuring

gobos created in collaboration with leading designers can be stacked on top of one another for dynamic

effects. Control as desired with DMX, sACN, Art-Net or W-DMX.

Features

• Fully featured, compact and lightweight 580 W LED yoke profile fixture including CMY + CTO color

mixing, a 4-blade framing shutter system with rotation, a color wheel, 8:1 zoom, a 5-facet prism

wheel, and 2 rotating gobo wheels

• 16-bit dimming of master dimmer for smooth control of fades

• Variable CMY + CTO color mixing system to create a wide pallet of colors

• CRI and CTB filters on color wheel for added flexibility

• Two rotating, indexing and interchangeable slot and lock gobo wheels

• DMX, WDMX, sACN, and Art-Net for full flexibility of control options

• RDM control over DMX for fixture reporting

• 6.8° to 55.9° zoom range for variable beam sizes

• Iris, 5-facet prism and frost for beam control

• True 1 compatible power input

• Three setup menu presets and preset sync for cross loading to multiple like fixtures for easy shop

setup

• USB slot for software uploads

• Battery backup display with auto-rotate depending on fixture orientation

Product Overview

buttons

LCD

display

DMX

in/out

Power

switch

Carry

handle

Power

Fuse

holder

Ethernet

ports

WDMX

antenna

USB A

port

Introduction

Maverick Force 2 Profile User Manual Rev. 4

Product Dimensions

26.38 in

670 mm

11.22 in

285 mm

15.11 in

384 mm

21.72 in

552 mm

17.79 in

452 mm

15.51 in

394 mm

10.71 in

272 mm

10.0 in

254 mm

4.51 in

114 mm

13.9 in

353 mm

Maverick Force 2 Profile User Manual Rev. 4

Setup

3. Setup

AC Power

The Maverick Force 2 Profile has an auto-ranging power supply and it can work with an input voltage

range of 100 to 240 VAC, 50/60 Hz.

To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current

value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.

The listed current rating indicates the product’s average current draw under normal conditions.

AC Plug

The Maverick Force 2 Profile comes with a power input cord terminated with a Seetronic Powerkon A

connector on one end and an Edison plug on the other end (U.S. market). If the power input cord that

came with the product has no plug, or if it is necessary to change the plug, use the table below to wire the

new plug.

Fuse Replacement

1. Disconnect this product from the power outlet.

2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.

3. Remove the blown fuse and replace with another fuse of the same type and rating (F 20 A, 250 V).

4. Screw the fuse holder cap back in place and reconnect power.

Remote Device Management (RDM)

Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate

bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the

manufacturer as not all DMX controllers have this capability. The Maverick Force 2 Profile supports RDM

protocol that allows feedback to make changes to menu map options.

USB Software Update

The Maverick Force 2 Profile allows for software update through USB using the built-in USB port. To

update the software using the USB flash drive, do the following:

1. Power on the fixture and plug the flash drive into the USB port.

2. Once the flash drive has been detected, the message “Upgrade Firmware” will be displayed.

Press <ENTER>. If a different message appears on the display, search for the updated software in

the Menu (Updated Firmware). A list of the updated software files will be displayed.

3. Select the file that needs to be uploaded. The message “Are you sure?” will be displayed. Press

<ENTER>.

4. If the selected file is correct, the update will be completed. Restart the product.

If the selected file is incorrect, the update will fail, and the display will go back to the main interface.

Repeat steps 1–3 using the correct file.

• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure

the product has an appropriate electrical ground to avoid the risk of electrocution or

fire.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the

rheostat or dimmer channel serves only as a 0 to 100% switch.

Connection Wire (U.S.) Wire (Europe) Screw Color

AC Live Black Brown Yellow or Brass

AC Neutral White Blue Silver

AC Ground Green/Yellow Green/Yellow Green

The .chl format file needs to be placed in the MAVERICK folder in the USB flash drive.

Setup

Maverick Force 2 Profile User Manual Rev. 4

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.

For the Chauvet Professional line of mounting clamps, go to http://trusst.com/products/.

Orientation

Always mount this product in a safe position, making sure there is adequate room for ventilation,

configuration, and maintenance.

Rigging

Chauvet recommends using the following general guidelines when mounting this product.

• Before deciding on a location for the product, make sure there is easy access to the product for

maintenance and programming purposes.

• Make sure that the structure and attachment points can support the weight before hanging the

product. See the Technical Specifications for weight information.

• When mounting the product overhead, always use a safety cable. Mount the product securely to a

rigging point, whether an elevated platform or a truss.

• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.

Procedure

The Maverick Force 2 Profile comes with 2 omega brackets to which the user can directly attach mounting

clamps (sold separately). Make sure the clamps are capable of supporting the weight of this product. Use

at least two mounting points per product. For the Chauvet Professional line of mounting clamps, go to http:/

/www.trusst.com/products.

Mounting Diagram

Safety Cable

Mounting Clamp (x2)

Omega Bracket (x2)

Andere Handbücher für Maverick Force 2 Profile

Inhaltsverzeichnis

Andere Chauvet Professional Beleuchtungsausrüstung Handbücher

Chauvet Professional

Chauvet Professional STRIKE ARRAY 4 Bedienungsanleitung

Chauvet Professional

Chauvet Professional WELL STX 360 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick Storm 2 BeamWash Bedienungsanleitung

Chauvet Professional

Chauvet Professional STRIKEARRAY2 Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUER1ESPOT Gebrauchsanweisung

Chauvet Professional

Chauvet Professional Well Panel Bedienungsanleitung

Chauvet Professional

Chauvet Professional REM-RB100CMIP Bedienungsanleitung

Chauvet Professional

Chauvet Professional onAir IP Panel 2 Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLOR Strike M Bedienungsanleitung

Chauvet Professional

Chauvet Professional Nexus 2x2 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation E-190WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick Silens 2 Profile Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-145WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional WELLPANEL Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION REVE E-3 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation FD-205WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION MIN-E-10WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional Vesuvio RGBA Bedienungsanleitung

Chauvet Professional

Chauvet Professional STRIKE 4 Bedienungsanleitung

Chauvet Professional

Chauvet Professional 91LEDs Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORSTRIKEM Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-H7XIP Bedienungsanleitung

Chauvet Professional

Chauvet Professional STRIKEARRAY2 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-265WW Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung