Chauvet Professional Rogue R3 Beam Bedienungsanleitung

Quick Reference Guide

English EN

Español ES

Français FR

Deutsch DE

Nederlands NL

QUICK REFERENCE GUIDE

Rogue R3 Beam QRG Rev. 3

About This Guide

The Rogue R3 Beam Quick Reference Guide (QRG) has basic product information such as connection, mounting, menu

options, and DMX values. Download the User Manual from www.chauvetprofessional.com for more details.

Disclaimer

The information and specifications contained in this QRG are subject to change without notice.

LIMITED WARRANTY

FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.

For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.

For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and

Germany: www.chauvetlighting.eu/warranty-registration.

Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the

period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This

warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this

warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows

the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This

warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to

country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,

Luxembourg, France, Germany, and Mexico. For warranty terms in other countries, please consult your local distributor.

Safety Notes

These Safety Notes include important information about installation, use, and maintenance.

• DO NOT open this product. It contains no user-serviceable parts.

• DO NOT look at the light source when the product is on.

• DO NOT leave any flammable material within 8 in (20 cm) of this product while operating or connected to power.

• DO NOT operate this product if the housing, lenses, or cables appear damaged.

• DO NOT connect this product to a dimmer or rheostat.

• DO NOT operate this product outdoors or in any location where dust, excessive heat, water, or humidity may affect

it (IP20).

• CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm humid

ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow

product to fully acclimate to the surrounding environment before connecting it to power.

• CAUTION: This product’s housing may be hot when lights are operating.

• USE a safety cable when mounting this product overhead.

• ONLY connect this product to a grounded and protected circuit.

• ONLY use the hanging/mounting bracket or the handles to carry this product. Do not carry by the moving head.

• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the

product from power via breaker or by unplugging it.

• In the event of a serious operating problem, stop using immediately.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.

• The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 26.2 ft

(8 m) is not expected.

• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced with a special cable or cord

exclusively available from the manufacturer or its service agent.

• The light source contained in this luminaire shall only be replaced by the manufacturer, its service agent, or a

similarly qualified person.

• The luminaire is intended for professional use only.

FCC Compliance

This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

Contact

Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or

return a product. Refer to Contact Us at the end of this QRG for contact information.

Rogue R3 Beam QRG Rev. 3

QUICK REFERENCE GUIDE

What is Included

AC Power

This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.

Power Linking

It is possible to link up to 3 Rogue R3 Beam products at 120 V, 6 products at 208 V, or 7 products at 230 V. Never exceed

this number. Power-linking cords can be purchased separately from Chauvet.

AC Plug

Replacing the Fuse

1. Disconnect the product from power.

2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.

3. Remove blown fuse and replace with a good fuse of the same type and rating.

4. Screw the fuse holder cap back in place and reconnect power.

DMX Linking

The Rogue R3 Beam will work with a DMX controller using a 3- or 5-pin DMX serial connection. A DMX Primer is

available at www.chauvetprofessional.com.

DMX Connection

The Rogue R3 Beam uses a 3- or 5-pin DMX data connection for its DMX personalities: 16CH and 19CH. See the User

Manual for information about connecting and configuring the product for DMX operation.

RDM (Remote Device Management)

Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally

along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer, as not all DMX controllers

have this capability. The Rogue R3 Beam supports RDM protocol that allows feedback to make changes to menu map

options. Download the User Manual from www.chauvetprofessional.com for more details.

• Rogue R3 Beam

•Neutrik

®powerCON®power cord • 2 Omega brackets with mounting hardware

• Quick Reference Guide

Connection Wire (U.S.) Wire (Europe) Screw Color

AC Live Black Brown Yellow/Brass

AC Neutral White Blue Silver

AC Ground Green/Yellow Green/Yellow Green

To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely

disconnect the product from power via breaker or by unplugging it.

QUICK REFERENCE GUIDE

Rogue R3 Beam QRG Rev. 3

Mounting

Before mounting this product, read the Safety Notes. Use at least one mounting point per product. Make sure the

mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to

http://trusst.com/productcategory/truss-clamps/.

Mounting Diagram

Control Panel Description

Button Function

<MENU> Exits from the current menu or function

<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function

<UP> Navigates upwards through the menu list and increases the numeric value when in a function

<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function

Safety cable

Mounting clamps (2x)

Overhead Mounting Floor Mounting

Mounting

brackets

(2x)

Rogue R3 Beam QRG Rev. 3

QUICK REFERENCE GUIDE

Menu Map

Refer for the Rogue R3 Beam product page on www.chauvetprofessional.com for the latest menu map.

Main Level Programming Levels Description

Address 001–512 Sets the starting address

Run Mode

DMX 16CH Selects the DMX personality

19CH

Auto Test Auto test all functions

Manual Test

Pan

000–255 Manually control and test all settings through the

control panel

Pan Fine

Tilt

Tilt Fine

P/T Speed

Dimmer

Dimmer Fine

Shutter

Color

Gobo

Prism1

Prism1 Rot

Prism2

Prism2 Rot

Focus

Frost

P/T Macro

P/T Ma. Speed

Special Function

Setup

Pan Reverse NO Normal pan

YES Reversed pan

Tilt Reverse NO Normal tilt

YES Reversed tilt

Screen Reverse NO Normal screen display

YES Inverted screen display

Pan Angle

540 540° pan range

360 360° pan range

180 180° pan range

Tilt Angle

270 270° tilt range

180 180° tilt range

90 90° tilt range

BL. O. P/T Move YES Blackout while panning/tilting

NO Do not blackout while panning/tilting

BL. O. Color Move YES Blackout while color wheel is moving

NO Do not blackout while color wheel is moving

BL. O. Gobo Move YES Blackout while gobo wheels are moving

NO Do not blackout while gobo wheels are moving

QUICK REFERENCE GUIDE

Rogue R3 Beam QRG Rev. 3

Setup

(cont.)

Lamp Settings

On/Off ON Turns lamp on/off

OFF

State/

Power On

ON Defines the status of lamp when powering up

product

OFF

Off via DMX YES Turns off the unit via DMX controller

On if DMX

YES

Turns lamp on when DMX signal is detected

Off if DMX

Off

YES Turns lamp off when DMX signal is lost

Ignition

Delay 000–255

Selects duration of delay between product power on

and lamp power on

Low Power

Delay 000–255 Selects the duration of delay when shutter is

closed and lamp enters lower power state

Reset

Lamp Time

YES Resets lamp timer to 0

Leaves lamp time unchanged

Maintenance Timer

Interval 000–250

Defines amount of hours between maintenance

Remaining

Time

NO Shows amount of time remaining in maintenance

cycle

RESET Resets the time back to the beginning

Reset Function

Pan/Tilt

YES/NO Reset individual functions or all functions from

start-up

Shutter/

Prism

Color

Gobo

Frost/

Focus

All

Factory Settings YES Reset to factory default settings

Sys Info System

Information

Ver V_ Shows firmware version

Running Mode _ _ _ Shows current running mode

DMX Address _ _ _ Shows current DMX address

Temperature _ _ _

Displays the product’s temperature in

°C

Lamp On Time _ _ _ _

Displays the amount of time the lamp has been on

(provided the counter has been reset upon

installation of new lamp)

Remain Time _ _ _ _ _ Shows amount of time remaining in maintenance

cycle

UID _ _ _ _ _ Shows product UID

Fan1 Speed _ _ _ _ _ Shows speed of Fan 1

Fan2 Speed _ _ _ _ _ Shows speed of Fan 2

Main Level Programming Levels Description

Rogue R3 Beam QRG Rev. 3

QUICK REFERENCE GUIDE

DMX Values

19CH

Channel Function Value Percent/Setting

1Pan 000 255 0–100%

2Panfine 000 255 Fine control (16-bit)

3Tilt 000 255 0–100%

4Tiltfine 000 255 Fine control (16-bit)

5 Pan/tilt speed 000 255 Fast to slow

6 Dimmer 000 255 0–100%

7 Dimmer fine 000 255 Fine control (16-bit)

8Strobe

000 007 Closed

008 015 Open

016 131 Synchronized strobe, slow to fast

132 167 Fast close, slow open (slow to fast)

168 203 Slow close, fast open (slow to fast)

204 239 Pulse strobe, slow to fast

240 247 Random strobe, slow to fast

248 255 Open

9Colorwheel

000 004 Open

005 008 Red

009 012 Orange

013 016 Cyan

017 020 Light green

021 024 Light yellow

025 028 Lavender

029 032 Pink

033 036 Yellow

037 040 Magenta

041 044 Light blue

045 048 Amber

049 052 CTO 5600K

053 056 CTO 6500K

057 060 UV

061 127 Split colors

128 189 Clockwise color scroll, fast to slow

190 193 Stop

194 255 Counterclockwise color scroll, slow to fast

QUICK REFERENCE GUIDE

Rogue R3 Beam QRG Rev. 3

10 Static gobo wheel

000 003 Open

004 006 Gobo 1

007 009 Gobo 2

010 012 Gobo 3

013 015 Gobo 4

016 018 Gobo 5

019 021 Gobo 6

022 024 Gobo 7

025 027 Gobo 8

028 030 Gobo 9

031 033 Gobo 10

034 036 Gobo 11

037 039 Gobo 12

040 042 Gobo 13

043 045 Gobo 14

046 048 Gobo 15

049 051 Gobo 16

052 055 Gobo 17

056 059 Open

060 063 Gobo 1 shaking, slow to fast

064 067 Gobo 2 shaking, slow to fast

068 071 Gobo 3 shaking, slow to fast

072 075 Gobo 4 shaking, slow to fast

076 079 Gobo 5 shaking, slow to fast

080 083 Gobo 6 shaking, slow to fast

084 087 Gobo 7 shaking, slow to fast

088 091 Gobo 8 shaking, slow to fast

092 095 Gobo 9 shaking, slow to fast

096 099 Gobo 10 shaking, slow to fast

100 103 Gobo 11 shaking, slow to fast

104 107 Gobo 12 shaking, slow to fast

108 111 Gobo 13 shaking, slow to fast

112 115 Gobo 14 shaking, slow to fast

116 119 Gobo 15 shaking, slow to fast

120 123 Gobo 16 shaking, slow to fast

124 127 Gobo 17 shaking, slow to fast

128 189 Clockwise gobo scroll, fast to slow

190 193 Stop

194 255 Counterclockwise gobo scroll, slow to fast

11 Prism 1 000 004 No function

005 255 Prism index

12 Prism 1 rotation

000 127 Prism index

128 189 Clockwise rotation, fast to slow

190 193 Stop

194 255 Counterclockwise rotation, slow to fast

13 Prism 2 000 004 No function

005 255 Prism index

14 Prism 2 rotation

000 127 Prism index

128 189 Clockwise rotation, fast to slow

190 193 Stop

194 255 Counterclockwise rotation, slow to fast

15 Focus 000 255 0–100%

16 Frost 000 255 0–100%

Channel Function Value Percent/Setting

Rogue R3 Beam QRG Rev. 3

QUICK REFERENCE GUIDE

17 Movement macros

000 007 No function

008 015 Effect 1

016 023 Effect 2

024 031 Effect 3

032 039 Effect 4

040 047 Effect 5

048 055 Effect 6

056 063 Effect 7

064 071 Effect 8

072 079 Effect 9

080 087 Effect 10

088 095 Effect 11

096 103 Effect 12

104 111 Effect 13

112 119 Effect 14

120 127 Effect 15

128 135 Effect 16

136 143 Effect 17

144 151 Effect 18

152 159 Effect 19

160 167 Effect 20

168 175 Effect 21

176 183 Effect 22

184 191 Effect 23

192 199 Effect 24

200 207 Effect 25

208 215 Effect 26

216 223 Effect 27

224 231 Effect 28

232 239 Effect 29

240 247 Effect 30

248 255 Effect 31

18 Movement macro speed 000 255 0–100%

19 Control

000 069 No function

070 079 Enable pan/tilt blackout

080 089 Disable pan/tilt blackout

090 099 Enable blackout while color wheel is moving

100 109 Disable color wheel blackout

110 119 Enable blackout while gobo wheels are moving

120 129 Disable gobo wheel blackout

130 139 Lamp on

140 149 Pan/tilt reset

150 159 Color wheel reset

160 169 Gobo wheel reset

170 179 Shutter/prism reset

180 189 No function

190 199 Focus reset

200 209 All reset

210 219 Enable blackout all function during pan/tilt

220 229 Disable blackout all function during pan/tilt

230 239 Lamp off

240 255 No function

Channel Function Value Percent/Setting

QUICK REFERENCE GUIDE

Rogue R3 Beam QRG Rev. 3

16CH

Channel Function Value Percent/Setting

1Pan 000 255 0–100%

2Panfine 000 255 Fine control (16-bit)

3Tilt 000 255 0–100%

4Tiltfine 000 255 Fine control (16-bit)

5 Pan/tilt speed 000 255 Fast to slow

6 Dimmer 000 255 0–100%

7Strobe

000 007 Closed

008 015 Open

016 131 Synchronized strobe, slow to fast

132 167 Fast close, slow open (slow to fast)

168 203 Slow close, fast open (slow to fast)

204 239 Pulse strobe, slow to fast

240 247 Random strobe, slow to fast

248 255 Open

8 Color wheel

000 004 Open

005 008 Red

009 012 Orange

013 016 Cyan

017 020 Light green

021 024 Light yellow

025 028 Lavender

029 032 Pink

033 036 Yellow

037 040 Magenta

041 044 Light blue

045 048 Amber

049 052 CTO 5600K

053 056 CTO 6500K

057 060 UV

061 127 Split colors

128 189 Clockwise color scroll, fast to slow

190 193 Stop

194 255 Counterclockwise color scroll, slow to fast

Inhaltsverzeichnis

Sprachen:

Andere Chauvet Professional Beleuchtungsausrüstung Handbücher

Chauvet Professional

Chauvet Professional Ovation H-55WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-55WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATIONH55WWBLK Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-265WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLOR Strike M Bedienungsanleitung

Chauvet Professional

Chauvet Professional REMRB50CMIPCURVE Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-H18X Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation E-190WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick Storm 2 BeamWash Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation FD-205WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION MIN-E-10WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORSTRIKEM Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado 2 Zoom Tour Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado 1QS Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLOR Strike M Bedienungsanleitung

Chauvet Professional

Chauvet Professional Well Panel Bedienungsanleitung

Chauvet Professional

Chauvet Professional Colorado 1 Quad Bedienungsanleitung

Chauvet Professional

Chauvet Professional Rogue Outcast 1 BeamWash Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick Silens 2 Profile Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION-F-915-VW Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick Storm 2 BeamWash Bedienungsanleitung

Chauvet Professional

Chauvet Professional REM-RB100CM IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION P-56VW Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUEOUTCAST2HYBRID Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung