Chauvet Nexus Aw 7x7 Bedienerhandbuch

Quick Reference Guide

English EN

Español ES

Français FR

Nederlands NL

Nexus™ Aw 7x7 QRG EN

About this

Guide

The Nexus™ Aw 7x7 Quick Reference Guide (QRG) has basic product

information such as connection, mounting, menu options, and DMX values.

Download the User Manual from www.chauvetprofessional.com

for more

details.

Disclaimer

The information and specifications contained in this QRG are subject to

change without notice.

Safety Notes

•DO NOT open this product. It contains no user-serviceable parts.

•DO NOT look at the light source when the product is on.

•CAUTION: This product’s housing may be hot when lights are

operating.

•Mount this product in a location with adequate ventilation, at least

20 in (50 cm) from adjacent surfaces.

•DO NOT leave any flammable material within 50 cm of this product

while operating or connected to power.

•USE a safety cable when mounting this product overhead.

•DO NOT hang product using only the coffin locks.

•DO NOT operate this product outdoors or in any location where dust,

excessive heat, water, or humidity may affect it. (IP20)

•DO NOT operate this product if the housing, lenses, or cables appear

damaged.

•DO NOT connect this product to a dimmer or rheostat.

•ONLY connect this product to a grounded and protected circuit.

•ONLY use the hanging/mounting bracket to carry this product.

•In the event of a serious operating problem, stop using immediately.

•The maximum ambient temperature is 104 °F (40 °C). Do not operate

this product at higher temperatures.

•

To eliminate unnecessary wear and improve its lifespan, during periods

of non-use

completely disconnect the product from power via breaker or

by unplugging it.

•CAUTION: When transferring product from extreme temperature

environments, (e.g. cold truck to warm humid ballroom) condensation

may form on the internal electronics of the product. To avoid causing a

failure, allow product to fully acclimate to the surrounding

Contact

Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact

your distributor to request support or return a product. Visit

www.chauvetprofessional.com for contact information.

What is

Included

•Nexus™ Aw 7x7

•Neutrik® powerCON® power

cord

•#8 Allen key with handle

•Warranty Card

•

Quick Reference Guide

Nexus™ Aw 7x7 QRG EN

AC Power

This product has an auto-ranging power supply that can work with an input

voltage range of 100 to 240 VAC, 50/60 Hz.

To eliminate wear and improve its lifespan, during periods of non-use

completely disconnect from power via breaker or by unplugging it.

Power Linking

The Nexus™ Aw 7x7 supports power linking in the quantities listed below.

Do not link more than

•7 products at 120 V,

•12 products at 208 V, or

•13 products at 230 V.

Power linking cords can be purchased separately.

Power Linking

Diagram

AC Plug

Connection

Wire (U.S.)

Wire (Europe)

Screw Color

AC Live

Black

Brown

Yellow/Brass

AC Neutral

White

Blue

Silver

AC Ground

Green/Yellow

Green

Replacing the

Fuse

1. Disconnect this product from power.

2. Using a flat-head screwdriver, unscrew the fuse holder cap from the

housing.

3. Remove blown fuse and replace with a good fuse of the same type and

rating.

4. Screw the fuse holder cap back in place.

5. Reconnect power.

Nexus™ Aw 7x7 QRG EN

DMX Linking

The Nexus™ Aw 7x7 works in Master/Slave mode or with a DMX

controller using its DMX ports

. A DMX Primer is available from

www.chauvetprofessional.com.

DMX Linking

Diagram

DMX

Personalities

The Nexus™ Aw 7x7 has 5 DMX personalities: 5, 8, 49, 54, and 57

channels. For more information, see the DMX Values

this QRG, or the User Manual on the Chauvet

website at

http://www.chauvetlighting.com/product-manuals-literature/.

Master/Slave

Mode

Nexus™ Aw 7x7 works in Master/Slave mode. For more

information, see the User Manual on the Chauvet website.

Ethernet

Connections

Ethernet connections link Nexus™ Aw 7x7 panels to routers and each

other through their Neutrik®

etherCON® ports. Ethernet connections are

for running TCP/IP-protocol-based control system, such as Kling-

Net and

Art-Net®. All Neutrik®

etherCON® ports can be either input or output,

and panels can be linked to each other, but the start of each chain of panels

must be a router port.

DMX Controller or Master

Other

DMX Products

Nexus™ Aw 7x7 QRG EN

Ethernet

Connections

Diagram

Kling-Net Mode

Kling-Net is a network protocol that uses TCP/IP to send DMX over

a network and into the Neutrik® etherCON® connection ports of

the Nexus™ Aw 7x7 panels. Kling-

Net works seamlessly with

Kling-Net-supported ArKaos software fo

r configuring and mapping display

devices. For more information, see the User Manual on the Chauvet

website at http://www.chauvetlighting.com/product-manuals-literature/.

Art-Net™ Mode

Art-Net™ is an Ethernet protocol that uses TCP/IP to send DMX

signals over a network and into the Neutrik®

etherCON® connection

ports of the Nexus™ Aw 7x7 panels. Art-

Net™ requires configuration

through the control panel. For more information, see the Menu Map

this QRG or the User Manual on the Chauvet website.

An Art-Net™ Primer is available from www.chauvetprofessional.com. Art-

Net™ is designed and copyrighted by Artistic Licence Holdings Ltd.

Nexus™ Aw 7x7 panels do not work with Art-

Net™ controllers

sending in Broadcast mode. For information about the controller’s

mode, see the controller’s User Manual.

Reset To

Factory

Defaults

1. Disconnect the Nexus™ Aw 7x7 from power.

2. Press and hold <MENU/ESC> and <ENTER> simultaneously.

3. Reconnect the Nexus™ Aw 7x7 to power.

4. Release <MENU/ESC> and <ENTER>. The words Factory reset?

ENTER = Confirm show on the display.

5. Press <ENTER>.

NOTE: Do not use the router WAN port!

Router

Computer or

Controller Running

TCP/IP based

protocol, such as

Kling-Net or Art-Net™

Nexus™ Aw 7x7

Panels

Additional

Nexus™ 7x7

Panels

Nexus™ Aw 7x7 QRG EN

Kling-Net

Mapper

Kling-Net Mapper is part of the ArKaos software package. It informs

ArKaos software about the layout of the Nexus™ Aw 7x7

products in a

process called mapping.

The following section provides step-by-

step instructions for mapping the

Nexus™ Aw 7x7 products.

Part 1: Confirm

Network

Connectivity

1. Connect the Arkaos computer and Nexus™ Aw 7x7s to the same

network. For more information, see Ethernet Connections Diagram.

2. Set the all the Nexus™ Aw 7x7s to Kling-Net operating mode.

3. Open the ArKaos Kling-Net Mapper. All the Kling-Net™ devices

populate a list on the left side of the screen in the Connected Devices

window.

The Connected

Devices Window

It can take up to 20 seconds for all the products to populate the list and the

color of the device’s listing provides information about its status.

Colors and Activity

Explanation

Black with an ID number and IP

address

There is connectivity and everything is working

properly, but the device is not yet mapped.

Green with an ID number and IP

address

There is connectivity and everything is working

properly, and the device is mapped.

Black to red with no IP address during

initial population

The King-Net™ Mapper could not find an IP

address for the device, most likely because the

system is using an Ethernet switch instead of

an Ethernet hub.

Black to red after initial population The connectivity has been lost.

Part 2: Test

Network

Connectivity

Select the Output dropdown icon from the tool bar at the top of the

Kling-Net Mapper screen. One of the options will be Test Pattern.

Select Test Pattern. The image to the right of the icon is a small

screen, indicating that Test Pattern is the current mode.

3. Select the icon to the right of the Output dropdown icon. One of

the

options will be Flashing Output Selection.

Select Flashing Output Selection. The icon is a faded green square

with an arrow, indicating that a flashing green light is the current test

pattern.

5. Left click once on an LED display product. The product flashes green.

6. Repeat step 4 for every product in the list.

Nexus™ Aw 7x7 QRG EN

Part 3: Map The

Products For

ArKaos

1. Make sure the Nexus™ Aw 7x7

products are all listed in the

Connected Devices window and have flashed when tested. For more

information, see Part1: Confirming Connectivity.

Click on the first product in the list and drag it onto the mapping

image in the center of the screen. A shape representing the display

product shows on the mapping image. The product displays the pattern

on the mapping image.

3. Drag, rotate, and resize the

shape on the mapping image until it is in

the position needed for the presentation layout.

4. Repeat steps 2 thru 3 for every Nexus™ Aw 7x7 product.

5. Complete Parts 1 and 2.

6. Click on File in the Arkaos Kling-Net Mapper.

7. Click on Save As.

8. Save the file.

Remember the location of the file because the file must be loaded into

ArKaos software.

Mounting

Nexus™ Aw 7x7 panels are rigged using the CHAUVET® Affinity™ Rig

Kit, or the CHAUVET® CLP-

15 clamp, both of which are sold separately.

The Rig Kit can bear the weight of 16 panels, in 1 column of 16, or 2

columns of 8. The rig kit has 3 holes for M12 compatible bolts a

nd works

with most standard truss clamps. The mounting clamp can bear the weight

of 4 panels hung in a single column. The mounting clamp has one hole for

M12 compatible bolts and fits most standard truss.

The coffin locks on the top and bottom of the Nexus™ Aw 7x7

panels

connect the tops and bottoms, and bear the weight, of the panels. The bolt-

locking connectors on the sides connect the panels and align the pixels into

rows. They cannot bear the weight of the panels.

•When using only the integrated bracket, do not link more than 4

panels in one column.

•The bolt-locking hardware on the sides of the Nexus™ Aw 7x7

panels is not load bearing. Do not hang the panels sideways.

Mounting

Diagram with

Affinity™ Rig Kit

Rig Kit Attached

To 2 Panels

Rig Kit Attached

To 1 Panel

Coffin Locks

Bolt-Locking

Connectors

Up to 16 Panels

in a Single

Column

Nexus™ Aw 7x7 QRG EN

Mounting

Diagram

With

CLP-15 Clamp

Horizontal Panel

Connection

Control Panel

Description

Button

Function

Scrolls through the main menu options or exits the current menu

option

<ENTER> Enters into the highlighted menu option or sets the currently

selected value

<UP> Navigates up through a list of menu options or values

<DOWN> Navigates down through a list of menu options or values

#8 Allen Key

With Handle

Position The Bracket To The

Top Of The Panel

Up To 4 Panels

In A Single

Column

Mounting Clamp

Into Bracket

Bottom Of

Panel

Top Of

Panel

Nexus™ Aw 7x7 QRG EN

Menu Map

Main Level

Programming Levels

Description

Auto Show Auto 0–8

Show Speed

000–100

Selects an auto program and its speed

Static

Dimmer

000–255

Sets intensity 0–100%

Strobe

Selects the strobe rate (slow to fast)

Dimmer Mode Off

Dimmer 1–3

Sets dimming curve

Back Lite

Sets control panel backlight on time

10S

20S

30S

Information

Auto Test

Starts a self-test

Fixture Hours

Shows total operating hours

Version

Shows software version

IP Address

Shows IP address

Device ID

Shows ID number

DMX Address 001–512

Sets product’s DMX Address/Art-Net™ start

channel

DMX Channel

5Ch

Sets DMX personality for DMX, Art-Net™

mode, and Kling-Net modes.

8Ch

49Ch

54Ch

57Ch

Master/Slave

Master

Sets Master mode

Slave

Sets Slave mode

Temperature

Shows product’s internal temperature

Ethernet Settings Protocol

Kling-Net

Sets Kling-Net protocol

Art-Net

IP Mode

Static

Sets product to use its internal IP address

DHCP

Sets product to use dynamic IP addressing

Manual

Enter the IP address manually

Net

000–127

Sets the net address of the product

Subnet

00–15

Sets the subnet of the product

Universe

Sets the universe of the product

Start

Channel

001–512 Sets the starting channel of the product

Minimum Dimmer

0–100

Selects the minimum dimmer setting

Nexus™ Aw 7x7 QRG EN

DMX Values

57Ch

Channel Function Value Percent/Setting

White 1

000 ó255

0–100%

White 2

000 ó255

0–100%

White 3

000 ó255

0–100%

White 4

000 ó255

0–100%

White 5

000 ó255

0–100%

White 6

000 ó255

0–100%

White 7

000 ó255

0–100%

White 8

000 ó255

0–100%

White 9

000 ó255

0–100%

White 10

000 ó255

0–100%

White 11

000 ó255

0–100%

White 12

000 ó255

0–100%

White 13

000 ó255

0–100%

White 14

000

255

0–100%

White 15

000 ó255

0–100%

White 16

000 ó255

0–100%

White 17

000 ó255

0–100%

White 18

000 ó255

0–100%

White 19

000 ó255

0–100%

White 20

000 ó255

0–100%

White 21

000 ó255

0–100%

White 22

000 ó255

0–100%

White 23

000 ó255

0–100%

White 24

000 ó255

0–100%

White 25

000

255

0–100%

White 26

000 ó255

0–100%

White 27

000 ó255

0–100%

White 28

000 ó255

0–100%

White 29

000 ó255

0–100%

White 30

000 ó255

0–100%

White 31

000 ó255

0–100%

White 32

000 ó255

0–100%

White 33

000 ó255

0–100%

White 34

000

255

0–100%

White 35

000 ó255

0–100%

White 36

000 ó255

0–100%

White 37

000 ó255

0–100%

White 38

000 ó255

0–100%

White 39

000 ó255

0–100%

White 40

000 ó255

0–100%

White 41

000 ó255

0–100%

White 42

000 ó255

0–100%

White 43

000 ó255

0–100%

White 44

000 ó255

0–100%

White 45

000

255

0–100%

White 46

000 ó255

0–100%

White 47

000 ó255

0–100%

White 48

000 ó255

0–100%

White 49

000 ó255

0–100%

Foreground Dimmer

000 ó255

0–100%

Background

Dimmer

000 ó255 0–100%

Andere Handbücher für Nexus Aw 7x7

Inhaltsverzeichnis

Sprachen:

Andere Chauvet Scheinwerfer Handbücher

Chauvet

Chauvet nexus 4x1 Bedienungsanleitung

Chauvet

Chauvet COLORado 2-Quad Zoom IP Bedienungsanleitung

Chauvet

Chauvet Nexus Aq 5x5 Bedienungsanleitung

Chauvet

Chauvet COLORdash Quad Bedienungsanleitung

Chauvet

Chauvet COLORado 2-Quad Zoom IP Bedienungsanleitung

Chauvet

Chauvet Freedom Par Quad-4 IP Bedienungsanleitung

Chauvet

Chauvet Hurricane 700 Bedienungsanleitung

Chauvet

Chauvet COLORado Batten 72 Tour Bedienungsanleitung

Chauvet

Chauvet LEDRain 56C Bedienungsanleitung

Chauvet

Chauvet Nexus Bedienungsanleitung

Chauvet

Chauvet Core par UV Bedienungsanleitung

Chauvet

Chauvet Hurricane 1300 Bedienungsanleitung

Chauvet

Chauvet COLORPALETTE II DMX512 Bedienungsanleitung

Chauvet

Chauvet COLORdash Par-Hex 7 Bedienungsanleitung

Chauvet

Chauvet Intimidator Beam LED 350 Bedienungsanleitung

Chauvet

Chauvet Nexus 2x2 Bedienerhandbuch

Chauvet

Chauvet COLORado Batten 72 Tour Bedienungsanleitung

Chauvet

Chauvet SlimBANK Bedienungsanleitung

Chauvet

Chauvet Colordash Par-Tri Bedienungsanleitung

Chauvet

Chauvet 4 Bar Flex Bedienungsanleitung

Chauvet

Chauvet Strike 882 Bedienungsanleitung

Chauvet

Chauvet Bubble King Bedienungsanleitung

Chauvet

Chauvet COLORado Batten 72 Tour Bedienungsanleitung

Chauvet

Chauvet Cubix 2.0 Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken

VIZULO

VIZULO Micro Martin Benutzerhandbuch

EuroLite

EuroLite LED IP FL-100 SMD Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock XB12 Bedienungsanleitung

Allen + Roth

Allen + Roth 17624-000 Bedienungsanleitung

ADJ

ADJ 4 STAGE PAK Bedienungsanleitung

Cooper Lighting

Cooper Lighting EGL91SW233 Bedienungsanleitung

Max

Max 37496 Bedienungsanleitung

BEGA

BEGA 85 143 Bedienungsanleitung

Beamz

Beamz 151.226 Bedienungsanleitung

EuroLite

EuroLite LED IP FL-8 Bedienungsanleitung

Ledj

Ledj PERFORMER 36 RGB Bedienungsanleitung

Perel

Perel ELS3 Bedienungsanleitung

Perel

Perel ELS3WD Bedienungsanleitung

LumX

LumX LM 36130 Bedienungsanleitung

Xtricity

Xtricity 4-80053 Bedienungsanleitung

Stahl

Stahl 6521/4 Series Bedienungsanleitung

Ecosense

Ecosense EcoSpec Bedienungsanleitung

Ayrton

Ayrton minipanel FX Bedienungsanleitung