Chauvet Intimidator Beam LED 350 Bedienungsanleitung

Quick Reference Guide

Intimidator™ Spot LED 350 QRG EN

Page 2 of 60

About This

Guide

The Intimidator™ Spot LED 350 Quick Reference Guide (QRG) has basic

product information such as mounting, menu options, and DMX values.

Download the User Manual from www.chauvetlighting.com for more details.

Disclaimer

The information and specifications contained in this QRG are subject to change

without notice.

Safety Notes

These Safety Notes include important safety information about installation, use,

and maintenance.

•This product is not intended for permanent installation.

•ONLY connect this product to a grounded and protected circuit.

•Always disconnect from power before cleaning or replacing the fuse.

•DO NOT look at the light source when the product is on.

•Make sure the power cord is not crimped or damaged.

•Never disconnect this product from power cord by pulling or tugging on

the cord.

•When mounting this product overhead, use a safety cable.

•DO NOT allow flammable materials close to the unit while operating.

•DO NOT touch this product when it is operating because it may be hot.

•The voltage of the outlet to which you are connecting this product must

be within the range stated on the decal or rear panel of the product.

•This product is for indoor use only! (IP20) To prevent risk of fire or

shock, do not expose this product to rain or moisture.

•Always mount this product in a location with adequate ventilation, at

least 20 in (50 cm) from adjacent surfaces.

•Be sure that no ventilation slots on the unit’s housing are blocked.

•Never connect this product to a dimmer or rheostat.

•Replace the fuse with another of the same type and rating.

•ONLY use the hanging/mounting bracket or the handles to carry this

product.

•The maximum ambient temperature is 104° F (40° C). Do not operate

this product at higher temperatures.

•In the event of a serious operating problem, stop using immediately.

•

DO NOT open this product. It contains no user-serviceable parts.

Contact

Outside the U.S., United Kingdom, or Ireland, contact your distributor to request

support or return a product. Visit www.chauvetlighting.com

for contact

information.

What Is

Included

•Intimidator™ Spot LED 350

•Hanging Bracket with Mounting

Hardware

•Power Cord

•Warranty Card

•

Quick Reference Guide

To Begin

Unpack your Intimidator™ Spot LED 350 and make sure you have received all

parts in good condition. If the box or contents appear damaged, notify the carrier

immediately, not CHAUVET®.

EN Intimidator™ Spot LED 350 QRG

Page 3 of 60

Product

Description

The Intimidator™ Spot LED 350 is an LED moving head light that has a

motorized focus for crisp gobo effects. Built-

in effect macros and

move-in-black features minimize programming time and auto programs

generate

easyshows.

Product Overview

AC Power

This product has an auto-ranging power supply that can work with an input

voltage range of 100~240 VAC, 50/60 Hz.

Power Linking

You can link up to 3 Intimidator™ Spot LED 350 units at 120 VAC and 7 units

at 230 VAC. You should never exceed this number.

Fuse

Replacement

1. Disconnect the product from power.

2. Using a flat-head screwdriver, loosen the fuse holder and pull straight out.

3. Remove the blown fuse from the holder and replace with a fuse of the

exact same type and rating.

4. Re-insert the fuse holder and reconnect power.

Front Panel

Back Panel

DMX In

Power In

Fuse Holder

Power Out

DMX Out

Safety Loop

Control Panel and

Button Menu

Intimidator™ Spot LED 350 QRG EN

Page 4 of 60

Mounting

Before mounting this product, read the SafetyNotes.

Product

Mounting

Diagram

Control Panel

Description

Button

Function

Exits from the current menu or function

<UP>

Navigates upwards through the menu list and increases

the numeric value when in a function

<DOWN>

Navigates downwards through the menu list and

decreases the numeric value when in a function

<ENTER>

Enables the currently displayed menu or sets the currently

selected value into the selected function

DMX Linking

The Intimidator™ Spot LED 350 can work with a DMX controller when linked

by DMX serial connections.

Instructions for connecting and configuring this

product for DMX operation are in the User Manual.

If you are not familiar with

DMX, download the DMX Primer from www.chauvetlighting.com.

Starting

Address

To ensure full access to all channels in each DMX mode, the highest

recommended DMX address is 499.

Master/Slave

Connection

The Intimidator™ Spot LED 350 uses the DMX data connection for its

Master/Slave mode. Instructions for connecting and configuring this product for

Master/Slave operation are in the User Manual.

Bracket Attachment (x2)

Rubber Feet(x4)

Safety Loop Attachment Point

EN Intimidator™ Spot LED 350 QRG

Page 5 of 60

Menu Options

Main Level

Programming Levels

Description

DMX Address

001–512

Sets the DMX starting address

Operation Modes

SLAv (Son)

Slave operating mode

NASL (SLoU)

Automatic mode, slow program

NAFA (FASt)

Automatic mode, fast program

NStS (SrUn)

Sound Active Mode

Pan

Normal Pan

PAn

Normal Pan operation

Inverse Pan

r PAn

Inverse Pan operation

Tilt

Normal Tilt

tiL

Normal Tilt operation

Inverse Tilt

r tiL

Inverse Tilt operation

Display

Normal Display

diS

Change the LCD display text position

Inverse Display

r diS

Channel Mode

14-Channel Mode

14CH

Selects the DMX personality

8-Channel Mode

8CH

Manual Pan Range

Pan 540º

PA54

Select Pan angle range

Pan 360º

PA36

Pan 180º

PA18

Manual Tilt Range

Tilt 270º

Ti27

Select Tilt angle range

Tilt 180º

Ti18

Tilt 90º

Ti 9

Reset

rESt

Resets fixture

Load

LoAd

Load factory defaults

DMX Values

14-CH

Channel

Function

Value

Percent/Setting

Pan

000 ó255

0–540°

Fine Pan

000 ó255

Fine control of panning

Tilt

000 ó255

0–270°

Fine Tilt

000 ó255

Fine control of tilting

Speed

000 ó255

Pan/Tilt speed (fast to slow)

6 Color Wheel

000 ó006

White

007 ó013

Yellow

014 ó020

Pink

021 ó027

Green

028 ó034

Red

035 ó041

Light Blue

042 ó048

Kelly Green

049 ó055

Orange

056 ó063

Dark Blue

064 ó070

White + Yellow

071 ó077

Yellow + Pink

078 ó084

Pink + Green

085 ó091

Green + Red

092 ó098

Red + Light Blue

099 ó105

Light Blue + Kelly Green

Intimidator™ Spot LED 350 QRG EN

Page 6 of 60

DMX Values (cont.)

14-CH

(cont.)

Channel

Function

Value

Percent/Setting

6 Color Wheel

106 ó112

Kelly Green + Orange

113 ó119

Orange + Dark Blue

120 ó127

Dark Blue + White

128 ó191

Color cycling rainbow with increasing speed

192 ó255

Reverse color cycling rainbow with increasing

speed

7 Gobo Wheel

064 ó071

Gobo 7 shake, from slow to fast

072 ó079

Gobo 6 shake, from slow to fast

080 ó087

Gobo 5 shake, from slow to fast

088 ó095

Gobo 4 shake, from slow to fast

096 ó103

Gobo 3 shake, from slow to fast

104 ó111

Gobo 2 shake, from slow to fast

112 ó119

Gobo 1 shake, from slow to fast

120 ó127

Open

128 ó191

Cycle effect with increasing speed

192 ó255

Reverse cycle effect with increasing speed

8 Gobo Rotation

000 ó063

Indexing

064 ó147

Rotation effect with increasing speed

148 ó231

Reverse rotation effect with increasing speed

232 ó255

Gobo bounce

9 Prism

000 ó007

Open

008 ó012

Prism on

013 ó130

Prism rotation with increasing speed

131 ó247

Reverse prism rotation with increasing speed

248 ó255

Prism effect

Focus

000 ó255

Motor focus, zoom out to zoom in

Dimmer

000 ó255

0–100%

12 Shutter

000 ó003

Closed

004 ó007

Open

008 ó076

Strobe effect with increasing speed

077 ó145

Pulse strobe

146 ó215

Random Shutter

216 ó255

Open

EN Intimidator™ Spot LED 350 QRG

Page 7 of 60

DMX Values (cont.)

14-CH

(cont.)

Channel

Function

Value

Percent/Setting

13 Control Functions

000 ó007

No function

008 ó015

Blackout while pan/tilt moving

016 ó023

Blackout while moving color wheel

024 ó031

Blackout while moving gobo wheel

032 ó039

Disable blackout while pan/tilt/moving color

wheel

040 ó047

Disable blackout while pan/tilt/moving gobo

wheel

048 ó055

Disable blackout while moving all options

056 ó095

No function

096 ó103

Reset pan

104 ó111

Reset tilt

112 ó119

Reset color wheel

120 ó127

Reset gobo wheel

128 ó135

Reset gobo rotation

136 ó143

Reset prism

144 ó151

Reset focus

152 ó159

Reset all channels

160 ó255

No function

14 Movement Macros

000 ó007

No function

008 ó135

Automatic movements 1–8

136 ó255

Sound-Active movements 1–8

8-CH

Channel

Function

Value

Percent/Setting

Pan

000 ó255

0–540°

Tilt

000 ó255

0–270°

3 Color Wheel

000 ó006

White

007 ó013

Yellow

014 ó020

Pink

021 ó027

Green

028 ó034

Red

035 ó041

Light Blue

042 ó048

Kelly Green

049 ó055

Orange

056 ó063

Dark Blue

064 ó070

White + Yellow

071 ó077

Yellow + Pink

078 ó084

Pink + Green

085 ó091

Green + Red

092 ó098

Red + Light Blue

099 ó105

Light Blue + Kelly Green

Intimidator™ Spot LED 350 QRG EN

Page 8 of 60

DMX Values (cont.)

8-CH

(cont.)

Channel

Function

Value

Percent/Setting

3 Color Wheel

106 ó112

Kelly Green + Orange

113 ó119

Orange + Dark Blue

120 ó127

Dark Blue + White

128 ó191

Color cycling rainbow with increasing speed

192 ó255

Reverse color cycling rainbow with increasing

speed

4 Gobo Wheel

064 ó071

Gobo 7 shake, from slow to fast

072 ó079

Gobo 6 shake, from slow to fast

080 ó087

Gobo 5 shake, from slow to fast

088 ó095

Gobo 4 shake, from slow to fast

096 ó103

Gobo 3 shake, from slow to fast

104 ó111

Gobo 2 shake, from slow to fast

112 ó119

Gobo 1 shake, from slow to fast

120 ó127

Open

128 ó191

Cycle effect with increasing speed

192 ó255

Reverse cycle effect with increasing speed

5 Gobo Rotation

000 ó063

Indexing

064 ó147

Rotation effect with increasing speed

148 ó231

Reverse rotation effect with increasing speed

232 ó255

Gobo bounce

6 Prism

000 ó007

Open

008 ó012

Prism on

013 ó130

Prism rotation with increasing speed

131 ó247

Reverse prism rotation with increasing speed

248 ó255

Prism effect

Focus

000 ó255

Motor focus, zoom out to zoom in

8 Shutter

000 ó003

Closed

004 ó007

Open

008 ó076

Strobe effect with increasing speed

077 ó145

Pulse strobe

146 ó215

Random Shutter

216 ó255

Open

ES Intimidator™ Spot LED 350 GRR

Page 9 of 60

Acerca de Esta

Guía

La Guía de Referencia Rápida (GRR) del Intimidator™ Spot LED 350 contiene

información básica sobre el producto, como montaje, opciones de menú y

valores DMX. Descargue el manual de usuario de www.chauvetlighting.com

para una información más detallada.

Exención de

Responsabilidad

La información y especificaciones contenidas en esta GRR están sujetas a

cambio sin previo aviso.

Notas de

Seguridad

Estas notas de seguridad incluyen información de seguridad importante sobre el

montaje, uso ymantenimiento.

•Este producto no está cocebido para una instalación permanente.

•Conecte este producto SOLO a un circuito con toma de tierra y

protegido.

•

Desconecte siempre de la alimentación antes de la limpieza o sustitución

del fusible.

•NO mire a la fuente de luz cuando el producto esté encendido.

•Asegúrese de que el cable de alimentación no está retorcido ni

estropeado.

•Nunca desconecte este producto del cable de alimentación agarrando o

tirando del cable.

•Cuando monte este producto en alto, use un cable de seguridad.

•NO permita la presencia de materiales inflamables cerca de la unidad

cuando esté en funcionamiento.

•NO toque este producto cuando esté en funcionamiento, pues podría

estar caliente.

•La tensión del enchufe al que conecte este producto ha de estar en el

rango establecido en el grabado o en el panel posterior de producto.

•¡Este producto es para uso en interiores solamente! (IP20) Para evitar

riesgos de incendio o descarga, no exponga este producto a la lluvia o la

humedad.

•Monte siempre este producto en una ubicación con ventilación

adecuada, al menos a 20'' (50 cm) de superficies adyacentes.

•Asegúrese de que ninguna ranura de ventilación en la carcasa de la

unidad queda bloqueada.

•Nunca conecte este producto a un atenuador o reostato.

•Sustituya el fusible con uno del mismo tipo y categoría.

•Use SOLAMENTE los soportes de colgar/montar o las asas para mover

este producto.

•La máxima temperatura ambiente es de 104º F (40º C). No haga

funcionar este producto a temperaturas más altas.

•En caso de un problema grave de funcionamiento, deje de usarlo

inmediatamente.

•NO abra este producto. No contiene piezas reparables por el usuario.

Intimidator™ Spot LED 350 GRR ES

Page 10 of 60

Contacto

Fuera de EE.UU, Reino Unido o Irlanda, póngase en contacto con su

distribuidor para solicitar asistencia o devolver el producto.

Visite

www.chauvetlighting.com para información de contacto.

¿Qué va

Incluido?

•Intimidator™ Spot LED 350

•Soporte para colgar con material

de montaje

•Cable de alimentación

•Tarjeta de garantía

•Guía de Referencia Rápida

Para Empezar

Desembale su Intimidator™ Spot LED 350 y asegúrese de que ha recibido todas

las partes en buen

estado. Si la caja o los componentes parecen dañados,

notifíqueselo al transportista inmediatamente, no a CHAUVET®.

Descripción del

Producto

El Intimidator™ Spot LED 350 es una luz de cabeza móvil LED que tiene un

foco con motor para efectos de gobo nítidos. Las funciones integradas de macros

de efectos y “move-in-black”

minimizan el tiempo de programación y los

programas automáticos generan espectáculos de forma fácil.

Visión General

Corriente

Alterna

Este producto tiene una fuente de alimentación con detección automática

que puede funcionar con un rango de tensión de entrada de

100~240 VCA, 50/60 Hz.

Alimentación en

Cadena

Puede enlazar hasta 3 unidades Intimidator™ Spot LED 350 a 120 VCA,

y 7 unidades a 230 VCA. Nunca sobrepase este número.

Panel Frontal

Panel Posterior

Entrada

DMX

Entrada de

Alimentación

Portafusibles

Salida de

Alimentación

Salida

DMX

Lazo de

Seguridad

Panel de Control y

Menú de Botón

Andere Handbücher für Intimidator Beam LED 350

Inhaltsverzeichnis

Sprachen:

Andere Chauvet Scheinwerfer Handbücher

Chauvet

Chauvet COLORdash Batten-Hex 8 Bedienungsanleitung

Chauvet

Chauvet Hurricane 1000 Bedienungsanleitung

Chauvet

Chauvet Mini Line Dancer CH-215A Bedienungsanleitung

Chauvet

Chauvet Intimidator Spot Duo 150 Bedienungsanleitung

Chauvet

Chauvet Legend 412 QRG Bedienungsanleitung

Chauvet

Chauvet LED Pinspot 360 Bedienungsanleitung

Chauvet

Chauvet LXW Bedienungsanleitung

Chauvet

Chauvet COLORado Batten 72 Tour Bedienungsanleitung

Chauvet

Chauvet COLORstrip Bedienungsanleitung

Chauvet

Chauvet COLORado Ridge IP Bedienungsanleitung

Chauvet

Chauvet COLORstrip Bedienungsanleitung

Chauvet

Chauvet COLORband PiX Bedienungsanleitung

Chauvet

Chauvet Rogue r2 Beam Bedienungsanleitung

Chauvet

Chauvet Intimidator Barrel LED 300 Bedienungsanleitung

Chauvet

Chauvet SlimPAR HEX 6 IRC Bedienungsanleitung

Chauvet

Chauvet Nexus Bedienungsanleitung

Chauvet

Chauvet Q-WASH 560Z-LED Bedienungsanleitung

Chauvet

Chauvet Q-Spot 560-LED Bedienungsanleitung

Chauvet

Chauvet Scorpion Dual Bedienungsanleitung

Chauvet

Chauvet Q-WASH 560Z-LED Bedienungsanleitung

Chauvet

Chauvet Scorpion GVC Bedienungsanleitung

Chauvet

Chauvet SlimBANK Bedienungsanleitung

Chauvet

Chauvet Techno Strobe 168 Bedienungsanleitung

Chauvet

Chauvet SlimPAR HEX 3 IRC Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken

VIZULO

VIZULO Micro Martin Benutzerhandbuch

EuroLite

EuroLite LED IP FL-100 SMD Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock XB12 Bedienungsanleitung

Allen + Roth

Allen + Roth 17624-000 Bedienungsanleitung

ADJ

ADJ 4 STAGE PAK Bedienungsanleitung

Cooper Lighting

Cooper Lighting EGL91SW233 Bedienungsanleitung

Max

Max 37496 Bedienungsanleitung

BEGA

BEGA 85 143 Bedienungsanleitung

Beamz

Beamz 151.226 Bedienungsanleitung

EuroLite

EuroLite LED IP FL-8 Bedienungsanleitung

Ledj

Ledj PERFORMER 36 RGB Bedienungsanleitung

Perel

Perel ELS3 Bedienungsanleitung

Perel

Perel ELS3WD Bedienungsanleitung

LumX

LumX LM 36130 Bedienungsanleitung

Xtricity

Xtricity 4-80053 Bedienungsanleitung

Stahl

Stahl 6521/4 Series Bedienungsanleitung

Ecosense

Ecosense EcoSpec Bedienungsanleitung

Ayrton

Ayrton minipanel FX Bedienungsanleitung