Chauvet Intimidator Wash LED 150 Bedienungsanleitung

Quick Reference Guide

Intimidator™ Spot LED 150 QRG

About This

Guide

The Intimidator™ Spot LED 150 Quick Reference Guide (QRG) has basic

product information such as mounting, menu options, and DMX values

Download the User Manual from www.chauvetlighting.com for more details.

Disclaimer

The information and specifications contained in this QRG are subject to

change without notice.

Safety Notes

These Safety Notes include important information about installation, use, and

maintenance.

•This product is not intended for permanent installation.

•ONLY connect this product to a grounded and protected circuit.

•Always disconnect from power before cleaning or replacing the fuse.

•DO NOT look at the light source when the product is on.

•Make sure the power cord is not crimped or damaged.

•Never disconnect this product from power cord by pulling or tugging on the

cord.

•When mounting this product overhead, use a safety cable.

•DO NOT allow flammable materials close to the unit while operating.

•DO NOT touch this product when it is operating because it may be hot.

•The voltage of the outlet to which you are connecting this product must be

within the range stated on the decal or rear panel of the product.

•This product is for indoor use only! (IP20) To prevent risk of fire or shock,

do not expose this product to rain or moisture.

•Always mount

this product in a location with adequate ventilation, at least

20 in (50 cm) from adjacent surfaces.

•Be sure that no ventilation slots on the unit’s housing are blocked.

•Never connect this product to a dimmer or rheostat.

•Replace the fuse with the same type and rating.

•ONLY use the hanging/mounting bracket or the handles to carry this

product.

•The maximum ambient temperature is 104° F (40° C). Do not operate this

product at higher temperatures.

•In the event of a serious operating problem, stop using immediately.

•

DO NOT open this product. It contains no user-serviceable parts.

What Is

Included

•Intimidator™ Spot LED 150

•Mounting Bracket

•2 Mounting Bolts

•Safety Eyebolt

•Power Cord

•Warranty Card

•Quick Reference Guide

To Begin

Unpack your Intimidator™ Spot LED 150 and make sure you have received

all parts in good condition. If the box or contents appear damaged, notify the

carrier immediately, not CHAUVET®.

Product

Description

The Intimidator™ Spot LED 150 is a bright, lightweight and compact LED

moving head perfect for mobile applications.

Intimidator™ Spot LED 150 QRG

Product Overview

AC Power

This product has an auto-ranging power supply that can work with an input

voltage range of 100~240 VAC, 50/60 Hz.

Power Linking

You can link up to 6 Intimidator™ Spot LED 150 products at 120 VAC and

12 units at 230 VAC.

Fuse

Replacement

To replace the fuse in the Intimidator™ Spot LED 150:

1. Disconnect the product from power.

2. Using a flat-head screwdriver, loosen the fuse holder and pull

straight out.

3. Remove the blown fuse from the holder and replace with a fuse of

the exact same type and rating.

4. Re-insert the fuse holder and reconnect power.

Fuse Holder

DMX In/Out

Power In/Out

LED Display Cooling Fan

Moving Head

Adjustable Lens

Moving Yoke

Intimidator™ Spot LED 150 QRG

Mounting

Before mounting this product, read the Safety Notes.

Product

Mounting

Diagram

Control Panel

Description

Button Function

<MENU>

Exits from the current menu or function.

<UP>

Navigates upwards through the menu list and increases the

numeric value when in a function.

<DOWN>

Navigates downwards through the menu list and decreases the

numeric value when in a function.

<ENTER>

Enables the currently displayed menu or sets the currently

selected value

Menu Options

Main Level Programming Levels Description

DMX Mode

001-512

Sets the DMX starting address

Operating Mode

SLAv (Son)

Slave operating mode

NASL (SLoU)

Automatic Mode, Slow Program

NAFA (FASt)

Automatic Mode, Fast Program

NStS (SrUn)

Sound Active Mode

Pan

Normal Pan

PAn

Normal Pan operation

Inverse Pan

r PAn

Inverse Pan operation

Tilt

Normal Tilt

tiL

Normal Tilt operation

Inverse Tilt

r tiL

Inverse Tilt operation

Display

Normal Display

diS

Change the LCD display text

Inverse Display

r diS

Channel Mode

11-Channel

Mode

11CH Selects the DMX personality

6-Channel Mode

6CH

Manual Pan Restrict

Pan 540

PA54

Select Pan angle restrictions

Pan 360

PA36

Pan 180

PA18

Manual Tilt Restrict

Tilt 270

Ti27

Select Tilt angle restrictions

Tilt 180

Ti18

Tilt 90

Ti 9

Reset

rESt

Resets fixture

Load

LoAd

Load factory defaults

Bracket Attachment (x2)

Rubber Feet (x4)

Safety Loop Attachment Point

Intimidator™ Spot LED 150 QRG

DMX Linking

The Intimidator™ Spot LED 150 can work with a DMX controller when

linked by DMX serial connections.

Instructions for connecting and

configuring this product for DMX operation are in the User Manual.

If you

are not familiar with DMX, download the DMX Primer

from

www.chauvetlighting.com.

Starting Address

To ensure full access to all channels in each DMX mode, the highest

recommended DMX address is 502.

Master/Slave

Connection

The Intimidator™ Spot LED 150 uses the DMX data connection for its

Master/Slave mode. Instructions for connecting and configuring this product

for Master/Slave operation are in the User Manual.

DMX Values

6-CH

Channel

Function Value Percent/Setting

Pan

000 255

0-540°

Tilt

000 255

0-270°

3 Color

000 005

White

006 011

Yellow

012 017

Magenta

018 023

Green

024 029

Red

030 035

Cyan

036 041

Orange

042 047

Blue

048 053

Light Green

054 063

Amber

064 069

White + Yellow

070 075

Yellow + Magenta

076 081

Magenta + Green

082 087

Green + Red

088 093

Red + Cyan

094 099

Cyan + Orange

100 105

Orange + Blue

106 111

Blue + Light Green

112 117

Light Green + Amber

118 127

Amber + White

128 191

Color cycling rainbow with increasing speed

192 255

Reverse color cycling rainbow with

increasing speed

4 Shutter

000 003

Blackout

004 007

Open

008 215

Strobe (0-20 Hz)

216 255

Open

Intimidator™ Spot LED 150 QRG

6-CH (cont.)

Channel

Function

Value

Percent/Setting

Dimmer

000 255

0-100%

6 Gobo Wheel

064 071

Gobo 9 shake, from slow to fast

072 079

Gobo 8 shake, from slow to fast

080 085

Gobo 7 shake, from slow to fast

086 091

Gobo 6 shake, from slow to fast

092 097

Gobo 5 shake, from slow to fast

098 103

Gobo 4 shake, from slow to fast

104 109

Gobo 3 shake, from slow to fast

110 115

Gobo 2 shake, from slow to fast

116 121

Gobo 1 shake, from slow to fast

122 127

Open

128 191

Cycle effect with increasing speed

192 255

Reverse cycle effect with increasing speed

Intimidator™ Spot LED 150 QRG

11-CH

Channel

Function

Value

Percent/Setting

Pan

000 255

0-540°

Tilt

000 255

0-270°

Fine Pan

000 255

Fine control of panning

Fine Tilt

000 255

Fine control of tilting

Speed

000 255

Pan/Tilt speed (fast to slow)

6 Color

000 005

White

006 011

Yellow

012 017

Magenta

018 023

Green

024 029

Red

030 035

Cyan

036 041

Orange

042 047

Blue

048 053

Light Green

054 063

Amber

064 069

White + Yellow

070 075

Yellow + Magenta

076 081

Magenta + Green

082 087

Green + Red

088 093

Red + Cyan

094 099

Cyan + Orange

100 105

Orange + Blue

106 111

Blue + Light Green

112 117

Light Green + Amber

118 127

Amber + White

128 191

Color cycling rainbow with increasing speed

192 255

Reverse color cycling rainbow with

increasing speed

7 Shutter

000 003

Blackout

004 007

Open

008 215

Strobe (0-20 Hz)

216 255

Open

Dimmer

000 255

0-100%

Intimidator™ Spot LED 150 QRG

11-CH

(cont.)

Channel

Function

Value

Percent/Setting

9 Gobo Wheel

064 071

Gobo 9 shake, from slow to fast

072 079

Gobo 8 shake, from slow to fast

080 085

Gobo 7 shake, from slow to fast

086 091

Gobo 6 shake, from slow to fast

092 097

Gobo 5 shake, from slow to fast

098 103

Gobo 4 shake, from slow to fast

104 109

Gobo 3 shake, from slow to fast

110 115

Gobo 2 shake, from slow to fast

116 121

Gobo 1 shake, from slow to fast

122 127

Open

128 191

Cycle effect with increasing speed

192 255

Reverse cycle effect with increasing speed

10 Control Functions

000 007

No function

008 027

Blackout while pan/tilt moving

028 047

Blackout while moving gobo wheel

048 067

Disable blackout while pan/tilt/moving gobo

wheel

068 087

Blackout while moving color wheel

088 107

Disable blackout while pan/tilt/moving color

wheel

108 127

Disable blackout while moving gobo/color

wheel

128 147

Disable blackout while moving all options

148 167

Reset pan

168 187

Reset tilt

188 207

Reset color wheel

208 227

Reset gobo wheel

228 247

Reset all channels

248 255

No function

11 Auto Programs

000 007

No function

008 135

Auto programs 1-8

136 255

Sound active programs 1-8

Intimidator™ Spot LED 150 QRG

Outside the U.S., United Kingdom, or Ireland, contact your distributor to

request support or return a product. Visit www.chauvetlighting.com

for

contact information.

World Headquarters

CHAUVET®

General Information

Address: 5200 NW 108th Avenue

Sunrise, FL 33351

Voice: (954) 929-1115

Fax: (954) 929-5560

Toll free: (800) 762-1084

United Kingdom and Ireland

CHAUVET® Europe Ltd.

General Information

Address: Unit 1C

Brookhill Road Industrial Estate

Pinxton, Nottingham, UK

NG16 6NT

Voice: +44 (0)1773 511115

Fax: +44 (0)1773 511110

Technical Support

Voice: (954) 929-1115 (Press 4)

Fax: (954) 756-8015

Email: tech@chauvetlighting.com

Technical Support

Email: uktech@chauvetlighting.com

World Wide Web

www.chauvetlighting.com

World Wide Web

www.chauvetlighting.co.uk

Intimidator™ Spot LED 150 QRG – Rev. 1 4TL

Printed in the P. R. C.

Andere Handbücher für Intimidator Wash LED 150

Inhaltsverzeichnis

Andere Chauvet Leuchte Handbücher

Chauvet

Chauvet Q-Wash 436Z-LED Bedienungsanleitung

Chauvet

Chauvet Elan Bedienungsanleitung

Chauvet

Chauvet Q-Spot 575 Handbuch

Chauvet

Chauvet LEG-5000 Handbuch

Chauvet

Chauvet Stepper Handbuch

Chauvet

Chauvet Q-RollTM 250 Bedienungsanleitung

Chauvet

Chauvet SPOT LED 450 Bedienungsanleitung

Chauvet

Chauvet Q-Wash 419Z-LED Bedienungsanleitung

Chauvet

Chauvet Elan Handbuch

Chauvet

Chauvet ILS-625DCR Bedienungsanleitung

Chauvet

Chauvet DMX-685 Bedienungsanleitung

Chauvet

Chauvet F-40 Bedienungsanleitung

Chauvet

Chauvet Constellation DMX-800 Bedienungsanleitung

Chauvet

Chauvet Q-Wash LED Bedienungsanleitung

Chauvet

Chauvet LED-PANEL4 Bedienungsanleitung

Chauvet

Chauvet Q-Spot 250 Bedienungsanleitung

Chauvet

Chauvet Rogue r2 Beam Bedienungsanleitung

Chauvet

Chauvet SlimPAR 64 RGBA Bedienungsanleitung

Chauvet

Chauvet Legend 1200E Wash Bedienungsanleitung

Chauvet

Chauvet Q-Wash LED Bedienungsanleitung

Chauvet

Chauvet MiN Spot Handbuch

Chauvet

Chauvet LEDsplash 2 Bedienungsanleitung

Chauvet

Chauvet COLORsplash JR LED-PAR83 Bedienungsanleitung

Chauvet

Chauvet LED-PALET Handbuch

Beliebte Leuchte Handbücher anderer Marken

Emos

Emos CLASSIC ZY1431T Bedienungsanleitung

Westinghouse

Westinghouse Outdoor Lighting Fixture Bedienungsanleitung

Hedler

Hedler C 12 silent Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Puck: CSI Bedienungsanleitung

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Bedienungsanleitung

Lightmaxx

Lightmaxx Shaft 5R Bedienungsanleitung

Triarch

Triarch 31083 Bedienungsanleitung

Philips

Philips 32614 Series Bedienungsanleitung

IKEA

IKEA TIVED Bedienungsanleitung

Lightolier

Lightolier LP200 Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Bedienungsanleitung

Martin

Martin MAC 250 Krypton Bedienungsanleitung

Cooper Lighting

Cooper Lighting Halo L3232E Bedienungsanleitung

Stageline

Stageline ODW-2410RGBW Bedienungsanleitung

Light Sky

Light Sky Tornado Series Bedienungsanleitung

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Bedienungsanleitung

Lightolier

Lightolier Lytespan 83ED17S Bedienungsanleitung

Lightolier

Lightolier Calculite CS8226 Bedienungsanleitung