Chauvet SPOT LED 450 Bedienungsanleitung

Quick Reference Guide

Intimidator™ Spot LED 450 QRG EN

About This

Guide

The Intimidator™ Spot LED 450

Quick Reference Guide (QRG) has basic

product information such as mounting, menu options, and DMX values.

Download the User Manual from www.chauvetlighting.com for more details.

Disclaimer

The information and specifications contained in this QRG are subject to change

without notice.

Safety Notes

These Safety Notes include important safety information about installation, use,

and maintenance.

•This product is not intended for permanent installation.

•ONLY connect this product to a grounded and protected circuit.

•Always disconnect from power before cleaning or replacing the fuse.

•DO NOT look at the light source when the product is on.

•Make sure the power cord is not crimped or damaged.

•Never disconnect this product from power by pulling on the cord.

•When mounting this product overhead, use a safety cable.

•

DO NOT allow flammable materials close to the unit while operating.

•DO NOT touch this product when it is operating because it may be hot.

•The voltage of the outlet to which you are connecting this product must

be within the range stated on the decal or rear panel of the product.

•This product is for indoor use only! (IP20) To prevent risk of fire or

shock, do not expose this product to rain or moisture.

•

Always mount this product in a location with adequate ventilation, at

least 20 in (50 cm) from adjacent surfaces.

•Be sure that no ventilation slots on the unit’s housing are blocked.

•Never connect this product to a dimmer or rheostat.

•Replace the fuse with the same type and rating.

•ONLY use the hanging/mounting bracket or the handles to carry this

product.

•The maximum ambient temperature is 104° F (40° C). Do not operate

this product at higher temperatures.

•In the event of a serious operating problem, stop using immediately.

•

DO NOT open this product. It contains no user-serviceable parts.

Contact

Outside the U.S., United Kingdom, or Ireland, contact your distributor to request

support or return a product. Visit www.chauvetlighting.com

for contact

information.

EN Intimidator™ Spot LED 450 QRG

What Is

Included

•Intimidator™ Spot LED 450

•Hanging Bracket with Mounting

Hardware

•Power Cord

•Warranty Card

•

Quick Reference Guide

To Begin

Unpack your Intimidator™ Spot LED 450 and make sure you have received all

parts in good condition. If the box or contents appear damaged, notify the carrier

immediately, not CHAUVET®.

Description

The Intimidator™ Spot LED 450 is an LED moving-

head spot that has a

motorized focus for crisp gobo effects. Built-in effect macros and move-in-black

features minimize programming time and auto programs generate easy shows.

Overview

Back Panel View

Power In

Fuse Holder

LCD Screen

DMX Out

DMX In

Front Panel

Button Menu

Intimidator™ Spot LED 450 QRG EN

AC Power

This product has an auto-ranging power supply that can work with an input

voltage range of 100~240 VAC, 50/60 Hz.

Fuse

Replacement

1. Disconnect the product from power.

2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.

3. Pry the safety cap out of the housing.

4. Remove the blown fuse from the clip on the front of the safety cap and

replace with a fuse of the exact same type and rating.

5. Re-insert the fuse holder and reconnect power.

Mounting

Before mounting this product, read the SafetyNotes.

Mounting

Diagram

Control Panel

Description

Button

Function

Exits from the current menu or function

<UP>

Navigates upwards through the menu list and increases

the numeric value when in a function

<DOWN>

Navigates downwards through the menu list and

decreases the numeric value when in a function

<ENTER>

Enables the currently displayed menu or sets the currently

selected value into the selected function

Bracket Attachment

Rubber Feet (x4)

EN Intimidator™ Spot LED 450 QRG

Menu Options

Main Level

Programming Level

Description

DMX Address

001~512

Sets the DMX starting address

Run

Slave

Slave operating mode

Fast

Automatic mode, fast program

Slow

Automatic mode, slow program

Sound

Sound-Active mode

Pan

Normal

Normal pan operation

Reverse

Reverse pan operation

Tilt

Normal

Normal tilt operation

Reverse

Reverse tilt operation

Display

Bright

Display backlight remains on

30Close

Display backlight turns off after 30 seconds

of control panel inactivity

Pan Angle

540

Pan angle restricted to 540°

360

Pan angle restricted to 360°

180

Pan angle restricted to 180°

Tilt Angle

270

Tilt angle restricted to 270°

180

Tilt angle restricted to 180°

Tilt angle restricted to 90°

Channel

ADVANCED

14-channel mode

Basic

8-channel mode

Temp. Disp

Displays LED temperature

ResetSystem

Does not reset fixture

Resets fixture

Load Set

Does not load factory defaults

Loads factory defaults

DMX Linking

The Intimidator™ Spot LED 450 can work with a DMX controller when linked

by DMX serial connections.

Instructions for connecting and configuring this

product for DMX operation are in the User Manual.

If you are not familiar with

DMX, download the DMX Primer from www.chauvetlighting.com.

Starting Address

To ensure full access to all channels in each DMX mode, the highest

recommended DMX address is 499.

Master/Slave

Connection

The Intimidator™ Spot LED 450 uses the DMX data connection for its

Master/Slave mode. Instructions for connecting and configuring this product for

Master/Slave operation are in the User Manual.

Intimidator™ Spot LED 450 QRG EN

DMX Values

Advanced

Mode

Channel Function Value

Percent/Setting

Pan

000 255

0~540°

Fine Pan

000 255

Fine control of panning

Tilt

000 255

0~270°

Fine Tilt

000 255

Fine control of tilting

Speed

000 255

Pan/Tilt speed (fast to slow)

6 Color Wheel

000 007

White

008 015

Blue

016 023

Yellow

024 031

Pink

032 039

Green

040 047

Red

048 055

Light Blue

056 063

Orange Red

064 066

White

067 078

From White to Blue

079 092

From Blue to Yellow

093 107

From Yellow to Pink

108 120

From Pink to Green

121 136

From Green to Red

137 152

From Red to Light Blue

153 170

From Light Blue to Orange Red

171 212

Rainbow effect with increasing speed

213 255

Reverse rainbow effect with increasing speed

7 Gobo Wheel

064 071

Gobo 7 shake with increasing speed

072 079

Gobo 6 shake with increasing speed

080 087

Gobo 5 shake with increasing speed

088 095

Gobo 4 shake with increasing speed

096103

Gobo 3 shake with increasing speed

104111

Gobo 2 shake with increasing speed

112 119

Gobo 1 shake with increasing speed

120 127

Open

128 191

Rainbow effect with increasing speed

192 255

Reverse rainbow effect with increasing speed

EN Intimidator™ Spot LED 450 QRG

DMX Values (cont.)

Advanced

Mode

(cont.)

Channel

Function

Value

Percent/Setting

8 Gobo Rotation

000 063

Indexing

064 147

Rotation with increasing speed

148 231

Reverse rotation with increasing speed

232 255

Boomerang with increasing speed

9 Prism

000 007

Open

008 012

Prism on

013 130

Prism rotation with increasing speed

131 247

Reverse prism rotation with increasing speed

248 255

Static prism effect

Focus

000 255

Motorized focus, zoom out to zoom in

Dimmer

000 255

0~100%

12 Shutter

000 003

Closed

004 007

Open

008 076

Strobe effect with increasing speed

077 145

Pulse strobe

146 215

Random shutter

216 255

Open

13 Control Functions

000 007

No function

008 015

Blackout while pan/tilt moving

016 023

Blackout while moving color wheel

024 031

Blackout while moving gobo wheel

032 039

Disable blackout while pan/tilt/moving color

wheel

040 047

Disable blackout while pan/tilt/moving gobo

wheel

048 055

Disable blackout while moving all options

056 095

No function

096 103

Reset pan

104 111

Reset tilt

112 119

Reset color wheel

120 127

Reset gobo wheel

128 135

Reset gobo rotation

136 143

Reset prism

144 151

Reset focus

152 159

Rest all channels

160 255

No function

Intimidator™ Spot LED 450 QRG EN

DMX Values (cont.)

Advanced

Mode

(cont.)

Channel

Function

Value

Percent/Setting

14 Auto Programs

000 007

No function

008 023

Auto program 1

024 039

Auto program 2

040 055

Auto program 3

056 071

Auto program 4

072 087

Auto program 5

088 103

Auto program 6

104 119

Auto program 7

120 135

Auto program 8

136 151

Sound-activated program 1

152 167

Sound-activated program 2

168 183

Sound-activated program 3

184 199

Sound-activated program 4

200 215

Sound-activated program 5

216 231

Sound-activated program 6

232 247

Sound-activated program 7

248 255

Sound-activated program 8

Basic

Mode

Channel

Function

Value

Percent/Setting

Pan

000 255

0~540°

Tilt

000 255

0~270°

3 Color Wheel

000 007

White

008 015

Blue

016 023

Yellow

024 031

Pink

032 039

Green

040 047

Red

048 055

Light Blue

056 063

Orange Red

064 066

White

067 078

From White to Blue

079 092

From Blue to Yellow

093 107

From Yellow to Pink

108 120

From Pink to Green

121 136

From Green to Red

137 152

From Red to Light Blue

153 170

From Light Blue to Orange Red

171 212

Rainbow effect with increasing speed

213 255

Reverse rainbow effect with increasing speed

EN Intimidator™ Spot LED 450 QRG

DMX Values (cont.)

Basic

Mode

(cont.)

Channel

Function

Value

Percent/Setting

4 Gobo Wheel

064 071

Gobo 7 shake with increasing speed

072 079

Gobo 6 shake with increasing speed

080 087

Gobo 5 shake with increasing speed

088 095

Gobo 4 shake with increasing speed

096103

Gobo 3 shake with increasing speed

104111

Gobo 2 shake with increasing speed

112 119

Gobo 1 shake with increasing speed

120 127

Open

128 191

Rainbow effect with increasing speed

192 255

Reverse rainbow effect with increasing speed

5 Gobo Rotation

000 063

Indexing

064 147

Rotation with increasing speed

148 231

Reverse rotation with increasing speed

232 255

Boomerang with increasing speed

6 Prism

000 007

Open

008 012

Prism on

013 130

Prism rotation with increasing speed

131 247

Reverse prism rotation with increasing speed

248 255

Prism effect

Focus

000 255

Motorized focus, zoom out to zoom in

8 Shutter

000 003

Closed

004 007

Open

008 076

Strobe effect with increasing speed

077 145

Pulse strobe

146 215

Random shutter

216 255

Open

Intimidator™ Spot LED 450 GRR ES

Acerca de Esta

Guía

La Guía de Referencia Rápida (GRR) del Intimidator™ Spot LED 450

contiene

información básica sobre el producto, como montaje, opciones de menú y

valores DMX. Descargue el manual de usuario de

www.chauvetlighting.com

para una información más detallada.

Exención de

Responsabilidad

La información y especificaciones contenidas en esta GRR están sujetas a

cambio sin previo aviso.

Notas de

Seguridad

Estas notas de seguridad incluyen información de seguridad importante sobre el

montaje, uso ymantenimiento.

•Este producto no está cocebido para una instalación permanente.

•Conecte este producto SOLO a un circuito con toma de tierra y

protegido.

•Desconecte siempre de la alimentación antes de la limpieza o

sustitución del fusible.

•NO mire a la fuente de luz cuando el producto esté encendido.

•Asegúrese de que el cable de alimentación no está retorcido ni

estropeado.

•

Nunca desconecte este producto del cable de alimentación agarrando o

tirando del cable.

•Cuando monte este producto en alto, use un cable de seguridad.

•NO permita la presencia de materiales inflamables cerca de la unidad

cuando esté en funcionamiento.

•NO toque este producto cuando esté en funcionamiento, pues podría

estar caliente.

•La tensión del enchufe al que conecte este producto ha de estar en el

rango establecido en el grabado o en el panel posterior de producto.

•¡Este producto es para uso en interiores solamente! (IP20) Para evitar

riesgos de incendio o descarga, no exponga este producto a la lluvia o

la humedad.

•Monte siempre este producto en una ubicación con ventilación

adecuada, al menos a 20'' (50 cm) de superficies adyacentes.

•Asegúrese de que ninguna ranura de ventilación en la carcasa de la

unidad queda bloqueada.

•Nunca conecte este producto a un atenuador o reostato.

•Sustituya el fusible con uno del mismo tipo y categoría.

•Use SOLAMENTE los soportes de colgar/montar o las asas para mover

este producto.

•La máxima temperatura ambiente es de 104º F (40º C). No haga

funcionar este producto a temperaturas más altas.

•En caso de un problema grave de funcionamiento, deje de usarlo

inmediatamente.

•NO abra este producto. No contiene piezas reparables por el usuario.

Andere Handbücher für SPOT LED 450

Inhaltsverzeichnis

Sprachen:

Andere Chauvet Leuchte Handbücher

Chauvet

Chauvet Q-WASH 260-LED Bedienungsanleitung

Chauvet

Chauvet COLORsplash JR LED-PAR83 Bedienungsanleitung

Chauvet

Chauvet Q-Spot 360-LED Bedienungsanleitung

Chauvet

Chauvet LEDsplash 2 Bedienungsanleitung

Chauvet

Chauvet COLORsphere LED-CS8 Bedienungsanleitung

Chauvet

Chauvet LED-BAR Handbuch

Chauvet

Chauvet Legend 1200E Wash Bedienungsanleitung

Chauvet

Chauvet Legend 412Z Bedienungsanleitung

Chauvet

Chauvet Intimidator Wash Zoom 350 IRC Bedienungsanleitung

Chauvet

Chauvet TFX-UVLED Bedienungsanleitung

Chauvet

Chauvet Q-Spot 250 Bedienungsanleitung

Chauvet

Chauvet COLORado 6 Bedienungsanleitung

Chauvet

Chauvet DMX-1655R Produkthandbuch

Chauvet

Chauvet Intimidator COLOR LED Bedienungsanleitung

Chauvet

Chauvet Legend 412 Bedienungsanleitung

Chauvet

Chauvet LEG-5000 Bedienungsanleitung

Chauvet

Chauvet LEG-3000 Bedienungsanleitung

Chauvet

Chauvet LED-PANEL4 Bedienungsanleitung

Chauvet

Chauvet COLORsplash JR LED-PAR83 Bedienungsanleitung

Chauvet

Chauvet Intimidator Spot LED 250 Bedienungsanleitung

Chauvet

Chauvet Followspot 1200 Bedienungsanleitung

Chauvet

Chauvet BLACKLIGHT F-40 Bedienungsanleitung

Chauvet

Chauvet COLORado Zoom TOUR Bedienungsanleitung

Chauvet

Chauvet Q-Wash 436Z-LED Bedienungsanleitung

Beliebte Leuchte Handbücher anderer Marken

Emos

Emos CLASSIC ZY1431T Bedienungsanleitung

Westinghouse

Westinghouse Outdoor Lighting Fixture Bedienungsanleitung

Hedler

Hedler C 12 silent Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Puck: CSI Bedienungsanleitung

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Bedienungsanleitung

Lightmaxx

Lightmaxx Shaft 5R Bedienungsanleitung

Triarch

Triarch 31083 Bedienungsanleitung

Philips

Philips 32614 Series Bedienungsanleitung

IKEA

IKEA TIVED Bedienungsanleitung

Lightolier

Lightolier LP200 Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Bedienungsanleitung

Martin

Martin MAC 250 Krypton Bedienungsanleitung

Cooper Lighting

Cooper Lighting Halo L3232E Bedienungsanleitung

Stageline

Stageline ODW-2410RGBW Bedienungsanleitung

Light Sky

Light Sky Tornado Series Bedienungsanleitung

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Bedienungsanleitung

Lightolier

Lightolier Lytespan 83ED17S Bedienungsanleitung

Lightolier

Lightolier Calculite CS8226 Bedienungsanleitung