Chauvet LEDrain 38 Bedienungsanleitung

LEDrain™38

Snapshot

Ok on Dimmer

Outdoor OK

Sound Activated

DMX/Master/Slave

115V/230V Switch

Replaceable Fuse

User Serviceable

Duty Cycle

USER MANUAL

CHAUVET, 3000 N 29th Ct, Hollywood, FL 33020 U.S.A

(800) 762-1084 – (954) 929-1115

FAX (954) 929-5560

www.chauvetlighting.com

2007-11-28/10:08

LEDrain™38 User Manual 2 2007-11-28/10:08

TABLE OF CONTENTS

BEFORE YOU BEGIN........................................................................................................................................................... 3

WHAT IS INCLUDED..........................................................................................................................................................................................................3

UNPACKING INSTRUCTIONS..............................................................................................................................................................................................3

ACPOWER .....................................................................................................................................................................................................................3

SAFETY INSTRUCTIONS....................................................................................................................................................................................................3

INTRODUCTION ................................................................................................................................................................... 4

FEATURES.......................................................................................................................................................................................................................4

DMXCHANNEL SUMMARY...............................................................................................................................................................................................4

PRODUCT OVERVIEW.......................................................................................................................................................................................................5

SETUP................................................................................................................................................................................... 6

POWER ...........................................................................................................................................................................................................................6

MOUNTING ......................................................................................................................................................................................................................6

OPERATING INSTRUCTIONS.............................................................................................................................................. 7

MASTER/SLAVE MODE.....................................................................................................................................................................................................7

Daisy Chain Connection.....................................................................................................................................................................................7

Dipswitch Options...............................................................................................................................................................................................7

DMXCONTROL MODE.....................................................................................................................................................................................................8

Setting the DMX address...................................................................................................................................................................................8

APPENDIX............................................................................................................................................................................. 9

DMXPRIMER..................................................................................................................................................................................................................9

Fixture Linking....................................................................................................................................................................................................9

DMXCHANNEL VALUES ................................................................................................................................................................................................10

RETURNS PROCEDURE..................................................................................................................................................................................................11

CLAIMS .........................................................................................................................................................................................................................11

PHOTOMETRIC...............................................................................................................................................................................................................11

DMXDIPSWITCH QUICK REFERENCE CHART.................................................................................................................................................................12

TECHNICAL SPECIFICATIONS..........................................................................................................................................................................................13

TECHNICAL SUPPORT....................................................................................................................................................................................................13

BEFORE YOU BEGIN

What is included

¾1 x LEDrain™38

¾1 x Power cable (1 m) and 1 x Linking cable (1.5 m)

¾Warranty Card

¾Users Manual

Unpacking Instructions

Immediately upon receiving a product, carefully unpack the carton, check the contents to ensure that

all parts are present, and have been received in good condition. Notify the shipper immediately and

retain packing material for inspection if any parts appear damaged from shipping or the carton itself

shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture

must be returned to the factory, it is important that the fixture be returned in the original factory box

and packing.

AC Power

This fixture has an auto-switching power supply that can accommodate a wide range of input

voltages. The only thing necessary to do before powering on the unit is to make sure the line voltage

you are applying is within the range of accepted voltages. This fixture will accommodate between

100V and 240V AC. All fixtures must be powered directly off a switched circuit and cannot be run off a

rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used solely for

a 0% to 100% switch.

Warning! All fixtures must be connected to circuits with a suitable Earth Ground.

Safety Instructions

Please read these instructions carefully, which includes important

information about the installation, usage and maintenance?

•Please keep this User Guide for future consultation. If you

sell the unit to another user, be sure that they also receive

this instruction booklet.

•Always make sure that you are connecting to the proper

voltage and that the line voltage you are connecting to is

not higher than that stated on decal or rear panel of the

fixture.

•This product is intended for indoor use only!

•To prevent risk of fire or shock, do not expose fixture to

rain or moisture. Make sure there are no flammable

materials close to the unit while operating.

•The unit must be installed in a location with adequate

ventilation, at least 50cm from adjacent surfaces. Be sure

that no ventilation slots are blocked.

•Always disconnect from power source before servicing or

replacing lamp or fuse and be sure to replace with same

lamp source.

•Secure fixture to fastening device using a safety chain.

Never carry the fixture solely by its head. Use its carrying

handles.

•Maximum ambient temperature is Ta: 40°C. Do not

operate fixture at temperatures higher than this.

•In the event of serious operating problem, stop using the

unit immediately. Never try to repair the unit by yourself.

Repairs carried out by unskilled people can lead to

damage or malfunction. Please contact the nearest

authorized technical assistance center. Always use the

same type spare parts.

•Don’t connect the device to a dimmer pack.

•Make sure power cord is never crimped or damaged.

•Never disconnect power cord by pulling or tugging on the

cord.

•Avoid direct eye exposure to lamp while it is on.

Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any

repairs yourself. In the unlikely event your unit may require service, please contact CHAUVET.

LEDrain™38 User Manual 3 11/28/2007 10:00 AM

CHANNEL INTENSITY CONTROL OF

1 Red

2 Green

3 Blue

4 Color Macros

5 Strobe/Speed

6 Programs

7 Dimmer

INTRODUCTION

Features

CONTROL FEATURES

•7-channel DMX-512 LED narrow beam

•Blackout/static/dimmer/strobe

•Selector switch for sound active or automatic mode

•Static colors and RGB color mixing in master/slave mode via dip switches

ADDITIONAL FEATURES

•Additional power output for daisy chaining units together (max 50 units)

•Built-in automated programs via master/slave

•Built-in sound activated programs via master/slave

•Double-bracket yoke doubles as floor stand

•Low power consumption

OPTIONS

•Programmable: Any universal DMX-512 controller

DMX Channel Summary

LEDrain™38 User Manual 4 11/28/2007 10:00 AM

Product Overview

Min-Max

otary knob

DMX dipswitches:

DMX channel addressing

DMX Connectors

Green LED Status

ON - signifies the par can is set to be

controlled via DMX

OFF – Par can is set to either

Automatic or Sound Active mode as

previously selected by the Music/Auto

switch

Hanging yoke

also floor stand

for uplighting.

Music/Auto switch

Power Input

Connector

Fuse Holde

Power Link

Out

LEDrain™38 User Manual 5 11/28/2007 10:00 AM

Introduction

Hanging Clamp

(sold separately)

SETUP

Power

This fixture has an auto-switching power supply that can accommodate a wide range of input voltages. The

only thing necessary to do before powering on the unit is to make sure the line voltage you are applying is

within the range of accepted voltages. This fixture will accommodate between 100V and 240V AC. To

determine the power requirements for a particular fixture, see the label affixed to the back plate of the

fixture or refer to the fixture’s specifications chart.

•A fixture’s listed current rating is its average current draw under normal conditions.

•All fixtures must be powered directly off a switched circuit and cannot be run off a rheostat

(variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used solely for a 0%

to 100% switch.

•All fixtures must be connected to circuits with a suitable Earth Ground.

Power Cable Configuration

CABLE PIN INTERNATIONAL

BROWN Live L

BLUE Neutral N

YELLOW/GREEN Earth EG (Ground)

Mounting

Orientation

This fixture may be mounted in any position provided there is

adequate room for ventilation.

Rigging

The fixture includes a mounting yoke to which 1 rigging clamp can be bolted.

1. Align the clamp screw with the center hole on the yoke and tighten.

2. Verify the structure can hold 10 times the weight of all to-be installed fixtures.

3. Adjust the angle on the yoke arm as necessary.

LEDrain™38 User Manual 6 2007-11-28/10:08

LEDrain™38 User Manual 7 11/28/2007 10:00 AM

OPERATING INSTRUCTIONS

The LEDrain™38 is a DMX-512 controllable, full RGB color mix par can made up of highly efficient

and bright LEDS measuring 10mm in diameter. All red, green and blue LEDs can be controlled

separately allowing the creation of an unlimited range of colors.

The LEDrain™38 can operate in Stand-Alone, Master/Slave and via DMX-512 control utilizing 6 DMX

channels.

Master/Slave Mode

The Master/Slave mode will allow you to link up to as many units you want in a daisy chain fashion. In

this mode, the first unit in the daisy chain will automatically command all other units following.

1. Connect all LEDrain™38 units in a daisy chain fashion as described in the section following.

2. Dipswitch settings on slave fixtures are not required and will have no affect.

3. Set all dipswitches on the Master unit to the “Off” position and the unit will run it’s built in color

change program.

OPTIONS

- Set Music/Auto switch to Music and for sound-activated triggering of the program

- Set Music/Auto switch to Auto then use the rotary dial to adjust speed of the program

- See below under Dipswitch Options for additional program settings

Daisy Chain Connection

1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector

of the first fixture.

2. Connect the end of the cable coming from the first fixture which will have a (female) 3 pin

connector to the input connector of the next fixture consisting of a (male) 3 pin connector. Then,

proceed to connect from the output as stated above to the input of the following fixture and so on.

Dipswitch Options

FUNCTIONS DIPSWITCHES (ON ) NOTES &DESCRIPTION

Manual color 1-8

Dipswitches 1-2: Red level (1 on = 50%, 2 on = 75%, 1-2 on = 100%)

Dipswitches 3-4: Green level (1 on = 50%, 2 on = 75%, 1-2 on = 100%)

Dipswitches 5-6: Blue level (1 on = 50%, 2 on = 75%, 1-2 on = 100%)

Music/Auto switch has no function in this mode

Color change program 8 Music/Auto switch

Music: Sound Activated, Rotary knob sets sound sensitivity

Auto: Rotary knob sets speed of program

Very slow color cross-fade

program 9 Music/Auto switch has no function in this mode

Appendix

DMX Control Mode

Operating in a DMX Control mode environment gives the user the greatest flexibility when it comes to

customizing or creating a show. In this mode you will be able to control each individual trait of the

fixture and each fixture independently. The LEDrain™38 uses 7 channels of control.

Note: Dipswitch 10 must be turned on to activate DMX control mode.

Note: Older 8-dipswitch version must have dipswitch 8 turned off to activate DMX control

mode. Dipswitches 1-7 set the DMX address, and the maximum address is 127.

Setting the DMX address

This DMX mode enables the use of a universal DMX controller device. Each fixture requires a "start

address" from 1 to 511. A fixture requiring one or more channels for control begins to read the data

on the channel indicated by the start address. For example, a fixture that occupies or uses 7 channels

of DMX and was addressed to start on DMX channel 100, would read data from channels: 100, 101,

102, 103, 104, 105 and 106. Choose start addresses so that the channels used do not overlap and

notate the start address selected for future reference.

If this is your first time addressing a fixture using the DMX-512 control protocol than I suggest jumping

to the Appendix Section and read the heading “DMX Primer”. It contains very useful information that

will help you understand its use.

Set the start address using the group of DIP switches located usually on bottom of the fixture. Each

dip switch has an associated value. Adding the value of each switch in the ON position will provide

the start address. Determining which switches to toggle ON given a specific start address can be

accomplished in the following manner. By subtracting the largest switch value possible from the

selected start address until zero is achieved.

EXAMPLE STARTING ADDRESS

Address 10

Pin # 4 = 8

Pin # 2 = 2

Total = 10

Address 24

Pin # 5 = 16

Pin # 4 = 8

Total = 24

Resolving address using

simple math.

Address 233

233 – (128) = 105, Turn ON Dip # 8

105 – (64) = 41, Turn ON Dip # 7

41 – (32) = 9, Turn ON Dip # 6

9 – (8) = 1, Turn ON Dip # 4

1 – (1) = 0, Turn ON Dip # 1

You will most likely use the first

available number which maybe

number 1. This number was

selected for example purposes.

DIP SWITCH (DMX VALUE)

128

7 8

128

LEDrain™38 User Manual 8 2007-11-28/10:08

Appendix

APPENDIX

DMX Primer

There are 512 channels in a DMX-512 connection. Channels may be assigned in any manner. A

fixture capable of receiving DMX-512 will require one or a number of sequential channels. The user

must assign a starting address on the fixture that indicates the first channel reserved in the controller.

There are many different types of DMX controllable fixtures and they all may vary in the total number

of channels required. Choosing a start address should be planned in advance. Channels should

never overlap. If they do, this will result in erratic operation of the fixtures whose starting address is

set incorrectly. You can however, control multiple fixtures of the same type using the same starting

address as long as the intended result is that of unison movement or operation. In other words, the

fixtures will be slaved together and all respond exactly the same.

DMX fixtures are designed to receive data through a serial Daisy Chain. A Daisy Chain connection is

where the DATA OUT of one fixture connects to the DATA IN of the next fixture. The order in which

the fixtures are connected is not important and has no effect on how a controller communicates to

each fixture. Use an order that provides for the easiest and most direct cabling. Connect fixtures

using shielded two conductor twisted pair cable with three pin XLR male to female connectors. The

shield connection is pin 1, while pin 2 is Data Negative (S-) and pin 3 is Data positive (S+). CHAUVET

carries 3-pin XLR DMX compliant cables, DMX-10 (33’), DMX-4.5 (15’) and DMX-1.5 (5’)

Fixture Linking

Note! r with a 5 pin DMX output connector, you will need to use a 5

HAUVET Model No: DMX5M.

Conductor 5 Pin Male (Input)

COMMON

DMX +

DMX -

INPUT OUTPUT

DMX connector configuration

Termination reduces signal errors and to

avoid signal transmission problems and

interference, it is always advisable to

connect a DMX signal terminator.

Resistance 120

ohm 1/4w between

pin 2 (DMX -) and

pin 3 (DMX +) of

the last fixture.

If you use a controlle

pin to 3 pin adapter. C

The chart below details a proper cable conversion:

3PIN TO 5PIN CONVERSION CHART

3 Pin Female (output)

Ground/Shield Pin 1 Pin 1

Data ( - )signal Pin 2 Pin 2

Data ( + ) signal Pin 3 Pin 3

Do not use Do enot us

Do not use Do not use

LEDrain™38 User Manual 9 2007-11-28/10:08

Appendix

DMX Channel Values

CHANNEL VALUE FUNCTION NOTES

1 000 Ù255 Red: ( 0% ~ 100% )

2 000 Ù255 Green: ( 0% ~ 100% )

3 000 Ù255 Blue: ( 0% ~ 100% )

000 Ù007

008 Ù015

016 Ù023

024 Ù031

032 Ù039

040 Ù047

048 Ù055

056 Ù063

064 Ù071

072 Ù079

080 Ù087

088 Ù095

096 Ù103

104 Ù111

112 Ù119

120 Ù127

128 Ù135

136 Ù143

144 Ù151

152 Ù159

160 Ù167

168 Ù175

176 Ù183

184 Ù191

192 Ù199

200 Ù207

208 Ù215

216 Ù223

224 Ù231

232 Ù239

240 Ù247

248 Ù255

Macro Colors (By LED levels)

Off

Red: 100% Green: 20% Blue:

Red: 100% Green: 40% Blue

Red: 100% Green: 60% Blue:

Red: 100% Green: 80% Blue:

Red: 100% Green: 100% Blue:

Red: Green: 100% Blue:

Red: Green: 100% Blue: 20%

Red: Green: 100% Blue: 40%

Red: Green: 100% Blue: 60%

Red: Green: 100% Blue: 80%

Red: Green: 100% Blue: 100%

Red: Green: Blue: 100%

Red: 20% Green: Blue: 100%

Red: 40% Green: Blue: 100%

Red: 60% Green: Blue: 100%

Red: 80% Green: Blue: 100%

Red: 100% Green: Blue: 100%

Red: 100% Green: 25% Blue: 100%

Red: 100% Green: 50% Blue: 100%

Red: 100% Green: 75% Blue: 100%

Red: 100% Green: 100% Blue: 100%

Red: 100% Green: 100% Blue: 25%

Red: 100% Green: 100% Blue: 50%

Red: 100% Green: 100% Blue: 75%

Red: 100% Green: 100% Blue: 100%

Red: 20% Green: 100% Blue: 100%

Red: 40% Green: 100% Blue: 100%

Red: 60% Green: 100% Blue: 100%

Red: 80% Green: 100% Blue: 100%

Red: 100% Green: 100% Blue: 100%

Red: 50% Green: 50% Blue: 50%

5 000 Ù255 Strobe or Speed: ( 0% ~ 100% )

000 Ù127

128 Ù159

160 Ù223

224 Ù255

Preset Programs

No Function

Fade Program: Use Ch 5 to adjust speed

Color Chase: Use Ch5 to adjust speed

Color Chase: Use rotary knob to adjust speed

7 000 Ù255 Dimmer: ( 0% ~ 100% )

LEDrain™38 User Manual 10 2007-11-28/10:08

Andere Handbücher für LEDrain 38

Inhaltsverzeichnis

Andere Chauvet Leuchte Handbücher

Chauvet

Chauvet Rogue R1 Bedienungsanleitung

Chauvet

Chauvet Q-Wash LED Bedienungsanleitung

Chauvet

Chauvet DMX-690 Bedienungsanleitung

Chauvet

Chauvet COLORado 6 Bedienungsanleitung

Chauvet

Chauvet DMX Abyss DMX-450 Bedienungsanleitung

Chauvet

Chauvet Stepper Bedienungsanleitung

Chauvet

Chauvet LED-BANK4 Bedienungsanleitung

Chauvet

Chauvet LED-PAR200B Bedienungsanleitung

Chauvet

Chauvet Moonflower Bedienungsanleitung

Chauvet

Chauvet LED-PALET Handbuch

Chauvet

Chauvet Legend 412Z Bedienungsanleitung

Chauvet

Chauvet Freedom Strip Mini Quad-5 Bedienungsanleitung

Chauvet

Chauvet COLORsplash JR LED-PAR83 Bedienungsanleitung

Chauvet

Chauvet DL-LEDW Bedienungsanleitung

Chauvet

Chauvet COLORsplash JR LED-PAR83 Bedienungsanleitung

Chauvet

Chauvet COLORado 3 Bedienungsanleitung

Chauvet

Chauvet LG-20 Bedienungsanleitung

Chauvet

Chauvet SX Abyss Bedienungsanleitung

Chauvet

Chauvet intimidator scan led 100 Bedienungsanleitung

Chauvet

Chauvet Intimidator Wash Zoom 350 IRC Bedienungsanleitung

Chauvet

Chauvet Scorpion Scan LG-60 Bedienungsanleitung

Chauvet

Chauvet STRIKE 1 Bedienungsanleitung

Chauvet

Chauvet Legend 412Z Bedienungsanleitung

Chauvet

Chauvet Q-Wash 436Z-LED Bedienungsanleitung

Beliebte Leuchte Handbücher anderer Marken

Emos

Emos CLASSIC ZY1431T Bedienungsanleitung

Westinghouse

Westinghouse Outdoor Lighting Fixture Bedienungsanleitung

Hedler

Hedler C 12 silent Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Puck: CSI Bedienungsanleitung

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Bedienungsanleitung

Lightmaxx

Lightmaxx Shaft 5R Bedienungsanleitung

Triarch

Triarch 31083 Bedienungsanleitung

Philips

Philips 32614 Series Bedienungsanleitung

IKEA

IKEA TIVED Bedienungsanleitung

Lightolier

Lightolier LP200 Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Bedienungsanleitung

Martin

Martin MAC 250 Krypton Bedienungsanleitung

Cooper Lighting

Cooper Lighting Halo L3232E Bedienungsanleitung

Stageline

Stageline ODW-2410RGBW Bedienungsanleitung

Light Sky

Light Sky Tornado Series Bedienungsanleitung

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Bedienungsanleitung

Lightolier

Lightolier Lytespan 83ED17S Bedienungsanleitung

Lightolier

Lightolier Calculite CS8226 Bedienungsanleitung