Chicago Electric 65756 Installationshandbuch

19.2V 2-SPEED DRILL

65756

SET UP AND OPERATING INSTRUCTIONS

Distributed exclusively by Harbor Freight Tools®.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

contained herein may be reproduced in any shape or form without the express written consent of

Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein. Tools required for

assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

SKU 65756 For technical questions, please call 1-800-444-3353. Page 2

SAVE THIS MANUAL

Keep this manual for the safety warn-

ings and precautions, assembly, operat-

ing, inspection, maintenance and cleaning

procedures. Write the product’s serial

number in the back of the manual near the

assembly diagram (or month and year of

purchase if product has no number). Keep

this manual and the receipt in a safe and

dry place for future reference.

IMPORTANT SAFETY

INFORMATION

In this manual, on the labeling,

and all other information provid-

ed with this product:

This is the safety alert

symbol. It is used to alert

you to potential personal

injury hazards. Obey all

safety messages that

follow this symbol to avoid

possible injury or death.

DANGER indicates

a hazardous

situation which, if not

avoided, will result in death or

serious injury.

WARNING

indicates a

hazardous situation which, if

not avoided, could result in

death or serious injury.

CAUTION, used

with the safety

alert symbol, indicates a

hazardous situation which, if

not avoided, could result in

minor or moderate injury.

NOTICE is used to

address practices

not related to personal injury.

CAUTION, without

the safety alert

symbol, is used to address

practices not related to

personal injury.

General Power Tool Safety

Warnings

WARNING Read all safety

warnings and instructions.

Failure to follow the warnings and

instructions may result in electric

shock, re and/or serious injury.

Save all warnings and

instructions for future reference.

The term ″power tool″ in the

warnings refers to your mains-

operated (corded) power tool or

battery-operated (cordless) power

tool.

Work area safety1.

Keep work area clean and well lit.a.

Cluttered or dark areas invite acci-

dents.

Do not operate power tools inb.

explosive atmospheres, such as in

the presence of ammable liquids,

gases or dust. Power tools create

sparks which may ignite the dust or

fumes.

Keep children and bystandersc.

away while operating a power tool.

Distractions can cause you to lose

control.

Electrical safety2.

Power tool plugs must match thea.

outlet. Never modify the plug in

any way. Do not use any adapter

SKU 65756 For technical questions, please call 1-800-444-3353. Page 3

plugs with grounded power tools.

Unmodied plugs and matching out-

lets will reduce risk of electric shock.

Avoid body contact with groundedb.

surfaces such as pipes, radiators,

ranges and refrigerators. There is

an increased risk of electric shock if

your body is grounded.

Do not expose power tools to rainc.

or wet conditions. Water entering

a power tool will increase the risk of

electric shock.

Do not abuse the cord. Never used.

the cord for carrying, pulling or

unplugging the power tool. Keep

cord away from heat, oil, sharp

edges or moving parts. Damaged

or entangled cords increase the risk

of electric shock.

When operating a power tool out-e.

doors, use an extension cord suit-

able for outdoor use. Use of a cord

suitable for outdoor use reduces the

risk of electric shock.

If operating a power tool in a dampf.

location is unavoidable, use a

Ground Fault Circuit Interrupter

(GFCI) protected supply. Use of

a GFCI reduces the risk of electric

shock.

Personal safety3.

Stay alert, watch what you are do-a.

ing and use common sense when

operating a power tool. Do not use

a power tool while you are tired

or under the inuence of drugs,

alcohol or medication. A moment

of inattention while operating power

tools may result in serious personal

injury.

Use personal protective equip-b.

ment. Always wear eye protection.

Safety equipment such as dust mask,

non-skid safety shoes, hard hat, or

hearing protection used for appropri-

ate conditions will reduce personal

injuries.

Prevent unintentional starting.c.

Ensure the switch is in the off-po-

sition before connecting to power

source and/or battery pack, pick-

ing up or carrying the tool. Carry-

ing power tools with your nger on

the switch or energizing power tools

that have the switch on invites acci-

dents.

Remove any adjusting key ord.

wrench before turning the power

tool on. A wrench or a key left at-

tached to a rotating part of the power

tool may result in personal injury.

Do not overreach. Keep propere.

footing and balance at all times.

This enables better control of the

power tool in unexpected situations.

Dress properly. Do not wear loosef.

clothing or jewelry. Keep your

hair, clothing and gloves away

from moving parts. Loose clothes,

jewelry or long hair can be caught in

moving parts.

If devices are provided for the con-g.

nection of dust extraction and col-

lection facilities, ensure these are

connected and properly used. Use

of these devices can reduce dust-

related hazards.

Only use safety equipment thath.

has been approved by an appropri-

ate standards agency. Unapproved

safety equipment may not provide

adequate protection. Eye protection

must be ANSI-approved and breath-

ing protection must be NIOSH-ap-

SKU 65756 For technical questions, please call 1-800-444-3353. Page 4

proved for the specic hazards in the

work area.

Power tool use and care4.

Do not force the power tool. Usea.

the correct power tool for your ap-

plication. The correct power tool will

do the job better and safer at the rate

for which it was designed.

Do not use the power tool if theb.

switch does not turn it on and off.

Any power tool that cannot be con-

trolled with the switch is dangerous

and must be repaired.

Disconnect the plug from thec.

power source and/or the battery

pack from the power tool before

making any adjustments, chang-

ing accessories, or storing power

tools. Such preventive safety mea-

sures reduce the risk of starting the

power tool accidentally.

Store idle power tools out of thed.

reach of children and do not allow

persons unfamiliar with the power

tool or these instructions to oper-

ate the power tool. Power tools are

dangerous in the hands of untrained

users.

Maintain power tools. Check fore.

misalignment or binding of moving

parts, breakage of parts and any

other condition that may affect the

power tool’s operation. If dam-

aged, have the power tool repaired

before use. Many accidents are

caused by poorly maintained power

tools.

Keep cutting tools sharp andf.

clean. Properly maintained cutting

tools with sharp cutting edges are

less likely to bind and are easier to

control.

Use the power tool, accessoriesg.

and tool bits etc. in accordance

with these instructions, taking into

account the working conditions

and the work to be performed. Use

of the power tool for operations differ-

ent from those intended could result

in a hazardous situation.

Battery tool use and care5.

Recharge only with the chargera.

specied by the manufacturer. A

charger that is suitable for one type of

battery pack may create a risk of re

when used with another battery pack.

Use power tools only with speci-b.

cally designated battery packs.

Use of any other battery packs may

create a risk of injury and re.

When battery pack is not in use,c.

keep it away from other metal ob-

jects, like paper clips, coins, keys,

nails, screws or other small metal

objects, that can make a connec-

tion from one terminal to another.

Shorting the battery terminals togeth-

er may cause burns or a re.

Under abusive conditions, liquidd.

may be ejected from the battery;

avoid contact. If contact acciden-

tally occurs, ush with water. If

liquid contacts eyes, additionally

seek medical help. Liquid ejected

from the battery may cause irritation

or burns.

Service6.

Have your power tool serviced bya.

a qualied repair person using

only identical replacement parts.

This will ensure that the safety of the

power tool is maintained.

SKU 65756 For technical questions, please call 1-800-444-3353. Page 5

(PRODUCT) Safety Warnings

Maintain labels and nameplates on1.

the tool. These carry important safety

information. If unreadable or miss-

ing, contact Harbor Freight Tools for a

replacement.

Avoid unintentional starting. Prepare2.

to begin work before turning on the

tool.

Do not lay the tool down until it has3.

come to a complete stop. Moving

parts can grab the surface and pull

the tool out of your control.

When using a handheld power tool,4.



both hands to resist starting torque.

Do not leave the tool unattended5.

when it is plugged into an electrical

outlet. Turn off the tool, and unplug it

from its electrical outlet before leav-

ing.

6. The battery charger gets

hot during use. The

charger’s heat can build

up to unsafe levels and



receive adequate ventilation, due to

an electrical fault, or if it is used in a

hot environment.

-

mable surface. Do not obstruct any

vents on the charger. Especially

avoid placing the charger on car-

pets and rugs; they are not only

ammable, but they also obstruct

vents under the charger.

Place the charger on a stable, solid,



stable metal workbench or concrete







smoke detector in the area. Fre-

quently monitor the charger and

battery during use.

This product is not a toy. Keep it out7.

of reach of children.

People with pacemakers should8.

consult their physician(s) before use.

-

imity to heart pacemaker could cause

pacemaker interference or pacemak-

er failure. In addition, people with

pacemakers should:





on.



avoid electrical shock.



grounded. Ground Fault Circuit Inter-

rupter (GFCI) should also be imple-

mented – it prevents sustained elec-

trical shock.

Some dust created by power sand-

ing, sawing, grinding, drilling, and

other construction activities, contains

chemicals known [to the State of Cali-

fornia] to cause cancer, birth defects

or other reproductive harm. Some

examples of these chemicals are:



-

ment or other masonry products

-

cally treated lumber

Your risk from these exposures var-

ies, depending on how often you do

this type of work. To reduce your

exposure to these chemicals: work in

a well ventilated area, and work with

approved safety equipment, such as

those dust masks that are specially



SKU 65756 For technical questions, please call 1-800-444-3353. Page 6

particles. (California Health & Safety

Code § 25249.5, et seq.)

WARNING: Handling the cord on9.

this product will expose you to lead,

a chemical known to the State of

California to cause cancer, and birth

defects or other reproductive harm.

Wash hands after handling. (Califor-

nia Health & Safety Code § 25249.5,

et seq.)

The warnings, precautions, and in-10.

structions discussed in this instruction

manual cannot cover all possible con-

ditions and situations that may occur.

It must be understood by the operator

that common sense and caution are

factors which cannot be built into this

product, but must be supplied by the

operator.

Vibration Safety

This tool vibrates during use. Re-

peated or long-term exposure to

vibration may cause temporary or



to the hands, arms and shoulders. To

reduce the risk of vibration-related



Anyone using vibrating tools regu-1.

larly or for an extended period should



then have regular medical check-

ups to ensure medical problems are

not being caused or worsened from

use. Pregnant women or people

who have impaired blood circulation

-

vous system disorders, diabetes, or

Raynaud’s Disease should not use

this tool. If you feel any medical or

physical symptoms related to vibra-

tion (such as tingling, numbness, and



advice as soon as possible.

Do not smoke during use. Nico-2.

tine reduces the blood supply to the





Wear suitable gloves to reduce the3.

vibration effects on the user.

Use tools with the lowest vibration4.

when there is a choice between dif-

ferent processes.

Include vibration-free periods each5.

day of work.

Grip tool as lightly as possible (while6.



the tool do the work.

To reduce vibration, maintain the tool7.

as explained in this manual. If any

abnormal vibration occurs, stop use

immediately.

SAVE THESE

INSTRUCTIONS

Symbology

Double Insulated

Canadian Standards Association



V~ Volts Alternating Current

AAmperes

n0xxxx/min. 

(RPM)

SKU 65756 For technical questions, please call 1-800-444-3353. Page 7

SPECIFICATIONS

Battery Charger

Input 

Battery Type NiCd, 19.2 V, 1.7 Ah

Battery Charging

Time 5 Hours Max.

Drill



0-350 RPM / 0-1,300

RPM; Variable Speed;

Reversible; 24 Torque

Settings; Pistol Grip;



UNPACKING

When unpacking, make sure that the

item is intact and undamaged. If any parts

are missing or broken, please call Harbor

Freight Tools at the number shown on the

cover of this manual as soon as possible.

List of contents

Description Q’ty

2-Speed Drill 1

AC/DC Charger Base 1

1/4", 3/16", 5/32", 1/8", 3/32" &

1/16" Drill Bits

NiCd, 19.2 V, 1.7 Ah Battery 1

1/4" and 3/16" slotted, #1 and #2



Read the ENTIRE IMPORTANT SAFETY

INFORMATION section at

the beginning of this manual

including all text under

subheadings therein before set

up or use of this product.

TO PREVENT

SERIOUS INJURY

FROM ACCIDENTAL

OPERATION:

Turn the Power Switch of the

tool to its “OFF” position and

unplug the tool from its

electrical outlet before

assembling or making any

adjustments to the tool.

Note: For additional information regarding

the parts listed in the following pages,

refer to the Assembly Diagram near

the end of this manual.

Product Features

NOTE: For additional information regarding

the parts listed in the following pages, refer

to the Assembly Diagram on page 12.

1. WARNING! Always make sure

the Trigger of the Cordless Drill is in

its “OFF” position, the Battery Pack

(22) is removed from the Cordless

Drill, and the Charger (26) is un-

plugged from its electrical outlet prior



tool. (See Figure A on page 8)

Chuck (11)2. :Accepts up to 3/8” shank

diameter Drill Bits (not included). To

install a Drill Bit with the Cordless

Drill pointed away from your body,



and turn the Chuck clockwise. Insert

the shank of a Drill Bit all the way into

the Chuck. While holding the Chuck

Sleeve in place, turn the Chuck coun-

terclockwise to lock the Drill Bit in

place. (See Figure A on page 8)

REV 09b

SKU 65756 For technical questions, please call 1-800-444-3353. Page 8

CHARGE

INDICATOR

LIGHT

FIGURE A

TRIGGER

(19)

CHUCK (11)

TORQUE

SELECTOR RING

BATTERY PACK

(22)

AUXILIARY

HANDLE DEPTH

GAUGE

Trigger (19)3. :The Trigger is operated

manually

Trigger to turn on the Cordless Drill

and releasing pressure on the Trigger

to turn off the Cordless Drill. The drill

will go faster the more the trigger is



(See Figure A.)

Reversing Lever (23)4. :The Re-



change the rotational direction of the

Cordless Drill. To change the rota-

tional direction, make sure the Cord-

less Drill is at a complete stop. For a

clockwise rotation, move the Switch

to the right. For a counterclockwise

rotation, move the Switch to the left.

(See Figure A.)

Torque Selector Ring:5. The Torque

Selector Ring allows you to select up

to 16 different driving torque settings,



change the driving torque, make

sure the Cordless Drill is at a com-

plete stop. Then, simply turn the

Torque Selector Ring to the desired

setting. The drill setting is used to

force the chuck not to slip and is used

when drilling. (See Figure A.)

CHARGING INSTRUCTIONS

NOTE:1. The Battery Pack (22) re-



requires a 5 hour charge time prior to

using the Cordless Drill. (See Figure

A.)

When the Battery Pack (22) requires2.

recharging, 3-5 hour charge allows

the tool to operate at full power. Do

not recharge the Battery Pack longer

than 5 hours, as damage to the Bat-

tery Pack and/or Adapter (26) may

occur.Do not leave the charger unat-

tended while charging. (See Figure

A.)

Make sure the Trigger on the Cord-3.

less Drill is in its “OFF” position.

Slide the Battery Pack (22) off of the

Handle of the Cordless Drill. Next,

slide the connector end of the adapt-

er onto the Charging Socket of the

Battery Pack. Then, plug the Adapter

(26) into the a 120 volt, electrical out-

let. (See Figure A.)

SKU 65756 For technical questions, please call 1-800-444-3353. Page 9

Verify that the charging indicator light4.

comes on. If it does not come on,

check the power cord connection.

Charge the Battery Pack (22) no lon-

ger that 5 hours.

NOTE:5. When the Battery Pack (22)

is fully charged, the red indicator light

will turn off due to the thermal protec-

tion in the battery.

Remove the battery from the charger6.

and disconnect the charger from the

electrical outlet.

NOTE7. : While charging, the Battery

Pack (22) and Adapter (28) may be-

come warm to the touch. This is nor-

mal, and does not indicate a problem.

(See Figure A.)

OPERATING INSTRUCTIONS

Read the ENTIRE IMPORTANT

SAFETY INFORMATION

section at the beginning of this

manual including all text under

subheadings therein before set

up or use of this product.

TO PREVENT

SERIOUS INJURY

FROM ACCIDENTAL

OPERATION:

Turn the Power Switch of the

tool to its “OFF” position and

remove the battery from the

drill before performing any

inspection, maintenance, or

cleaning procedures.

If possible, install the Side Handle1.

(21) to allow better control of the

drill. If desired, insert the Depth

Gauge (25) through the hole in the

Side Handle. The Depth Gauge (25)



depth.

When installing Drill Bits, make sure2.

the Battery Pack (22) is removed

from the Cordless Drill to avoid acci-

dental starting. Then, insert and lock

in place a Drill Bit in the Chuck (11) of

the Cordless Drill.

Whenever possible, secure the work-3.

piece in place, using a vise or clamps

(not included).

When drilling in light gauge metal or4.

wood, use a wooden block to back up

the material to prevent damage to the

workpiece.

Mark the center of the hole to be5.

drilled with a center punch to give a

Drill Bit a start and to prevent it from

“walking”.

6.

when drilling iron or steel. Use a

coolant when drilling nonferrous met-

als such as copper, brass, or alumi-

num.

FIGURE B

HANDLE

BATTERY PACK (22)

SKU 65756 For technical questions, please call 1-800-444-3353. Page 10

Insert the fully charged battery Pack7.

(22) into the Handle of the drill. (See

Figure B.)

Make sure to hold the Cordless Drill8.



the Motor will cause the tool to twist.

Observe the9. top of the Cordless Drill.

(See Figure C.)

The Cordless Drill is equipped with10.



-

ure C.)

11.

allows the Red, Yellow, and Green



12.

indicate the Battery Pack’s (22)

-

nated means the Battery Pack is at

full

illuminated means the Battery Pack

is partially charged. The Red alone

illuminated means the Battery Pack is

almost fully discharged, and requires

recharging. (See Figure C.)

The Speed Selector can be used,13.

while the drill is stopped to change

the gear of the drill. Gear 1 is for

higher torque, while gear 2 is for

faster speed.

Turn the Cordless Drill on, using the14.

Trigger.

Do not drill into areas where you15.

cannot identify any possible haz-

ards such as electric wires and

cables behind the drilling surface.

Drill only as deep as necessary.

16.

breaks through the workpiece, de-

crease the drilling pressure when the

point of the Drill Bit breaks through

the workpiece.

SPEED

SELECTOR

FIGURE C

LEVEL

RED LIGHT

YELLOW LIGHT

GREEN LIGHT

LIGHT

ACTIVATOR

Inhaltsverzeichnis

Andere Chicago Electric Bohren Handbücher

Chicago Electric

Chicago Electric VARIABLE SPEED 18 VOLT CORD- LESS DRILL/HAMMER DRILL... Bedienungsanleitung

Chicago Electric

Chicago Electric 67089 Installationshandbuch

Chicago Electric

Chicago Electric 42564 Bedienungsanleitung

Chicago Electric

Chicago Electric 94434 Bedienungsanleitung

Chicago Electric

Chicago Electric 68856 Bedienungsanleitung

Chicago Electric

Chicago Electric 1/2" variable Speed Reversible HEAVY DUTY DRILL... Montageanleitung

Chicago Electric

Chicago Electric Chicago 44849 Betriebsanleitung

Chicago Electric

Chicago Electric 93632 Bedienungsanleitung

Chicago Electric

Chicago Electric 97594 Installationshandbuch

Chicago Electric

Chicago Electric 95848 Bedienungsanleitung

Chicago Electric

Chicago Electric 47991 Stücklistenhandbuch

Chicago Electric

Chicago Electric 98179 Montageanleitung

Chicago Electric

Chicago Electric 97907 Installationshandbuch

Chicago Electric

Chicago Electric 66006 Installationshandbuch

Chicago Electric

Chicago Electric 45338 Installationshandbuch

Chicago Electric

Chicago Electric 95877 Montageanleitung

Chicago Electric

Chicago Electric 3670 Bedienungsanleitung

Chicago Electric

Chicago Electric 96299 Bedienungsanleitung

Chicago Electric

Chicago Electric 45790 Bedienungsanleitung

Chicago Electric

Chicago Electric 69360 Installationshandbuch

Chicago Electric

Chicago Electric 60495 Montageanleitung

Chicago Electric

Chicago Electric 93632 Installationshandbuch

Chicago Electric

Chicago Electric HARBOR FREIGHT TOOLS 98544 Installationshandbuch

Chicago Electric

Chicago Electric 60495 Montageanleitung

Beliebte Bohren Handbücher anderer Marken

Makita

Makita BDF456 Bedienungsanleitung

Black & Decker

Black & Decker LDX220 Bedienungsanleitung

Hitachi

Hitachi DH 40MA Bedienungsanleitung

Challenge

Challenge JO Technisches Referenzhandbuch

Makita

Makita LXFD01 Bedienungsanleitung

Festool

Festool T18+3 Bedienungsanleitung

Milwaukee

Milwaukee M12 FPDX-202X Bedienungsanleitung

EINHELL

EINHELL TE-RH 32 E Bedienungsanleitung

Makita

Makita DHP484 Bedienungsanleitung

Makita

Makita FD05 Bedienungsanleitung

Bosch

Bosch PSB 530 RA Bedienungsanleitung

Maximum

Maximum 054-1359-4 Bedienungsanleitung

Makita

Makita HP332D Bedienungsanleitung

Raider

Raider RDP-HD31H Bedienungsanleitung

Bort

Bort BPM-1400x2 Bedienungsanleitung

Black & Decker

Black & Decker 7266 Bedienungsanleitung

KENT USA

KENT USA TRD1230 Bedienungsanleitung

Bosch

Bosch GSB 19-2 RE Bedienungsanleitung