Child Craft Wadsworth 31301 Bedienungsanleitung

AB20034_G1

AB20034_G2A

Assembled as a Crib

Assembled as a Toddler Bed.

Foundations®Worldwide, Inc.

5216 Portside Dr, Medina Oh 44256 USA • PH: 1 330.722.5033 • FAX: 1 330.722.5037

www.foundations.com

Wadsworth Full Size Convertible Crib

ASSEMBLY ASSISTANCE

IMPORTANT: retain for future reference read

carefully.

Foundations®strives for the highest quality in our

products but occasionally a missing part or problem

can occur during assembly.

If any parts are missing or broken or you need

assistance with assembly, DO NOT return the

product to your dealer. Go to our website at

www.foundations.com or Call Foundations®for

assistance at 1-877-716-2757 (U.S. Only) or

1-330-722-5033 (Monday through Friday, 9:00

a.m.– 4:00 p.m. Eastern Time). Please have the

model number and manufacture date available

when you call or write us at: Foundations®,

5216 Portside Dr., Medina Oh. 44256

KEEP INSTRUCTIONS FOR FUTURE USE.

Record the information for your product here:

Model number:

Manufacture date:

PO number:

Models Covered: 31301

•Adult assembly required.

• Read all instructions BEFORE assembly

and use.

• Unpack carton, remove packing materials,

including poly bag. Identify and check all parts.

ASSEMBLY INSTRUCTIONS

THIS IS THE ASSEMBLY INSTRUCTIONS FOR CRIBS SOLD IN THE UNITED STATES

FOR CUSTOMER SERVICE CALL

1-877-716-2757

(outside of U.S. 330-722-5033). DO NOT CALL

RETAILER OR RESELLER FOR SERVICE

AS THEY ARE NOT AUTHORIZED TO

RESOLVE ANY SERVICE ISSUES.

FOR FEDERAL SAFETY STANDARD

COMPLIANCE CERTIFICATES, PLEASE VISIT

OUR WEBSITE AT

www.foundations.com

AB20034E

A. 4mm Allen Wrench

B. 6mm x 80mm Allen Head Bolt

C. 6mm x 70mm Allen Head Bolt

D. 6mm x 60mm Allen Head Bolt

E. 6mm x 40mm Allen Head Bolt

F. 6mm x 25mm Allen Head Bolt

G. 6mm x 14mm Allen Head Bolt

H. Joint Connector 6mm Thread

I. 6mm Connector Nut

J. Stationary Side Assy (Back )

K. Long Foot Assy (Front)

L. Headboard Assy

M. Footboard Assy

N. Spring

O. Stationary Post Left (Back)

P. Stationary Post Right (Back)

Q. Foot Post Left (Front)

R. Foot Post Right (Front)

S. Stretcher Rail

T. Guard Rail Extender

U. Post Cap

AB20034_G3

EFG

Hardware Package

AB20034_G4A

Crib Parts

PARTS LIST

Part Description Part Number Quantity

11200070

11200324

11200332

11200326

11200362

11200327

11200328

11200330

11200331

22300977

22300980

22300983

22300984

11200364

22300986

22300987

22300988

22300989

22300985

22300316

22300990

PREPARATION

Carefully remove and lay out all hardware and parts.

Check quantities and match the parts list. Construct

Crib on an even at oor.

Note: during the assembly process whenever

using screws or bolts, Check each with the parts list

by letter and size identication. Place each screw

or bolt on the diagram of the item which is sketched

actual size. Be sure to use the proper size specied

in the assembly directions. If any parts are missing

or broken or you need assistance with assembly

DO NOT return your product to the dealer.

Please identify the Wadsworth crib by the model

number identication stamped on the inside face

of the Short Head or Short Foot Assemblies when

you call or write to Foundations®. Make note of all

identification numbers and include this information

with your request.

DO NOT Substitute Parts!

SUGGESTED TOOLS

#2 Medium Straight Screwdriver

Note:

Do Not discard spare parts as they may be used for

other congurations.

Figure 1

STEP 1

AB20034_G5

Opposite face of

P and O have

threaded inserts.

Attach Stationary Post Right (P) to Stationary Side

Assembly (J) using two (2) Allen Head Bolts (B) and

two (2) Joint Connectors (H) to attach post. Joint

Connector (H) will be installed in the back face of

the top rail and also the bottom edge of the bottom

rail on Stationary Side Assembly (J). Rotate Joint

Connector (H) as needed with a straight screwdriver

to align threads with Allen Head Bolts (B).

Repeat for Stationary Post Left (O).

Place Connector Nut (I) and Allen Bolt (G) in spare

hole at bottom. Fill two (2) holes in Stationary Post

Left (O) and Stationary Post Right (P).

Tighten all bolts securely.

See Figure 1.

STEP 2

Figure 2

AB20034_G6

Note the decorative

veinlines in this rail

and the intermediate

rail above. H

Install Dowel Pins

into receiving

holes in

underside of

this rail.

Opposite face

of Q and R have

threaded inserts.

Attach Foot Post Right (R) to Long Foot Assembly

(K) using two (2) Allen Head Bolts (B) and two (2)

Joint Connectors (H) to attach post. Joint Connector

(H) will be installed in the bottom edge of the

intermediate rail and also the bottom edge of the

bottom rail on Long Foot Assembly (K). Rotate Joint

Connector (H) as needed with a straight screwdriver

to align threads with Allen Head Bolts (B).

Repeat for Foot Post Left (Q).

Place Connector Nut (I) and Allen Bolt (G) in spare

hole at bottom. Fill two (2) holes in Foot Post Left

(Q) and Foot Post Right (R).

Tighten all bolts securely.

See Figure 2.

STEP 3

Figure 3

AB20034_G7

LAssembly

from Step 1.

Note: Warning labels

are on outside face

of L and M.

STEP 4

Figure 4

AB20034_G8

DView from bottom and

backside of crib.

Assemble Footboard Assembly (M) to Stationary

Side Assembly from Step 1. Use two (2) Allen Head

Bolts (E) which will be installed into their receiving

holes and then threaded into the metal threaded

insert in Stationary Post Right (P). Follow the same

procedure to attach Headboard Assembly (L) to the

opposite end of the Stationary Side Assembly from

Step 1 at Stationary Post Left (O).

Tighten all bolts securely.

See Figure 3.

Attach Stretcher Rail (S) between Headboard

Assembly (L) and Footboard Assembly (M) as

shown. A total four (4) Allen Head Bolts (D) and

four (4) Joint Connectors (H) will be required.

Joint Connectors (H) will be installed into receiving

holes in the back face of Stretcher Rail (S).

Rotate Joint Connector (H) as needed with a

straight screwdriver to align threads with Allen

Head Bolts (D).

Tighten all bolts.

See Figure 4.

STEP 5

Figure 5

AB20034_G9

Long Foot Assembly

from Step 2.

Assembly

from Step 4.

Metal threaded

inserts in face

of Q and R.

Attach Long Foot Assembly from Step 2 to the

assembly from Step 4. Use a total of four (4) Allen

Head Bolts (E) and follow the same process

described in Step 3 to attach the Headboard

Assembly (L) and Footboard Assembly (M) to

metal threaded inserts in Foot Post Left (Q)

and Foot Post Right (R).

See Figure 5.

Figure 6

AB20034_G10

STEP 6

Install Spring (N) with storage pouches on top into

assembled crib at height appropriate for intended

child (1, 2, 3).

Using Allen Bolts (G) and Connector Nuts (I) at

each corner of Spring, attach the mounting arms on

Spring (N) to the end rails on Headboard Assembly

(L) and Footboard Assembly (M). Allen Head Bolts

(G) will be installed through the hole in the mounting

arm and then into the receiving hole in Headboard

Assembly (L) and Footboard Assembly (M) while

Connector Nut (I) is installed through the outside

face of the receiving hole. Thread both Allen Bolts

(G) and Connector Nuts (I) together securely using

Allen Wrenches (A).

To adjust height of Spring (N), unthread Allen Head

Bolts (G) from Connector Nuts (I) at each corner of

Spring (N). Also remove Allen Head Bolts (G) and

described in Step 7) at the new selected height.

Move the Spring (N) to the new height location.

Then follow the same process described in this step

empty holes at the height where the Spring had

been located following the process described

in Step 7.

See Figure 6.

Figure 7

AB20034_G11

STEP 7

Fill all empty holes to prevent nger entrapment of

the child. There are a total of eight (8) empty holes

at the two (2) extra adjustment levels for Spring (N).

Use Allen Head Bolts (G) and Connector Nuts (I)

to ll each hole. Install as shown and thread them

together securely using Allen Wrenches (A).

There is also one (1) empty hole in Foot Post Left

(Q) and Foot Post Right (R) near the middle of each

post. That hole is for mounting of Guard Rail which

can be purchased when the Crib is converted to a

Toddler Bed. Use an Allen Head Bolt (E) and

Connector Nut (I) to ll each of these holes as

shown. Thread them together securely using Allen

Wrenches (A).

Before installing Mattress, see mattress size

requirements under “CAUTION” statement on

page 9. Also review all Warnings and Maintenance,

Cleaning and Storage on pages 9 and 10.

See Figure 7.

Conversion To A Toddler Bed

Figure 8

AB20034_G12A

This Crib can be converted to a Toddler Bed for

further use once it is no longer needed as a Crib.

This can be accomplished by removing Allen Head

Bolts (B) and Connector Nuts (H) which were

installed during Step 2 to assemble the Long Foot

Assembly section of the Crib. Once these are

removed, carefully remove the Long Foot Assembly

(K). Then ll all emply holes in Foot Post Left (Q)

and Foot Post Right (R) using Allen Head Bolts (E)

and Connector Nuts (I). Install in three (3) empty

holes in each Post as shown and thread securely

together with Allen Wrenches (A).

Also attach Post Cap (U) to top of Foot Post Left

(Q) and Foot Post Right (R) by aligning receiving

holes in bottom face of Post Cap (U) with dowel pins

in the top end of Foot Post Left (Q) and Foot Post

Right (R). Then install Allen Head Bolts (F) through

receiving hole in Post Cap (U) and thread into metal

threaded insert in top of Foot Post Left (Q) and

Foot Post Right (R). Tighten securely using Allen

Wrenches (A).

See Figure 8.

Review WARNINGS for Toddler Bed.

WARNING: INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT.

Openings in and between bed parts can entrap head and neck of a small child.

NEVER use bed with children younger than 15 months. ALWAYS follow assembly

instructions.

WARNING: STRANGULATION HAZARD: NEVER place bed near windows

where cords from blinds or drapes may strangle a child. NEVER suspend strings

over bed. NEVER place items with a string, cord or ribbon, such as hood strings

or pacifier cords, around a child’s neck. These items may catch on bed parts.

CAUTION: ENTRAPMENT HAZARD: To avoid dangerous gaps, any

mattress used in this bed shall be a full-sized crib mattress at least 51 5/8 in.

(1310 mm) in length, 27 1/4 in. (690 mm) in width, and 4 in. (100 mm) in thickness.

• The users maximum weight shall not be greater than 50 lbs. (22.7 kg).

• Mattress MUST be moved into lowest position for proper positioning.

• This crib contains all components necessary to convert to a toddler bed. However,

a guardrail may be available for purchase to provide additional security. Contact

Foundations®for assistance. Refer to maintenance section for contact

information.

WARNINGS (For Toddler Bed)

Conversion To A Full Size Bed

Figure 10

AB20034_G14

Bed Rail Kit

(purchased separately)

Long Foot Assembly

from Step 2.

Stationary Side Assembly

from Step 1.

The crib can be converted to a Full Size Bed with

the purchase of a Bed Rail and Slat Kit from

Foundations®.

Use Allen Head Bolts (C) and Joint Connectors (H)

from existing hardware. Save the Headboard

Assembly (L) and Footboard Assembly (M) (not

shown) for future use.

For further Full Size Bed configuration refer to

instructions with the Bed Rails and Slats.

See Figure 10.

Installing Guard Rail

Figure 9

AB20034_G13A

A Guard Rail can be purchased from Foundations®

added security.

Follow the directions supplied with the purchased

Guard Rail.

The Allen Head Bolts (E) and Connector Nuts (I)

which are at the location where the Guard Rail is to

be assembled will not be installed as explained in

the earlier section.

The addition of the Guard Rail Extenders (T)

included with this Crib and four (4) Allen Head Bolts

(B) also included, will be needed to attach the Guard

Rail. Use Joint Connector Nuts included with the

Guard Rail when installing Allen Head Bolts (B) to

the Guard Rail.

See Figure 9.

Please note that Bolts (D) installed during Step 4

of the crib assembly may need to be loosened

2-3 revolutions to allow extra space during this

process. And it may also be necessary to loosen

Bolt (G) which was threaded into Connector Nut (I)

while installing the Spring (N) during Step 6.

Please also note that only the (2) Bolts (G) and

Connector Nuts (I) on the front side of the crib where

the guard rail will be installed will need loosened.

Once the guard rail is completely installed, please

retighten any hardware items which were loosened.

Maintenance, Cleaning and Storage

MAINTENANCE:

Upon completion of the assembly, check to make sure all screws, bolts and connectors are tightened and

secure. Periodically check crib for damaged hardware, loose joints, missing parts or sharp edges before

and after assembly and frequently during use. DO NOT use crib if any parts are missing or broken.

If any parts are missing, broken or you need Assistance DO NOT return crib to your dealer. Call

Foundations® at 330.722.5033 and include model identication numbers recorded on page 1. DO NOT

substitute parts.

CLEANING:

Mix a mild solution of gentle dish washing soap and water, apply to surface using a clean cloth lightly

dampened in the solution. Rinse well with clear water using a soft clean cloth, then dry all surfaces with a

soft dry cloth. DO NOT use abrasive cleaners or any cleaners with harsh chemicals that would con-

tact a child’s skin, scouring pads, steel wool or coarse rags. This crib should be treated the same

as any ne furniture.

STORAGE:

When storing crib use Caution as extreme temperature or humidity changes could be harmful.

Use caution when a vaporizer is in use. Always aim vapor stream away from crib as well as away

from any wood furniture item.

After completing the assembly the user is advised to read and be aware of ALL WARNINGS,

CAUTIONS, CLEANING, STORAGE USE AND MAINTENANCE notices in these directions and

printed on the storage pouch on the crib spring. A printed pouch is attached to the crib spring

for the permanent storage of the assembly directions. Please place the complete set of

assembly directions into the pouch for future referral. We caution the user to Not place excess

hardware in the pouches as it could present danger to the child if retrieved.

CAUTION

•ANY MATTRESS USED IN THIS CRIB SHALL BE AT

LEAST 27 1/4 BY 51 5/8 IN. WITH A THICKNESS

NOT EXCEEDING 6 IN. IF YOUR CRIB IS

DESIGNED TO CONVERT TO A TODDLER BED,

THE MATTRESS MUST BE AT LEAST 4 IN.

(100 MM ) THICK.

• UPON COMPLETION OF ASSEMBLY BE SURE ALL SCREWS, BOLTS AND FASTENING DEVICES

HAVE BEEN TIGHTENED SECURELY. A FREQUENT CHECK SHOULD BE MADE OF ALL

SCREWS, BOLTS AND FASTENING DEVICES AND TIGHTEN IF NEEDED.

• Read all instructions before assembling crib. Keep instructions for future use. A

pouch is attached to the crib for permanent storage of the instructional literature.

• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on

their backs to sleep, unless otherwise advised by your physician.

• Strings can cause strangulation! DO NOT place items with a string around a child’s

neck, such as hood strings or pacifier cords. DO NOT suspend strings over a crib

or attach strings to toys.

• To help prevent strangulation, tighten all fasteners. A child can trap parts of the body or clothing

on loose fasteners.

• DO NOT place crib near window where cords from blinds or drapes may strangle a child.

•When child is able to pull to standing position, set mattress to lowest position and remove

bumper pads, large toys and other objects that could serve as steps for climbing out.

• Stop using crib when child begins to climb out or reaches the height of 35 in. (89 cm).

• After raising side, make sure latches are secure (if your unit has a movable side).

• DO NOT leave child in crib with side lowered. Be sure side is in raised and locked position

whenever child is in crib (if your crib has a moveable side).

• Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing

parts or sharp edges before and after assembly and frequently during use. Securely tighten bolts

and other fasteners. DO NOT use the crib if any parts are missing, damaged or broken. If any

parts are missing or broken or you need assistance with assembly, DO NOT return the product to

your dealer. Call Foundations® for assistance at 1 877.716.2757 (U.S. Only) or 1 330.722.5033 for

replacement parts and instructional literature if needed. Include model identication numbers

recorded on page 1 with your request. DO NOT substitute parts.

• Replace teething rail(s) if damaged, cracked or loose (if equipped with teething rails).

• If renishing use a non-toxic nish specied for children’s products.

• Follow warnings on all products in a crib.

• NEVER use plastic shipping bags or other plastic lm as mattress covers because they can

cause suffocation.

• Infants can suffocate in gaps between crib sides and a mattress that is too small.

• DO NOT use a water mattress with this crib.

• When disassembling this crib, DO NOT remove any item attached with wood screws.

Meets CSPC

Safety Requirements

5216 Portside Dr.

Medina Ohio 44256 USA

Telephone: 330.722.5033

Fax: 330.722.5037

www.child-craft.com

www.foundations.com

WARNING:Infants can suffocate on soft bedding. NEVER add a pillow

or comforter. NEVER place additional padding under an infant.

FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS COULD RESULT

IN SERIOUS INJURY OR DEATH.

WARNINGS

Inhaltsverzeichnis

Andere Child Craft Baby- und Kleinkindmöbel Handbücher

Child Craft

Child Craft Parisian Full Size Wood Crib F12301 Bedienungsanleitung

Child Craft

Child Craft Kieran F33201 Bedienungsanleitung

Child Craft

Child Craft Redmond F32801 Bedienungsanleitung

Child Craft

Child Craft Delaney F01616 Bedienungsanleitung

Child Craft

Child Craft Long Beach F22101 Bedienungsanleitung

Child Craft

Child Craft SINGLE DROPSIDE CRIB Bedienungsanleitung

Child Craft

Child Craft F02316 Bedienungsanleitung

Child Craft

Child Craft Wynwood F11501 Bedienungsanleitung

Child Craft

Child Craft LEGACY SINGLE DROPSIDE CRIB WITH DRAWER Bedienungsanleitung

Child Craft

Child Craft Jordyn F05432 Bedienungsanleitung

Child Craft

Child Craft Westgate F38201 Bedienungsanleitung

Child Craft

Child Craft Tremont F44501 Bedienungsanleitung

Child Craft

Child Craft Surrey Hill F37001 Bedienungsanleitung

Child Craft

Child Craft Legacy Crib Bedienungsanleitung

Child Craft

Child Craft F99106.26 Bedienungsanleitung

Child Craft

Child Craft CRIB N BED W/ DECORATIVE ENDS Bedienungsanleitung

Child Craft

Child Craft 1216 Bedienungsanleitung

Child Craft

Child Craft Crib'N'Double Bed Bedienungsanleitung

Child Craft

Child Craft Forever Eclectic F49101 Bedienungsanleitung

Child Craft

Child Craft Monterey F10391 Bedienungsanleitung

Child Craft

Child Craft Penelope F36901 Bedienungsanleitung

Child Craft

Child Craft Orbit Euro F10201 Bedienungsanleitung

Child Craft

Child Craft 15061 Bedienungsanleitung

Child Craft

Child Craft F21401 Bedienungsanleitung

Beliebte Baby- und Kleinkindmöbel Handbücher anderer Marken

Mocka

Mocka Learning Tower Bedienungsanleitung

VERTBAUDET

VERTBAUDET 62003-2789 Bedienungsanleitung

Summer

Summer MY FUN POTTY Bedienungsanleitung

Grotime

Grotime Changeover Bedienungsanleitung

Fillikid

Fillikid 1221 Bedienungsanleitung

Relita

Relita loft bed ALEX Bedienungsanleitung

Joovy

Joovy Qool Bedienungsanleitung

KidKraft

KidKraft Step n Store Bedienungsanleitung

Fisher-Price

Fisher-Price L4889 Bedienungsanleitung

Germania

Germania Moon 4048.101 Bedienungsanleitung

BabyGo

BabyGo Amila Bedienungsanleitung

Fisher-Price

Fisher-Price CBV06 Bedienungsanleitung

Fisher-Price

Fisher-Price H4790 Bedienungsanleitung

Graco

Graco Dream Suite Bedienungsanleitung

Delta Childrens Products

Delta Childrens Products BB87116CR Bedienungsanleitung

Costway

Costway BB5591 Bedienungsanleitung

SAUTHON

SAUTHON UP CHENE DORE UI101A Bedienungsanleitung

Delta Children

Delta Children Classic Bedienungsanleitung