Child Craft Parisian Full Size Wood Crib F12301 Bedienungsanleitung

AB20060E

AB20047_G1

Assembled as Crib

AB20060_G13

Assembled as Toddler Bed

Foundations®Worldwide, Inc.

5216 Portside Dr, Medina Oh 44256 USA • PH: 1 330.722.5033 • FAX: 1 330.722.5037

www.childcraftbaby.com

Parisian Full Size Wood Crib

ASSEMBLY ASSISTANCE

IMPORTANT: retain for future reference read

carefully.

Foundations®strives for the highest quality in our

products but occasionally a missing part or problem

can occur during assembly.

If any parts are missing or broken or you need

assistance with assembly, DO NOT return the

product to your dealer. Go to our website at

www.childcraftbaby.com or Call Foundations®

for assistance at 1-877-716-2757 (U.S. Only) or

1-330-722-5033 (Monday through Friday, 9:00

a.m.– 4:00 p.m. Eastern Time). Please have the

model number and manufacture date available

when you call or write us at:

Foundations®, 5216 Portside Dr. Medina Oh. 44256

KEEP INSTRUCTIONS FOR FUTURE USE

FOR CUSTOMER SERVICE CALL

1-877-716-2757

(outside of U.S. 330-722-5033). DO NOT CALL

RETAILER OR RESELLER FOR SERVICE

AS THEY ARE NOT AUTHORIZED TO

RESOLVE ANY SERVICE ISSUES.

FOR FEDERAL SAFETY STANDARD

COMPLIANCE CERTIFICATES, PLEASE VISIT

OUR WEBSITE AT

www.childcraftbaby.com

Record the information for your product here:

Model number:

Manufacture date:

PO number:

Models Covered: F12301

• Adult assembly required.

• Read all instructions BEFORE assembly and USE

of product.

• Unpack carton, remove packing materials,

including poly bag. Identify and check all parts.

ASSEMBLY INSTRUCTIONS

THIS IS THE ASSEMBLY INSTRUCTIONS FOR CRIBS SOLD IN THE UNITED STATES

A. Stationary Side Assembly

B. Foot Post - Left

C. Foot Post - Right

D. Head Post - Left

E. Head Post - Right

F. Head Assembly

G. Foot Assembly

H. Stretcher

I. Foot/Head Top Rail

J. Spring

K. 6mm x 80mm Allen Head Bolt

L. 6mm x 35mm Allen Head Bolt

M. 6mm x 14mm Allen Head Bolt

N. 6mm Joint Connector Nut

O. 6mm Connector Nut

P. 4mm Allen Wrench

Hardware Package

AB20060_G3

Crib Parts

PARTS LIST

Part Description Part Number Quantity

22301103

22301090

22301092

22301094

22301096

22301108

22301097

22301102

22301107

11200333

11200324

11200325

11200328

11200330

11200331

11200070

PREPARATION

Carefully remove and lay out all hardware and parts.

Check quantities and match the parts list.

Construct Crib on an even at oor.

Note: during the assembly process whenever

using screws or bolts, Check each with the parts list

by letter and size identication. Place each screw

or bolt on the diagram of the item which is sketched

actual size. Be sure to use the proper size specied

in the assembly directions. If any parts are missing

or broken or you need assistance with assembly

The Allen Head Bolts (M) have a friction enhancing

patch on the thread which may cause resistance

during tightening.

DO NOT return your product to the dealer.

Please identify the crib by the model number

identication stamped on the inside face of the

Stationary side assembly when you call or write to

Foundations®. Make note of all identification

numbers and include this information with your

request.

DO NOT Substitute Parts!

SUGGESTED TOOLS

#2 Medium Straight Screwdriver

AB20060_G2

B C D E

Figure 1

STEP 1

AB20060_G4

STEP 2

Construct End Panel Assemblies:

Align Head Post Left (D) onto dowel on Head

Assembly (F) bottom rail and push together.

Insert Allen Head Bolts (L) into Foot Post and snug

with Allen wrench.

Insert Top Rail ( I ) into groove on top of Head

Assembly (F). Align hole and dowel in Top rail

( I ) with Head Post Left (D) and insert Allen bolts (L)

and snug with Allen Wrench.

Align Head Post Right (E) onto dowel on Head

Assembly (F) bottom rail and dowel on Top rail (I)

and push together.

Insert Allen Head Bolts (L) into Head Post Right

and snug with Allen wrench.

Tighten all bolts securely.

See gure 1

Repeat procedure with Foot Assembly (G), using

Foot Post Left (B) and Foot post Right (C)

Figure 2

AB20060_G5

Attach Stationary Side Assembly to Head Assembly:

Place Joint Connector Nuts (N) into holes in the

top and bottom rail of Stationary Side Assembly (A).

Align head assembly (F) with Stationary Side

Assembly (A) Insert Allen Head Bolts (K) into Head

Post Right (E) and Rotate Joint Connectors Nuts to

align threads with bolts and snug with Allen wrench.

Tighten all bolts securely.

See gure 2.

Figure 3

STEP 3

STEP 4

Figure 4

AB20060_G7

Attach Stationary Side Assembly to Foot Assembly:

Place Joint Connector Nuts (N) into holes in the

top and bottom rail of Stationary Side Assembly (A).

Align Foot Assembly (G) with Stationary Side

Assembly (A) Insert Allen Head Bolts (K) into Foot

Post Right (C) and Rotate Joint Connectors Nuts to

align threads with bolts and snug with Allen wrench.

Tighten all bolts securely.

See gure 3.

Assemble Stretcher to crib.

Insert Joint Connector Nuts (N) into Stretcher (H) .

Align and insert tenons on end of stretcher into

slotted holes in Finished End panels (F) and (G).

Insert Allen Head Bolts (K) into Finished End Panels

(F) and (G) . Rotate Joint Connectors Nuts to align

threads with bolts and loosely tighten with Allen

wrench.

Do Not tighten bolts securely until end of step 5.

See gure 4.

AB20060_G6

Figure 5

STEP 5

Assemble Front Stationary Side to crib.

Insert Joint Connector Nuts (N) into Front Stationary

Side (A) .

Insert Allen Head Bolts (K) into Finished End Panels

(F) and (G) Rotate Joint Connectors Nuts (N) to

align threads with bolts and snug with Allen wrench.

Tighten all bolts securely including Bolts (K) at

stretcher which were not fully tightened during

step 4

See gure 5

AB20060_G8

AB20060_G9

Figure 6

STEP 6

Add Mattress Spring to crib.

There are 3 positions for the Spring (J) shown as

(1), (2 ) and (3). Refer to warning section to

determine appropriate height for the intended child.

The position must be the same as for all the

brackets attached to the crib.

Note: Pouches containing warnings and instructions

face up on top surface of Spring.

Position tabs on Spring at approximately a 45

degree angle. The Spring (J) is lowered into the crib.

Take care not to scratch the wood with the metal

spring. Align the Spring Brackets with the holes in

the crib at the desired height. Insert Bolt (M) into

hole in spring brackets from inside of crib then

through correct height hole in the crib.

Tighten all bolts securely with Allen wrenches.

To Adjust height of Spring (J) remove bolts (M).

Then relocate Spring (J) to new height adjustment

level and install Bolts (M) as described in previous

paragraph.

See gure 6.

TODDLER BED

Figure 7

AB20060_G10

Toddler bed conversion:

Follow assembly instructions up to and including

installation of Stretcher (H) shown in Step 4.

Spring (J) should be assembled and installed in the

lowest position as shown in Step 6.

If the Front Stationary Side (A) is in place it must

be removed. Save the hardware and side for future

possible use.

Holes remaining from the Removal of the Front

Stationary Side (A) must be lled with hardware to

prevent nger entrapment.

Insert Connector Nuts (O) into Inside of posts.

Insert Allen head Bolts (L) into outside of posts and

tighten securely.

Check Stretcher hardware to conrm they are

tightened securely.

See gure 7.

Finishing Touches

Place a purchased full sized mattress on the spring.

After completing the crib assembly, and after

making yourself aware of WARNINGS, CAUTIONS,

CLEANING,STORAGE,USE and MAINTENANCE

of crib on page 8 and 9. Store the assembly

directions in the pouch which was pre-attached to

the spring. For future referral to assembly directions

you will only need to remove them from the pouch.

We caution you not to store excess hardware in

pouch as this would be a danger to child if retrieved

by him/her.

AB20060_G12

WARNINGS (For Toddler Bed)

WARNING:INFANTS HAVE DIED IN TODDLER BEDS FROM

ENTRAPMENT. Openings in and between bed parts can entrap head and neck of a

small child. NEVER use bed with children younger than 15 months. ALWAYS follow

assembly instructions.

WARNING:STRANGULATION HAZARD: NEVER place bed near windows

where cords from blinds or drapes may strangle a child. NEVER suspend strings

over bed. NEVER place items with a string, cord or ribbon, such as hood strings or

pacifier cords, around a child’s neck. These items may catch on bed parts.

CAUTION:ENTRAPMENT HAZARD: To avoid dangerous gaps, any

mattress used in this bed shall be a full-sized crib mattress at least 51 5/8 in. (1310

mm) in length, 27 1/4 in. (690 mm) in width, and 4 in. (100 mm) in thickness.

• The users maximum weight shall not be greater than 50 lbs. (22.7 kg).

• Mattress MUST be moved into lowest position for proper positioning.

•This crib contains all components necessary to convert to a toddler bed. However,

a guardrail may be available for purchase to provide additional security. Contact

Foundations® for assistance. Refer to maintenance section for contact

information.

WARNINGS (For Toddler Bed)

Guard Rail Option and Installation

For added security, a guard rail can be purchased

for this crib. Contact Foundations® or your dealer.

Note: If the front Stationary Side Assembly and

Stretcher has been installed they must be removed.

Hardware must be retained and required to install

guard Rail.

Note: Allen Head Bolts (K) must be retained and

required to install guard Rail.

Keep All parts and these instructions for

Further use and reference.

General guard rail instructions will be included

in the guard rail kit.

Prior to attaching Guard Rail install Allen Head Bolt

(L) into the hole as shown and thread into

Connector Nut (O) installed in the same hole on the

opposite face of Post (B).

Repeat for post (D).

Tighten all bolts securely.

See gure 8.

After the blank holes have been lled from the

above procedure, refer to the Guard Rail installation

instructions provided with the Guard Rail to install to

crib.

AB20060_G11

Figure 8

Maintenance Cleaning and Storage

MAINTENANCE:

Upon completion of the assembly, check to make sure all screws, bolts and connectors are tightened and

secure.

Periodically check crib for damaged hardware, loose joints, missing parts or sharp edges before and after

assembly and frequently during use.

DO NOT use crib if any parts are missing or broken.

If any parts are missing, broken or you need Assistance DO NOT return crib to your dealer.

Call Foundations® at 330.722.5033 and include model identication numbers recorded on page 1.

DO NOT substitute parts.

CLEANING:

Mix a mild solution of gentle dishwashing soap and water, apply to surface using a clean cloth lightly

dampened in the solution. Rinse well with clear water using a soft clean cloth, then dry all surfaces with a

soft dry cloth.

DO NOT use abrasive cleaners or any cleaners with harsh chemicals that would contact a child’s

skin, scouring pads, steel wool or coarse rags. This crib should be treated the same as any ne

furniture.

STORAGE:

When storing crib use Caution as extreme temperature or humidity changes could be harmful.

Use caution when a vaporizer is in use. Always aim vapor stream away from crib as well as away

from any wood furniture item.

After completing the assembly the user is advised to read and be aware of

ALL WARNINGS, CAUTIONS, CLEANING, STORAGE USE AND MAINTENANCE notices in these

directions and printed on the storage pouch on the crib spring. A printed pouch is attached to the

crib spring for the permanent storage of the assembly directions. Please place the complete set of

assembly directions into the pouch for future referral. We caution the user to Not place excess

hardware in the pouches as it could present danger to the child if retrieved.

CAUTION

•ANY MATTRESS USED IN THIS CRIB SHALL BE AT LEAST

27 1/4 BY 51 5/8 IN. WITH A THICKNESS NOT EXCEEDING

6 IN. IF YOUR CRIB IS DESIGNED TO CONVERT TO A

TODDLER BED, THE MATTRESS MUST BE AT LEAST 4 IN.

(100 MM ) THICK.

• UPON COMPLETION OF ASSEMBLY BE SURE ALL SCREWS, BOLTS AND

FASTENING DEVICES HAVE BEEN TIGHTENED SECURELY. A FREQUENT CHECK

SHOULD BE MADE OF ALL SCREWS, BOLTS AND FASTENING DEVICES AND

TIGHTEN IF NEEDED.

• Read all instructions before assembling crib. Keep instructions for future use. A

pouch is attached to the crib for permanent storage of the instructional literature.

• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on

their backs to sleep, unless otherwise advised by your physician.

• Strings can cause strangulation! DO NOT place items with a string around a child’s

neck, such as hood strings or pacifier cords. DO NOT suspend strings over a crib

or attach strings to toys.

• To help prevent strangulation, tighten all fasteners. A child can trap parts of the body or clothing

on loose fasteners.

• DO NOT place crib near window where cords from blinds or drapes may strangle a child.

•When child is able to pull to standing position, set mattress to lowest position and remove

bumper pads, large toys and other objects that could serve as steps for climbing out.

• Stop using crib when child begins to climb out or reaches the height of 35 in. (89 cm).

• After raising side, make sure latches are secure (if your unit has a movable side).

• DO NOT leave child in crib with side lowered. Be sure side is in raised and locked position

whenever child is in crib (if your crib has a moveable side).

• Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing

parts or sharp edges before and after assembly and frequently during use. Securely tighten bolts

and other fasteners. DO NOT use the crib if any parts are missing, damaged or broken. If any

parts are missing or broken or you need assistance with assembly, DO NOT return the product to

your dealer. Call Foundations® for assistance at 1 877.716.2757 (U.S. Only) or +1 330.722.5033 for

replacement parts and instructional literature if needed. Include model identication numbers

recorded on page 1 with your request. DO NOT substitue parts.

• Replace teething rail(s) if damaged, cracked or loose (if equipped with teething rails).

• If renishing use a non-toxic nish specied for children’s products.

• Follow warnings on all products in a crib.

• NEVER use plastic shipping bags or other plastic lm as mattress covers because they can

cause suffocation.

• Infants can suffocate in gaps between crib sides and a mattress that is too small.

• DO NOT use a water mattress with this crib.

• When disassembling this crib, DO NOT remove any item attached with wood screws.

Meets CPSC

Safety Requirements

5216 Portside Dr.

Medina Ohio 44256 USA

Telephone: 330.722.5033

Fax: 330.722.5037

www.childcraftbaby.com

WARNING: Infants can suffocate on soft bedding. NEVER add a pillow

or comforter. NEVER place additional padding under an infant.

FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS COULD RESULT

IN SERIOUS INJURY OR DEATH.

Inhaltsverzeichnis

Andere Child Craft Baby- und Kleinkindmöbel Handbücher

Child Craft

Child Craft Kieran F33201 Bedienungsanleitung

Child Craft

Child Craft Long Beach F22101 Bedienungsanleitung

Child Craft

Child Craft Forte Flat Top Crib F34301 Bedienungsanleitung

Child Craft

Child Craft Penelope F36901 Bedienungsanleitung

Child Craft

Child Craft Jordyn F05419 Bedienungsanleitung

Child Craft

Child Craft Wadsworth 31301 Bedienungsanleitung

Child Craft

Child Craft DOUBLE DROPSIDE CRIB Bedienungsanleitung

Child Craft

Child Craft Kieran F13201 Bedienungsanleitung

Child Craft

Child Craft Crib'n'Double Bed 34801 Firmware-Update

Child Craft

Child Craft Westgate F38201 Bedienungsanleitung

Child Craft

Child Craft Legacy Crib Bedienungsanleitung

Child Craft

Child Craft Jordyn F05432 Bedienungsanleitung

Child Craft

Child Craft Denman F33601 Bedienungsanleitung

Child Craft

Child Craft Orbit Euro F10201 Bedienungsanleitung

Child Craft

Child Craft Lucas F36701 Bedienungsanleitung

Child Craft

Child Craft Atwood F11801 Bedienungsanleitung

Child Craft

Child Craft Soho Flat Top Convertible Crib F33901 Bedienungsanleitung

Child Craft

Child Craft Delaney F31601 Bedienungsanleitung

Child Craft

Child Craft CRIB N BED W/ DECORATIVE ENDS Bedienungsanleitung

Child Craft

Child Craft CONVERTS TO TODDLER BED AND FULL SIZE HEADBOARD AND... Bedienungsanleitung

Child Craft

Child Craft Tremont F44501 Bedienungsanleitung

Child Craft

Child Craft Forever Eclectic F49101 Bedienungsanleitung

Child Craft

Child Craft Lucas F06709 Bedienungsanleitung

Child Craft

Child Craft Wynwood F11501 Bedienungsanleitung

Beliebte Baby- und Kleinkindmöbel Handbücher anderer Marken

Mocka

Mocka Learning Tower Bedienungsanleitung

VERTBAUDET

VERTBAUDET 62003-2789 Bedienungsanleitung

Summer

Summer MY FUN POTTY Bedienungsanleitung

Grotime

Grotime Changeover Bedienungsanleitung

Fillikid

Fillikid 1221 Bedienungsanleitung

Relita

Relita loft bed ALEX Bedienungsanleitung

Joovy

Joovy Qool Bedienungsanleitung

KidKraft

KidKraft Step n Store Bedienungsanleitung

Fisher-Price

Fisher-Price L4889 Bedienungsanleitung

Germania

Germania Moon 4048.101 Bedienungsanleitung

BabyGo

BabyGo Amila Bedienungsanleitung

Fisher-Price

Fisher-Price CBV06 Bedienungsanleitung

Fisher-Price

Fisher-Price H4790 Bedienungsanleitung

Graco

Graco Dream Suite Bedienungsanleitung

Delta Childrens Products

Delta Childrens Products BB87116CR Bedienungsanleitung

Costway

Costway BB5591 Bedienungsanleitung

SAUTHON

SAUTHON UP CHENE DORE UI101A Bedienungsanleitung

Delta Children

Delta Children Classic Bedienungsanleitung