KOKEN LM-110 Bedienungsanleitung

Gynecological

Examination

Simulator

LM-110

Instruction Manual

Thank you for purchasing the Gynecological Examination Simulator.

Please read this instruction manual carefully to ensure correct use of the product,

and store it in a safe place for easy access.

KOKEN CO., LTD.

1-4-14 Koraku, Bunkyo-ku, Tokyo 112-0004 JAPAN

URL:http://www.kokenmpc.co.jp

E-mail:[email protected]

Handling and Safety Precautions

These precautions should be strictly observed in order to ensure safe,

long-term use of the product.

The following precautions should be observed particularly strictly:

1. This model is made from special materials so that it closely resembles the feel of a living body,

so please handle this product gently as you would do so with a living body. Applying excessive

force, such as by pulling or dropping the model, can damage the product.

2. The materials of this model have a distinct odor. It is not harmful to the human body, and does

not a󱐯ect the product’s quality. The distinct odor will recede over time. Since the product is

coated with baby powder during manufacturing, there may be a trace smell of baby powder.

3. Please use glycerin as a lubricant. Please apply some glycerin before use during a practical. The

manufacturer is not liable for product deterioration or damage caused by the use of lubricant

other than glycerin.

*This product does not come with glycerin. Please purchase glycerin separately.

4. Please do not use oily lubricant (baby oil, olive oil etc.), alcohol lubricant, and lubricant containing

organic solvent. These may cause breakage of the model.

5. In caring for the model, do not use rubbing alcohol, thinners, or benzin or other organic solvents

on the model, as doing so may cause damage.

6. Never draw on the model with oil-based ink, pencil, chalk, or paint as it will stain the product

permanently.

7. Placing an object directly on the product or placing the product on an uneven surface may

change the shape of the product.

8. If the model was cleaned with water to reduce stickiness or after use in a practical, apply baby

powder over the entire model to reduce friction.

9. The genital unit may change shape over long-term use. Please check after about 3 years from

purchase. If the changed shape a󱐯ects the functioning of the model, please consider replacing

the genital unit.

10. There may be air bubbles or patterns on the model created during manufacturing. It will not

a󱐯ect the strength of the model, as it is made from a material that is resistant to tearing.

1. The contents of this instruction manual are subject to change without notice.

2. This instruction manual may not be reproduced in part or in its entirety without permission.

3. Please contact the manufacturer in the event that any errors or omissions are found in the contents of

this instruction manual.

4. This product should be used only as described in this instruction manual. In particular, the product

should not be used in any way that contravenes the precautions noted in the instruction manual.

11. The model may warp if stored in a very cold or very hot environment for an extended period

of time. The materials may also deteriorate, warp, or discolor if exposed to direct sunlight or UV.

Please store the product in an environment with a temperature of 0°C to 50°C, away from

direct sunlight and UV.

12. Please wear disposable gloves during a practical.

13. Please beware that the ovarian cysts and the hydrosalpinx may rupture if pumped with too

much air.

14. This product is intended for use in standard operating environments. Do not use it in heavy

industrial settings.

15. This model uses urethane foam for some of its parts, and may be susceptible to damage from

pests that are attracted to urethane foam (such as insects in the ant family).

When storing this model, ensure that thorough measures are taken to prevent pest damage

before storing. The company will not be involved with or held liable for pest damage that occurs

during storage.

16. There may be some indentations on the bottom or sides (i.e. the surfaces that make contact with

the main body) of the genital unit (see photograph below). However, they will not a󱐯ect the

product's quality or function. This is an unavoidable result of the characteristics of the material

used on these surfaces.

Table of Contents

1. Outline and characteristics

2. Structure and components

3. Handling instructions

3-1. Instructions for use

3-2. Adjustment of ovarian cysts and hydrosalpinx

3-3. Possible examinations and procedures

3-4. Removal of the genital unit

4. Care instructions

5. Specications

1. Outline and characteristics

Outline

This model enables practical training in basic gynecological examination. It is best suited for the

education of doctors-in-training and medical students, including general practice.

Characteristics

1. Soft, special material used for the external genital piece and abdominal piece impart a feel

to the model during bimanual examination (internal and external examination) and rectal

examination that closely resembles that of a living body.

2. All uteri are right-and-left adjustable, which enables the product to recreate realistic

examination of conditions such as cervical motion tenderness.

3. Internal reproductive organs such as the uterus and ovaries have normal and abnormal

states and the examination of their respective disease states (intramuscularis hysteromyoma,

subserous myoma, ovarian cyst, hydrosalpinx, etc.) can be practiced by changing the uterus.

The uterus can be changed easily.

4. The size of ovarian cysts and hydrosalpinx can be adjusted by pumping in air to achieve the

size and texture that closely resembles a living body.

5. The product can be used for the practical training of vaginoscopy, probing, and cytology

such as collection of intimal smears.

6. The genital unit can be detached easily for simple care and replacement.

2. Structure and components

Component Number of component

Main body 1

Genital unit 1

Fixing screw 2

Normal uterus 1

Early pregnancy uterus 1

Hysteromyoma 1 (in tunica muscularis) 1

Hysteromyoma 2 (under endometrium) 1

Ovarian cyst 1 (ping-pong ball size) 1

Ovarian cyst 2 (tennis ball size) 1

Hydrosalpinx 1

Air pump 1

Storage case 1

Abdominal wall protective sheet 1

Baby powder 1

Instruction Manual (this document) 1

①

②

③

④

⑤

⑥

⑦

⑧

⑨

⑩

⑪

⑫

⑬

⑭

3. Handling instructions

3-1. Instructions for use

1. Remove the abdominal wall protective sheet from the storage case, and take out the main

body.

*If the genital unit feels sticky, apply the enclosed baby powder over the entire surface.

2. Peel open the abdominal wall

3. Apply glycerin to the hole for attaching the uterus

Storage case

Abdominal wall

protective sheet

4. Apply glycerin to the stopper ring on the uterus

5. Insert the uterus into the hole for attaching the uterus.

*On the inside of the hole for attaching the uterus is a groove into which the stopper ring will

t. Insert the uterus so that the stopper ring ts into this groove.

Picture is of the

normal uterus

Stopper ring

Cross section of the insertion site

Set correctly

Insert the ovaries of the normal uterus into

their respective compartments as shown

in the photograph.

*When practicing with a diseased uterus,

use without inserting the ovaries into their

compartments.

External

genitals

Uterus

6. Cover the main body with the abdominal wall and secure it with the hook and loop fasteners.

7. When removing the uterus, pull it out of the hole for attaching the uterus.

○ Do this also when changing to another uterus.

3-2 Adjustment of ovarian cysts and hydrosalpinx

○ The size of the ovarian cysts and the hydrosalpinx can be adjusted by injecting air with the

air pump.

1. Insert the ovarian cyst or hydrosalpinx uterus into the hole for attaching the uterus, and

attach the air pump connector to the straight stopcock.

*If the abdominal wall around the ilium is

not aligned properly, adjust to align it.

The straight stopcock is combined with

a luer-lock style connector. Attach and

turn to connect the air pump.

2. Open the handle on the straight stopcock and close the air pump valve before pumping in air.

*If you want to reduce the amount of air, loosen the air pump valve to release the air.

*Beware that pumping in too much air may cause the uterus to rupture.

3. Once the amount of air has been adjusted, close the handle on the straight stopcock and

detach the air pump connector.

4. Lay the straight stopcock on the underside of the uterus so it does not get in the way of the

examination.

Open

Detach

Inhaltsverzeichnis

Andere KOKEN Produkt zur naturwissenschaftlichen Bildung Handbücher

KOKEN

KOKEN LM-092 Bedienungsanleitung

KOKEN

KOKEN LM-101B Bedienungsanleitung

KOKEN

KOKEN LM-055 Bedienungsanleitung

KOKEN

KOKEN LM-103 Bedienungsanleitung

KOKEN

KOKEN LM-078 Bedienungsanleitung

KOKEN

KOKEN LM-074 Bedienungsanleitung

KOKEN

KOKEN LM-114H-CE Bedienungsanleitung

KOKEN

KOKEN LM-107A Bedienungsanleitung

KOKEN

KOKEN LM-026M Bedienungsanleitung

KOKEN

KOKEN Colonoscopy Lower GI Endoscopy Simulator Type... Bedienungsanleitung

KOKEN

KOKEN LM-101D Bedienungsanleitung

KOKEN

KOKEN Western Features Baby Bedienungsanleitung

KOKEN

KOKEN LM-104 Bedienungsanleitung

KOKEN

KOKEN LM-060 Bedienungsanleitung

KOKEN

KOKEN LM-094B Bedienungsanleitung

KOKEN

KOKEN LM-095N Bedienungsanleitung

KOKEN

KOKEN LM-101K Bedienungsanleitung

KOKEN

KOKEN LM-068 Bedienungsanleitung

KOKEN

KOKEN LM-089 Bedienungsanleitung

KOKEN

KOKEN LM-017 Bedienungsanleitung

KOKEN

KOKEN LM-024 Bedienungsanleitung

KOKEN

KOKEN LM-025 Bedienungsanleitung

KOKEN

KOKEN LM030 Bedienungsanleitung

KOKEN

KOKEN LM-109M Bedienungsanleitung

Beliebte Produkt zur naturwissenschaftlichen Bildung Handbücher anderer Marken

PASCO

PASCO ES-9080B Bedienungsanleitung

ARBOR SCIENTIFIC

ARBOR SCIENTIFIC 93-3501 Bedienungsanleitung

Alga Science

Alga Science SOLAREXPLORER Bedienungsanleitung

HAKUBUN

HAKUBUN magnet SA Bedienungsanleitung

Aurora

Aurora Plasma Globe Bedienungsanleitung

Dentsply Sirona

Dentsply Sirona Sim Multi Bench Bedienungsanleitung

Circuitmess

Circuitmess CircuitPet Bedienungsanleitung

PASCO

PASCO ME-7018 Bedienungsanleitung

laerdal

laerdal SimBaby Bedienungsanleitung

Einstein

Einstein LabMate+ Bedienungsanleitung

Limbs & Things

Limbs & Things PROMPT FLEX STANDARD Bedienungsanleitung

Horizon Educational

Horizon Educational EDUSTAK JUNIOR Bedienungsanleitung

FUTABA

FUTABA GYC441 Bedienungsanleitung

KMART

KMART Volcano Bedienungsanleitung

Bresser

Bresser Discovery 3-in-1 MicroViewer Bedienungsanleitung

Limbs & Things

Limbs & Things 61141 Bedienungsanleitung

PASCO

PASCO ME-9885A Bedienungsanleitung

BT BT-CSIS Bedienungsanleitung