Cisco Network Convergence System 6000 Fabric Card... Handbuch

Cisco Network Convergence System 6000 Fabric Card Chassis

Hardware Installation Guide

First Published: 2014-07-24

Last Modified: 2018-03-30

Americas Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

http://www.cisco.com

Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 527-0883

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS,

INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND,

EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH

THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY,

CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB's public domain version

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS" WITH ALL FAULTS.

CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT

LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS

HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network

topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional

and coincidental.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https:/

/www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership

relationship between Cisco and any other company. (1721R)

CONTENTS

Preface

Preface xi

Audience xi

Documentation Conventions xi

Related Documentation xiii

Changes to This Document xiii

Obtaining Documentation and Submitting a Service Request xiii

CHAPTER 1

Installation Roadmap 1

CHAPTER 2

Overview 3

About the Cisco NCS 6000 Fabric Card Chassis 3

Fabric Card Chassis Components 4

Slot Numbers 8

Cable Management 10

Safety Guidelines 10

CHAPTER 3

Installing the Power Enclosure, Power Trays, and Exterior Cosmetics 13

About the Power Enclosure 13

Installing the Power Enclosure 14

Required Tools and Equipment 14

Steps 15

Installing the Power Trays 16

About the AC and DC Power Trays 16

Installing an AC or DC Power Tray 18

Prerequisites 18

Required Tools and Equipment 19

Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide

iii

Steps 19

Installing the Exterior Cosmetics 20

Overview of the Exterior Cosmetics 21

Installing the Front Exterior Cosmetics 22

Prerequisites 23

Required Tools and Equipment 23

Steps 23

Installing the Rear Exterior Cosmetics 28

Prerequisites 28

Required Tools and Equipment 28

Steps 28

CHAPTER 4

Installing the Power Components 35

Power System Overview 35

Prerequisites 35

Installing the Fabric Card Chassis Ground Cable 35

Required Tools and Equipment 36

Steps 38

AC Power System 39

Overview of the AC Power System 39

Installing an AC Power Distribution Unit 39

Mounting the PDU 40

Installing the Tie-Down Bar 42

DC Power System 43

Installing the Power Modules and Input Power Cables 45

Installing an AC or DC Power Module 46

Prerequisites 48

Required Tools and Equipment 48

Steps 49

About the Power Module Status Indicators 50

Installing an AC or DC Power Module Slot Cover 52

Prerequisites 52

Required Tools and Equipment 52

Steps 53

Installing AC Input Power Cords 53

Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide

Contents

Prerequisites 53

Required Tools and Equipment 54

Steps 54

Installing DC Input Power Cables 55

Prerequisites 55

Required Tools and Equipment 55

Steps 56

Powering On and Powering Off the Fabric Card Chassis 57

Powering On the Fabric Card Chassis 57

Prerequisites 57

Required Tools and Equipment 58

Steps 58

Powering Off the Fabric Card Chassis 59

Steps 59

CHAPTER 5

Installing the Shelf Controller Cards and Fabric Cards 61

About Installing Cards and Associated Components 62

Preventing Electrostatic Discharge 62

Guidelines for Installing a Card 62

Steps for OIR Fabric Card Removal 63

About Cable Management Brackets 64

Installing and Removing an Impedance Carrier 66

Installing an S2 Fabric Card Impedance Carrier 67

Prerequisites 67

Required Tools and Equipment 67

Steps 68

Removing an S2 Fabric Card Impedance Carrier 68

Prerequisites 68

Required Tools and Equipment 68

Steps 68

About the SC and SC-SW Cards 69

Front Panel Ports 70

Installing an SC or SC-SW Card 71

Prerequisites 72

Required Tools and Equipment 72

Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide

Contents

Steps 72

Verifying the Installation of an SC or SC-SW Card 74

Troubleshooting the SC or SC-SW Card 77

About the Fabric Cards 77

S2 Fabric Card 78

S13 and Universal Fabric Card 78

Installing the Fabric Cards 79

Installing an S2 Fabric Card 79

Prerequisites 79

Required Tools and Equipment 79

Steps 80

Verifying the Installation of an S2 Fabric Card 82

S2 Fabric Card LEDs 83

Installing an S13 MC Fabric Card or Universal Fabric Card 85

CHAPTER 6

Removing and Replacing Chassis Components 87

Removing the Exterior Cosmetics 87

Prerequisites 87

Required Tools and Equipment 87

Removing the Front Exterior Cosmetics 88

Removing the Rear Exterior Cosmetics 94

Removing the Power Components 96

Removing AC Input Power Cords 96

Prerequisites 96

Required Tools and Equipment 96

Steps 97

Removing DC Input Power Cables 97

Prerequisites 97

Steps 98

Replacing an AC or DC Power Tray 99

Prerequisites 99

Required Tools and Equipment 99

Steps 100

Removing a Power Module Slot Cover 101

Prerequisites 101

Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide

Contents

Steps 101

Removing an AC or DC Power Module 102

Prerequisites 102

Required Tools and Equipment 102

Steps 103

Removing the FCC Ground Cable 103

Prerequisites 104

Required Tools and Equipment 104

Steps 105

Replacing a Power Control Module 105

Required Tools and Equipment 106

Steps 106

Removing the Power Enclosure 108

Required Tools and Equipment 108

Steps 109

Replacing the Fan Trays and Air Filter 110

About the Fan Trays and Air Filter 110

About the Fan Trays 111

Fan Tray LEDs 111

About the Air Filter 112

Replacing the Fan Tray 112

Prerequisites 112

Required Tools and Equipment 112

Steps 113

Replacing the Air Filter 114

Steps 114

Removing the Shelf Controller Cards and Fabric Cards 115

Guidelines for Removing a Card 116

Removing an SC or SC-SW Card 116

Prerequisites 116

Required Tools and Equipment 117

Steps 118

Removing an S2 Fabric Card 120

Guidelines for Handling CXP2 Optical Modules 120

Prerequisites 122

Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide

vii

Contents

Required Tools and Equipment 122

Steps 123

Removing an S13 Multi-Chassis Fabric Card 125

APPENDIX A

System Specifications 127

Fabric Card Chassis Specifications 127

Power Specifications 128

Environmental Specifications 129

Regulatory, Compliance, and Safety Specifications 130

APPENDIX B

System Product IDs 131

Component Product IDs 131

Fabric Card Product IDs 133

Cosmetic Product IDs 134

Accessory Product IDs 134

Optical Module IDs 135

APPENDIX C

Cabling a Multi-Chassis Configuration 137

About the Cisco NCS 6000 Multi-Chassis System 137

Prerequisites 138

Cabling Requirements 138

MPO-24 Cable Specifications 140

Required Tools and Equipment 142

Cabling Overview 143

Cable Routing Considerations 143

General Cabling Procedures 144

Safety Guidelines 144

Cabling the Ethernet Control Plane Network 145

Cabling the Control Plane for a 2+1 Multi-Chassis system 145

Cabling the Control Plane for a 2+2 Multi-Chassis System 147

Cabling the Fabric 149

Fabric Overview 150

Multi-Chassis 2+1 Configuration 155

Prerequisites 155

Configuring a 2+1 Configuration with Six S2 FCs 155

Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide

viii

Contents

2+1 Software Configuration (Six S2 Fabric Cards) 158

Configuring a 2+1 Configuration with 12 S2 FCs 159

2+1 Software Configuration (12 S2 Fabric Cards) 162

Multi-Chassis 2+2 Configuration 163

Prerequisites 163

Configuring a 2+2 Configuration with 12 S2 Fabric Cards 163

2+2 Software Configuration (12 S2 Fabric Cards) 167

Configuring a 2+2 Configuration with 24 S2 Fabric Cards 168

2+2 Software Configuration (24 S2 Fabric Cards) 172

Multi-Chassis 4+2 Configuration 173

Prerequisites 173

Configuring a 4+2 Configuration with 12 S2 Fabric Cards 174

4+2 Software Configuration (12 S2 Fabric Cards) 181

Configuring a 4+2 Configuration with 24 S2 Fabric Cards 181

4+2 Software Configuration (24 S2 Fabric Cards) 188

Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide

Contents

Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide

Contents

Inhaltsverzeichnis

Andere Cisco Chassis Handbücher

Cisco

Cisco CRS-1 - Carrier Routing System Router Technisches Handbuch

Cisco

Cisco Remote PHY Shelf 7200 Bedienungsanleitung

Cisco

Cisco CRS-1 - Carrier Routing System Router Bedienungsanleitung

Cisco

Cisco UCS C4200 Montage- und Wartungsanleitung

Cisco

Cisco NCS 6000 Bedienungsanleitung

Cisco

Cisco cBR Series Bedienungsanleitung

Cisco

Cisco NCS 4016 Bedienungsanleitung

Cisco

Cisco NCS 4000 Series Bedienungsanleitung

Cisco

Cisco Nexus 7004 Bedienungsanleitung

Cisco

Cisco cBR Bedienungsanleitung

Cisco

Cisco C4200 Bedienungsanleitung

Cisco

Cisco UCS 5108 Systemhandbuch

Cisco

Cisco NCS 1001 Bedienungsanleitung

Cisco

Cisco NCS 1004 Handbuch

Cisco

Cisco ASA5500-HW - Hardware Accessory Kit Network... Handbuch

Cisco

Cisco AS5350XM Bedienungsanleitung

Cisco

Cisco UCS 5108 Bedienungsanleitung

Cisco

Cisco UCS S3260 Bedienungsanleitung

Cisco

Cisco NCS 4009 Bedienungsanleitung

Cisco

Cisco NCS 4016 Bedienungsanleitung

Cisco

Cisco 5505 - ASA Firewall Edition Bundle Service-Handbuch

Cisco

Cisco CRS-1 - Carrier Routing System Router Benutzerhandbuch

Cisco

Cisco ONS 15454 DWDM Betriebsanleitung

Cisco

Cisco ONS 15454 Bedienungsanleitung

Beliebte Chassis Handbücher anderer Marken

Advantech

Advantech IPC-623 Series Bedienungsanleitung

IMC Networks

IMC Networks iMcV/18 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR665 V3 Bedienungsanleitung

Wuntronic

Wuntronic PCI4DRQ Bedienungsanleitung

EtherWAN

EtherWAN EMC400 Bedienungsanleitung

Overland Storage

Overland Storage SnapSAN S1000 Leitfaden

Philips

Philips LC4.1E A Bedienungsanleitung

Supermicro

Supermicro SCF418 Series Bedienungsanleitung

Chenbro

Chenbro RM437 Series Bedienungsanleitung

Pickering

Pickering 40-914 Bedienungsanleitung

HP A7503-S Montageanleitung

Supermicro

Supermicro SC823MTQ-R700LPB Bedienungsanleitung

SilverStone

SilverStone RMS08 Series Bedienungsanleitung

NI cRIO-FRC II Bedienungsanleitung

Pickering

Pickering 65-200 Bedienungsanleitung

Allied Telesis

Allied Telesis AT-MMCR18 Bedienungsanleitung

Hisense

Hisense MSD6586 Bedienungsanleitung

JYTEK

JYTEK PXIe-62780 Bedienungsanleitung