Cisco Unified Access CT5760 Kurzanleitung

Cisco Systems, Inc.

www.cisco.com

Cisco Unified Access CT5760 Controllers and

Catalyst 3850 Switches Web GUI Deployment

Guide, Cisco IOS XE Software Release 3.2.2

Last Updated: August, 2013

Cisco Unified Access CT5760 Controllers and Catalyst 3850 Switches Web GUI Deployment Guide, Cisco IOS XE Software Release 3.2.2

Introduction

This document introduces the maintenance release 3.2.2 Web GUI functionality for the Cisco Converged

Access CT5760 and Cat3850 products. This guide is designed to help you access, configure, and monitor

both products using the Web GUI interface.

CT5760 Controller

CT5760 is an innovative UADP ASIC based wireless controller deployed as a centralized controller in

the next generation unified wireless architecture. CT5760 controllers are specifically designed to

function as the Unified model central wireless controllers. They also support the newer Mobility

functionality with Converged Access switches in the wireless architecture.

CT5760 controllers are deployed behind a core switch/router. The core switch/router is the only gateway

into the network for the controller. The uplink ports connected to the core switch are configured as

EtherChannel trunk to ensure port redundancy.

This new controller is an extensible and high performing wireless controller, which can scale up to 1000

access points and 12000 clients. The controller has 6-10 Gbps data ports.

As a component of the Cisco Unified Wireless Network, the 5760 series works in conjunction with Cisco

Aironet access points, the Cisco Prime infrastructure, and the Cisco Mobility Services Engine to support

business-critical wireless data, voice, and video applications.

Catalyst 3850 Switches

Unified Access Catalyst 3850 switches are innovative UADP ASIC hardware that can support multiple

protocols and has many advantages over the current hardware platform. CAT3850 switch has an

integrated hardware based wireless support with CAPWAP and fragmentation. The CAT3850 switch has

40gig of uplink bandwidth with all port functioning at line rate.

Cisco Unified Access CT5760 Controllers and Catalyst 3850 Switches Web GUI Deployment Guide, Cisco IOS XE Software Release 3.2.2

Getting Started

The CAT3850 switches provide Open Service platform. It is a 4 core CPU to leverage the OS and to host

various services. The CAT3850 hardware is the Next-Gen switching hardware.

UA CAT3850 switches have unified wired and wireless architecture. The wireless operating system is

IOS based. UA CAT3850 switches provide uniform wired and wireless policies. The CAT3850 switch

can manage 50 access points (802.11n) and support 2000 clients per stack.

Getting Started

Before you get started with enabling the WEB GUI on the Cat3850/CT5760, make sure you have the

following:

1. CLI access to the box. Console Access information is shown in the CLI/Console Access section.

2. Have one of the Supported Browser Version as listed in the section.

3. Go through the release notes for Release 3.2.2 located at:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3850/software/release/3.2_0_se/release_notes/

OL28114.html#wp223882

4. Have access information such as Username/Password and networking access information.

Supported Browser Version

The following is a list of supported browser versions:

•Chrome – Ver. 26.x

•Mozilla – Ver. 20.x

•IE – Ver. 8.x, 9.x and 10.x

Cisco Unified Access CT5760 Controllers and Catalyst 3850 Switches Web GUI Deployment Guide, Cisco IOS XE Software Release 3.2.2

Enabling WEB GUI on both the 5760 and 3850 Platforms

CLI/Console Access

Before you configure the switch or controller for basic operations, you must connect it to a PC that uses

a VT-100 terminal emulator (such as, HyperTerminal, ProComm, or Putty).

The controller has both EIA/TIA-232 asynchronous (RJ-45) and USB 5-pin mini Type B, 2.0 compliant

serial console ports. The default parameters for the console ports are 9600 baud, 8 data bits, 1 stop bit,

and no parity. The console ports do not support hardware flow control. Choose the serial baud rate of

9600; if you have issues, try a baud rate of 115200. The figure below shows an example of a Mac Secure

CRT; use similar configuration for PC/Windows Putty, and so on.

Figure 1 Mac Secure CRT Example

Enabling WEB GUI on both the 5760 and 3850 Platforms

Currently, Cat3850 and CT5760 ships with the first release labeled as 3.2.01. If you have an existing

CAT3850/CT5760 and want to use the GUI to configure or monitor your wireless network, please follow

the steps below:

1. Console to the 3850/5760 platform. Save your current configuration and upgrade to 3.2.2 release

available on cisco.com. Upgrade procedure can be found in the link below:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3850/software/release/3.2_0_se/

system_management/appendix/swiosfs.html#wp1311040

Note During the upgrade, firmware will be upgraded and therefore it will take few more additional minutes

than the regular upgrade. Please do not turn off the unit during the upgrade.

2. After upgrading to 3.2.2 version, the web GUI functionality will be enabled. By default, https is

enabled. You can access the web GUI through https, but if you want to enable http access, you can

do so by issuing the following IOS CLI command: Controller(config)#ip http server

3. Using the IOS CLI, you will need to create a username and password to access the GUI. You can

configure a local username by issuing the following command:

Controller(config)#username admin privilege 15 password Cisco123. Or you can configure

it to use credentials using an authentication server. Make sure the user has privilege 15 access level.

Cisco Unified Access CT5760 Controllers and Catalyst 3850 Switches Web GUI Deployment Guide, Cisco IOS XE Software Release 3.2.2

Configuration Examples

4. To access the GUI, you can configure the out of band management port (GigE 0/0) or use existing

reachable configured interfaces through the network.

5. Now, you will be able to access the Web GUI interface. Open a browser and type your

controller/switch IP address. Example: https://10.10.10.5/. Please refer to the configuration

examples below for additional Web GUI access information.

Note If you have an out of the box or brand new 5760 or 3850, please console to the box and go through the

Startup Wizard as outlined in the deployment guide located at:

http://www.cisco.com/en/US/docs/wireless/technology/5760_deploy/Supported_Features.html

Configuration Examples

If you require additional information regarding any of the field while going through the deployment

guide, please refer to the GUI Online Help available after you have successfully accessed the GUI

through the steps below.

GUI Access for CT5760/3850 Example

Complete these steps:

Step 1 For GUI access, open a browser and type your controller IP address. By default https is enabled, for

example:

https://10.10.10.5

username: admin

Password: Cisco123

Note You can setup username/password using the following CLI command:

Controller(config)#username admin privilege 15 password Cisco123. This is an example and not

the default username and password.

Cisco Unified Access CT5760 Controllers and Catalyst 3850 Switches Web GUI Deployment Guide, Cisco IOS XE Software Release 3.2.2

Configuration Examples

Once you login, you will be directed to the following page:

Step 2 Click Wireless WEB GUI, this will direct you to the home page shown below:

Cisco Unified Access CT5760 Controllers and Catalyst 3850 Switches Web GUI Deployment Guide, Cisco IOS XE Software Release 3.2.2

Configuration Examples

Basic Configuration for CT5760/3850 Example

In this section you will perform basic controller and management configuration using the GUI Wizard

of the CT5760 or CAT 3850.

Step 3 Under the Configuration tab, choose the option Wizard.

Step 4 Configure Admin username and password.

Cisco Unified Access CT5760 Controllers and Catalyst 3850 Switches Web GUI Deployment Guide, Cisco IOS XE Software Release 3.2.2

Configuration Examples

Step 5 Configure SNMP information—You can configure SNMP trap in this section, give a Location and

Contact and proceed to the next step.

Step 6 Management Interface Configuration—You can use the out of band Management Port to access the

controller. Enter the IP address and Netmask value and proceed to the next screen for Wireless

management configuration.

Cisco Unified Access CT5760 Controllers and Catalyst 3850 Switches Web GUI Deployment Guide, Cisco IOS XE Software Release 3.2.2

Configuration Examples

Step 7 Wireless Management Configuration—Here, you can configure Wireless Management interface on the

5760 and assign it for a specific VLAN. Please assign VLAN IP and default gateway.

Step 8 RF Mobility and Country Code settings—Here, you can enter the RF Mobility configuration and select

a country code. As an example, enter rfdemo as the RF mobility name and choose US for Country Code.

Step 9 Mobility Configuration—Here, you can change the Mobility Group Name and other Mobility timers.

Please click Next to go to the next screen.

Cisco Unified Access CT5760 Controllers and Catalyst 3850 Switches Web GUI Deployment Guide, Cisco IOS XE Software Release 3.2.2

Configuration Examples

Step 10 Creating a WLAN—You can create a WLAN in this screen. It is disabled by default. Create an 802.1x

WLAN name. In this example, it is NGWC1-1x.

Step 11 Enabling 802.11 Radios—Radios were disabled once the country code was changed in earlier steps.

Enable the radio by checking th 802.11a/n and 802.11 b/g/n check boxes.

Step 12 Time Settings—You can choose between two modes: Manual and NTP. In the following example, choose

NTP and use 10.10.10.1 as the NTP Server IP Address.

Step 13 Save and apply the Wizard

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco Controller Handbücher

Cisco

Cisco Firepower 4100 Series Bedienungsanleitung

Cisco

Cisco 2505 Bedienungsanleitung

Cisco

Cisco 5520 Kurzanleitung

Cisco

Cisco Catalyst 9800-40 Bedienungsanleitung

Cisco

Cisco 521G - Unified IP Phone VoIP Bedienungsanleitung

Cisco

Cisco CLG-8202-SEC Bedienungsanleitung

Cisco

Cisco SFS 3504 Bedienungsanleitung

Cisco

Cisco Catalyst 9800-80 Bedienungsanleitung

Cisco

Cisco Catalyst 9800-L Handbuch

Cisco

Cisco CS-MARS-20-K9 - Security MARS 20 Bedienungsanleitung

Cisco

Cisco 4404 - Wireless LAN Controller Bedienungsanleitung

Cisco

Cisco Cisco mds 9216 - fabric switch Bedienungsanleitung

Cisco

Cisco Flex 7500 Series Kurzanleitung

Cisco

Cisco CSC-MEC Bedienungsanleitung

Cisco

Cisco 2100 Series Bedienungsanleitung

Cisco

Cisco OL-8335-02 Bedienungsanleitung

Cisco

Cisco AIR-PCM342 Handbuch

Cisco

Cisco 8540 - Catalyst Campus Switch Router Modular Expansion... Bedienungsanleitung

Cisco

Cisco AIR-WLC2106-K9 - Wireless LAN Controller... Bedienungsanleitung

Cisco

Cisco Identiv ICPAM EM-100 Bedienungsanleitung

Cisco

Cisco SCE 1000 and Bedienungsanleitung

Cisco

Cisco 5520 Bedienungsanleitung

Cisco

Cisco ONS 15454 Series Bedienungsanleitung

Cisco

Cisco 2100 Series Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch