Cisco IP/VC 3526 Anleitung zur Verwendung
Corporate Headquarters:
Copyright © 2005 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Release Notes for Cisco IP/VC 3526
PRI Gateway and Cisco IP/VC 3540 PRI
Gateway Release 3.0
January 14, 2005
This release note describes the new features and known issues for the Cisco IP/VC
3526 PRI Gateway and Cisco IP/VC 3540 PRI Gateway Release 3.0. Use this
release note with the Cisco IP/VC 3526 PRI Gateway and Cisco IP/VC 3540 PRI
Gateway Module Administrator Guide, 2.0.
For regulatory and compliance information, see Regulatory Compliance and
Safety Information for the Cisco IP/VC 3500 Products.
Contents
This document include the following sections:
•Introduction, page 2
•Documentation Roadmap, page 2
•New and Changed Information, page 2
•Important Notes, page 3
Introduction
2
Release Notes for Cisco IP/VC 3526 PRI Gateway and Cisco IP/VC 3540 PRI Gateway Release 3.0
78-16907-01
•Known Issues, page 3
•Caveats, page 4
•Obtaining Documentation, Obtaining Support, and Security Guidelines,
page 6
Introduction
Cisco IP/VC 3526 PRI Gateway and Cisco IP/VC 3540 PRI Gateway perform
protocol translation that allows H.323 endpoints on a LAN to communicate with
H.320 endpoints on the public switched telephone network (PSTN). The Cisco
IP/VC 3526 PRI Gateway and Cisco IP/VC 3540 PRI Gateway support PRI ISDN
interfaces.
Documentation Roadmap
Table 1contains an overview of the related documentation for the
Cisco IP/VC 3526 and Cisco IP/VC 3540. Use this information to access and
order the latest versions of the documentation as described in the “Obtaining
Documentation” section on page 6.
New and Changed Information
Release 3.0 includes the following new features:
Table 1 Documentation Roadmap
Document Description
Cisco IP/VC 3526 PRI Gateway and
Cisco IP/VC 3540 PRI Gateway
Module Administrator Guide, 2.0
Provides an overview of the Cisco
IP/VC 3500 videoconferencing
solution, as well as installation,
configuration, and troubleshooting
information.
Regulatory Compliance and Safety
Information for the Cisco IP/VC 3500
Products
Provides regulatory compliance and
safety information and translations of
warning messages.
3
Release Notes for Cisco IP/VC 3526 PRI Gateway and Cisco IP/VC 3540 PRI Gateway Release 3.0
78-16907-01
Important Notes
•Support for the H.264 video codec.
•The gateway can detect in-band DTMF tones on the ISDN side and generate
corresponding H.245 out-of-band signals on the IP side for both voice and
video calls.
•Support for a new default Quality of Service option for optimal TOS setting
selection.
Important Notes
To ensure that your gateway is secure from outside infiltration, we recommend
that you change the default settings of the following options:
•Gateway user name and password
•SNMP service community parameters in the Board Basics tab
Known Issues
•We recommend that you use Microsoft Explorer version 5.0 or later.
•The Ethernet port may stop responding if disconnected and then reconnected
when there are active calls in the gateway. To restore Ethernet port
functionality, reset the gateway.
•The Max Digits and Maximum Digits Send fields in the ISDN Information
section of the PRI Port tabs are for future use.
•DTMF interpretation problems occur when using the G.723.1 audio channel
in gateway-to-MCU voice calls. Use the Force711ForMCU enable advanced
command to configure the gateway to open a G.711 channel only. This setting
is enabled by default when the gateway is shipped with transcoders. When the
gateway has no transcoders or when transcoder capabilities are disabled,
disable the setting by using the Force711ForMCU disable advanced
command.
•Some PSTN switches react slowly to a “busy out [off]” request message sent
from the gateway when the ISDN Rollover feature is in use. As a result,
dialing from the ISDN side may return a busy tone immediately after the
“busy out [off]” request message is sent to the switch. In such cases, calls do
not reach the gateway, and additional dialing is required.
Caveats
4
Release Notes for Cisco IP/VC 3526 PRI Gateway and Cisco IP/VC 3540 PRI Gateway Release 3.0
78-16907-01
•You must disable G.722.1 when working with TANDBERG endpoints that
are running software version 7.xwhen used with IVR on 128 Kbps calls. To
do this, uncheck the Enable G.722.1 option in the Media Modes section of the
Gateway Settings tab.
•You must disable G.722 when working with Aethra Vega 2 endpoints that are
running software version 2.182. To do this, uncheck the Enable G.722 option
in the Media Modes section of the Gateway Settings tab.
•FECC works with Sony, Polycom, and TANDBERG endpoints only.
•B-channels released on a downspeeding event during incoming Call Setup
will not be available for new calls until the call on which the downspeeding
event took place terminates.
•When working with endpoints that do not support Fast Start, ensure that the
default unchecked setting is selected for the Support H.323 Fast Start on
voice-only call setup option in the Advanced section of the Settings tab.
•The gateway may not register properly to the Polycom Path Navigator
gatekeeper. To enable successful registration, remove all services from the
gateway, register to Path Navigator, and then reconfigure the services on the
gateway.
•When using TANDBERG 6000 with software version B9.0 on the ISDN side,
bonded calls over 8B (512 Kbps) may not connect when dialing from the IP
side. Contact Cisco Technical Assistance Center (TAC) for assistance if you
experience this problem.
•G.723.1 coding does not work well with Sony PCS-1 on the IP side. To work
with PCS-1, disable the G.723.1transcoding option.
•Calls will not connect when using H.264 with VCON Escort/Cruiser version
4.6 on the ISDN side. To work with Escort/Cruiser version 4.6, disable the
H.264 video codec.
•Video channels may not open successfully when using the VCON 5000 on the
ISDN side.
Caveats
Open and resolved caveats are no longer listed in release notes. Instead, the latest
information about caveats is available through an online tool, Bug Toolkit, for
customers to query defects according to their own needs.
5
Release Notes for Cisco IP/VC 3526 PRI Gateway and Cisco IP/VC 3540 PRI Gateway Release 3.0
78-16907-01
Caveats
To find new features or enhancements that have been added to a release or to read
about caveat fixes from previous releases, you should run a query whenever a new
Cisco IP/VC 3526 PRI Gateway or Cisco IP/VC 3540 PRI Gateway release is
distributed.
To access Bug Toolkit, you must have an Internet connection and a Web browser,
as well as a Cisco.com username and password.
To use Bug Toolkit, follow this procedure.
Step 1 Go to http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl and log
in to Bug Toolkit by entering your Cisco.com user name and password.
Step 2 Click Launch Bug Toolkit.
Step 3 To find a specific caveat, enter the ID number in the Enter known bug ID field and
click Search.
Bug Toolkit returns the caveat information for which you queried.
or
To view all caveats, go to the Search for bugs in other Cisco software and
hardware products section, enter Cisco IP/VC 3500 Series Videoconferencing
Products in the Product Name field, and click Next.
The Bug Toolkit search page appears.
Step 4 Select the filters to query for caveats. You can choose any or all of the available
options.
Step 5 Click Next.
Bug Toolkit returns a list of caveats based on your query.
Obtaining Documentation, Obtaining Support, and Security Guidelines
6
Release Notes for Cisco IP/VC 3526 PRI Gateway and Cisco IP/VC 3540 PRI Gateway Release 3.0
78-16907-01
Obtaining Documentation, Obtaining Support, and
Security Guidelines
For information on obtaining documentation, obtaining support, providing
documentation feedback, security guidelines, and also recommended aliases and
general Cisco documents, see the monthly What's New in Cisco Product
Documentation, which also lists all new and revised Cisco technical
documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
CCDE, CCVP, Cisco Eos, Cisco StadiumVision, the Cisco logo, DCE, and Welcome to the Human Network are
trademarks; Changing the Way We Work, Live, Play, and Learn is a service mark; and Access Registrar, Aironet,
AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the
Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the
Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, Enterprise/Solver, EtherChannel, EtherFast,
EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient,
IOS, iPhone, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, IronPort, the
IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MGX, Networkers, Networking Academy, Network
Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert,
StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are
registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of
the word partner does not imply a partnership relationship between Cisco and any other company. (0801R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples,
command display output, and figures included in the document are shown for illustrative purposes only. Any use of
actual IP addresses in illustrative content is unintentional and coincidental.
© 2008 Cisco Systems, Inc. All rights reserved.
Inhaltsverzeichnis
Andere Cisco Tor Handbücher
Cisco
Cisco IC3000 Bedienerhandbuch
Cisco
Cisco SPA-841 - Sipura VoIP Phone Bedienungsanleitung
Cisco
Cisco IG21 Series Bedienungsanleitung
Cisco
Cisco DPC3825 Bedienungsanleitung
Cisco
Cisco Expressway Series Bedienungsanleitung
Cisco
Cisco Explorer 9800 Bedienungsanleitung
Cisco
Cisco Comcast Xfinity DPC3939 Bedienungsanleitung
Cisco
Cisco ATA 186 Bedienerhandbuch
Cisco
Cisco LINKSYS RFC 2364 Original Betriebsanleitung
Cisco
Cisco Expressway CE1000 Appliance Bedienungsanleitung
Cisco
Cisco VG30D Bedienungsanleitung
Cisco
Cisco VG310 Handbuch
Cisco
Cisco D-PCG1000 PowerKEY CAS Bedienungsanleitung
Cisco
Cisco LINKSYS RFC 2364 Bedienungsanleitung
Cisco
Cisco Linksys WAG310G Bedienungsanleitung
Cisco
Cisco AS5350 - Universal Access Server Bedienungsanleitung
Cisco
Cisco DPC Bedienungsanleitung
Cisco
Cisco Network Device MGX 8240 Bedienungsanleitung
Cisco
Cisco 3521 Service-Handbuch
Cisco
Cisco REN301 Bedienungsanleitung
Beliebte Tor Handbücher anderer Marken
LST
LST M500RFE-AS Bedienungsanleitung
Kinnex
Kinnex Media Gateway Bedienungsanleitung
2N Telekomunikace
2N Telekomunikace 2N StarGate Bedienungsanleitung
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung
Telsey
Telsey CPVA 500 - SIP Bedienungsanleitung
