Cisco 500 Series Leitfaden

Troubleshooting and Maintenance

•Troubleshoot Your Cisco Headset 500 Series, on page 1

•Maintain Your Cisco Headset 500 Series, on page 10

Troubleshoot Your Cisco Headset 500 Series

You may experience issues related to the following scenarios:

•Your headset cannot communicate with your selected call device.

•The sound in your headset speakers is poor.

•You cannot be understood when you speak into the headset microphone.

If you experience problems, your administrator can help troubleshoot the root cause of the problem.

Related Topics

Report Headset Issues Through Your Cisco IP Phone, on page 8

What to Do First

Try these actions first if you have trouble with your Cisco Headset 500 Series.

•If you are using the Cisco Headset 520 Series or Cisco Headset 530 Series:

•Unplug and replug your headset into your call device

•If you are using the Cisco Headset 560 Series:

•Unplug your headset base from its power source, wait a moment, and plug the power source back

in.

•Restart your wireless headset. Press and hold for 4 seconds to power your headset off

and place your headset in the cradle on the base.

•Check the connection between your headset base and your call device. Make sure that all cords

are properly plugged in.

•Check your device settings to see if your headset is detected.

Troubleshooting and Maintenance

•On a Cisco IP Phone connected to Cisco Unified Communications Manager: Press Applications

and select Accessories.

•On a Cisco IP Phone with Multiplatform Phone Firmware: Press Applications and select

Status >Accessories.

•On a Cisco Webex Desk Series: Tap on the screen and select from the available audio devices in

the upper right corner.

•On Cisco Jabber: Click Menu >Options >Audio.

•On Cisco Webex: Click on your profile picture and select Settings >Audio >Cisco Headset.

•On Cisco Webex Meetings: Click Audio >Computer Audio Settings.

•Test a different headset with your device to determine if the problem is with your wireless headset or

your device.

•If you are using your headset with a Cisco IP Phone, make sure that your headset software and phone

firmware version is up-to-date.

•If you are using your headset with Jabber or Webex on a Windows or Mac device, close other open soft

clients.

Related Topics

Update Your Cisco Headset Firmware With a Cisco IP Phone, on page 10

Problems With Your Headset Audio

You Hear Garbled or Inconsistent Sound in Your Wired Headset

Problem

There is sound coming through the headset but it is inconsistent or full of static.

Solution

Using Cisco Headset 521, 522, 531, and 532:

•Unplug your headset from the call source. Reconnect the headset.

•Check the connectivity of your call source.

You Hear Garbled or Inconsistent Sound in Your Wireless Headset

Problem

There is sound coming through the headset but it is inconsistent or full of static.

Solution

•Test you call device to see if the problem is in your headset or with your device.

Troubleshooting and Maintenance

Problems With Your Headset Audio

•Try a different headset or audio source with your call device.

•On a Cisco IP Phone, use the handset to make a call.

•Try these steps if you decide your headset is the source of the poor audio quality.

•Make sure you have the most recent firmware versions on both your headset and your call device.

•Unplug and plug in the headset cables.

•Press and hold the Press and hold the Call button for 4 seconds to turn off the headset. Place the

headset on to the base to pair with the headset.

•Make sure that your base is not receiving interference from other DECT sources. For best call quality,

make sure that your headset base is at least 3 feet (1 meter) away from another Cisco headset base.

•Make sure that you are not taking your headset too far from the base.

Related Topics

Cisco Headset 560 Series

You Can't Hear Sound Through Your Cisco Headset 520 Series and Cisco Headset 530 Series

Problem

There is little or no sound coming through your Cisco Headset 520 Series or Cisco Headset 530 Series.

Solution

•Check the volume level on your headset. Press the volume controls on your inline controller or wireless

headset to adjust the sound level.

•Ensure that the audio output on your device is set to Cisco Headset.

•On a Cisco IP Phone connected to Cisco Unified Communications Manager: Press Applications

and select Accessories.

•On a Cisco IP Phone with Multiplatform Phone firmware: Press Applications and select Status >

Accessories.

•On Cisco Jabber: Click Menu >Options >Audio.

•In Cisco Webex: Click on your profile picture and select Settings >Audio >Cisco Headset.

•In Cisco Webex Meetings: From the Select Audio Connection drop-down list, select Cisco Headset.

•Close any other calling soft clients.

You Can't Hear Sound Through Your Wireless Headset

Problem

There is little or no sound coming through your wireless headset.

Troubleshooting and Maintenance

You Can't Hear Sound Through Your Cisco Headset 520 Series and Cisco Headset 530 Series

Solution

•Check the volume level on your headset.

•Ensure that the audio output on your device is set to Cisco Headset.

•On a Cisco IP Phone connected to Cisco Unified Communications Manager: Press Applications

and select Accessories.

•On a Cisco IP Phone with Multiplatform firmware: Press Applications and select Status >

Accessories.

•On Cisco Jabber: Click Menu >Options >Audio.

•In Cisco Webex: Click on your profile picture and selct Settings >Audio >Cisco Headset.

•In Cisco Webex Meetings: From the Select Audio Connection drop-down list, select Cisco Headset.

•Ensure that the headset base is plugged into a power source. The headset cannot function without its

base.

•Close any other calling soft clients.

•Make sure that your wireless headset is paired with its base. Place the headset into the base to pair the

headset and base. Make sure that the headset is properly seated. When joined, the headset and base

sync automatically.

•Check that the headset base is properly connected to your desired call device.

•If you use your headset with a multibase, make sure that your desired call source is selected.

•Check the battery level on your wireless headset.

Other People Can't Hear You on Your Cisco Headset 520 Series or Cisco Headset 530 Series

Problem

You cannot be heard when using your Cisco Headset 520 Series or Cisco Headset 530 Series.

Solutions

•Check to make sure your microphone is not muted. Press Mute on your controller or to mute and unmute

your microphone. When you are muted on a call, Mute on your inline controller or call indicator LED on

your base shows solid red.

Troubleshooting and Maintenance

Other People Can't Hear You on Your Cisco Headset 520 Series or Cisco Headset 530 Series

•Make sure that the microphone boom has been lowered. For optimal sound, the headset microphone

should be no further than 1 in (2.5 cm) from your mouth.

•Make sure that your headset is properly plugged into your preferred call device.

•Check that your desired call device detects your headset.

Other People Can't Hear You on Your Cisco Headset 560 Series

Problem

You cannot be heard when using your Cisco Headset 560 Series.

Solutions

•Check to make sure your microphone is not muted. Press Mute on your wireless headset to mute and

unmute your microphone. When you are muted on a call, the call indicator LED on your base shows solid

red.

•Make sure that the microphone boom has been lowered. For optimal sound, the headset microphone

should be no further than 1 in (2.5 cm) from your mouth.

•Make sure that your base is properly plugged into your preferred call device. Ensure that the connection

to and from the base is secure.

•Make sure that you don't take your headset too far from the base.

•Make sure that your desired call device detects your headset.

•Move your base away from potential sources of radio interference such as DECT, Wi-Fi, and Bluetooth

devices.

Related Topics

Cisco Headset 560 Series

Your Headset Does Not Alert You to Incoming Calls on a Cisco IP Phone

Problem

Your Cisco Headset 500 Series does not play a tone when you have an incoming call.

Troubleshooting and Maintenance

Other People Can't Hear You on Your Cisco Headset 560 Series

Solution

This is a known limitation in the Cisco Headset 500 Series with Firmware Release 1.0(2) or older. Update your

headset firmware to the latest firmware release.

Your Headset and Base Won't Pair

Problem

Your headset is seated in the wireless base but they have not paired. The headset and battery indicator LEDs

on the base flash rapidly. It should take no longer than 10–12 seconds for the headset and base to pair.

Solution

Power cycle the headset.

1. With the headset off the base, press and hold the Call button for 4 seconds until the LED on the

headset is off.

2. Seat the headset back on to the base. The headset automatically turns on and pairs with the headset base.

If the headset does not have the most recent software load, the headset will begin to update.

Note

Base with Y-Cable Doesn't Work

Problem

The Cisco Headset 560 Series with standard base or multibase does not work when plugged into a Cisco IP

Phone with the Y-cable.

Solution

•Check that all Y-cable connectors are plugged into the appropriate ports on the phone.

•Phone: AUX port and headset port

•Base: USB port

•For on-premises phones, check that Connect e-hook headset is selected in Applications >Admin

settings >Aux port.

Conference Feature Issues on Your Cisco Headset 560 Series

Problem

Your headset or base doesn't enter conferencing mode when you try to add a guest headset.

Troubleshooting and Maintenance

Your Headset and Base Won't Pair

Solution

•Check each headset's firmware to make sure that they have headset Firmware Release 1.5(1) or later.

Any headset that tries to start or join conferencing mode must have Firmware Release 1.5(1) or later.

•Check with your administrator to make sure that conferencing mode is enabled.

Problems with Your Bluetooth Connection

The Cisco Headset 560 Series Multibase enables you to connect a call device through Bluetooth.

Bluetooth Does Not Turn On

Problem

Bluetooth doen't turn on when you press the Bluetooth button on the back of your multibase.

Solution

Contact your headset administrator to see if Bluetooth functionality has been disabled remotely.

Bluetooth LED Pulses White

Problem

The Bluetooth LED pulses white.

Solution

•Check that Bluetooth is activated on your desired call device.

•If you have already paired your device, make sure that you select Cisco Headset XXX from the Bluetooth

menu and attempt to reconnect.

The Multibase appears on your desired call device as Cisco Headset followed by

the last three digits of the base serial number. Your base serial number can be

found on the underside of your base.

Note

•Put the base in pairing mode and pair the call device to the base. To put your base in pairing mode, press

the Bluetooth button on the back of the base twice.

Related Topics

Connect the Multibase to a Bluetooth Device

There is No Audio With Bluetooth Turned On

Problem

The Bluetooth LED shows solid white but you cannot hear any audio.

Troubleshooting and Maintenance

Problems with Your Bluetooth Connection

Solution

•Make sure the audio on your intended call device is turned up.

•Make sure that the Mobile source is selected on the base. The source LED shows solid white when

it is selected.

•Try re-pairing the multibase to your call device. Press and hold the Bluetooth button at the back of the

base for four seconds. Press the Bluetooth button twice to put the base into pairing mode and select

Cisco Headset from your call device settings menu.

Wireless Battery Issues

Headset Doesn't Charge

Problem

Your Cisco Headset 560 Series doesn't charge when placed on the base.

Solution

•Make sure that your headset is properly seated on the base. When the headset is properly seated, the

LED shows solid white. When charging, the LEDs on the base light up in sequence from left to right. When

the headset is fully charged, all five battery indicator LEDs show solid white.

•Check that your base is plugged into a reliable power source.

Headset Does Not Hold a Charge

Problem

The wireless headset is not holding a full charge.

Solution

Your Cisco Headset 560 Series is designed to hold its charge for up to 8 hours of continuous use. If your headset

battery seems weak or defective, contact your IT department.

Report Headset Issues Through Your Cisco IP Phone

You can use the Cisco Collaboration Problem Report Tool (PRT) to collect and send phone logs, and to report

problems to your administrator. The PRT also logs information about your headset. If you see a message that

the PRT upload has failed, the problem report is saved on the phone and you should alert your administrator.

Procedure

Step 1 Press Applications .

Step 2 Select Phone information >Report problem.

Troubleshooting and Maintenance

Wireless Battery Issues

Step 3 Enter the date and time that you experienced the problem in the Date of problem and Time of problem fields.

Step 4 Select Problem description.

Step 5 Select a description from the displayed list, then press Submit.

Report Headset Issues Through Your Multiplatform Phone

You can use the Problem Reporting Tool (PRT) to collect and send phone logs, and to report problems to your

administrator. The PRT also logs information about your headset. If you see a message that the PRT upload

has failed, the problem report is saved on the phone and you should alert your administrator.

Procedure

Step 1 Press Applications .

Step 2 Select Status >Report problem.

Step 3 Enter the date and time that you experienced the problem in the Date of problem field. The current date appears

in this field by default.

Step 4 Enter the time that you experienced the problem in the Time of problem field. The current time appears in this

field by default.

Step 5 Select Problem description.

Step 6 Select a description from the displayed list.

Step 7 Press Submit.

Report Issues in Cisco Jabber

To report headset-related issues with Cisco Jabber, make sure to send call logs, which provide more detailed

audio information to our engineers.

Procedure

Step 1 In Cisco Jabber, click the gear icon and select Help >Report a problem.

Step 2 In the window, select the area of the problem you had and describe the problem in as much detail as you can.

Step 3 Include any relevant files or screen shots that may be useful.

Step 4 Click Send.

Report Headset Issues Through Your Cisco Webex Desk Series

You can send device logs to your Cisco Webex Desk Series device administrator. The device logs also include

information about your headset.

Troubleshooting and Maintenance

Report Headset Issues Through Your Multiplatform Phone

Procedure

Step 1 Tap the device name in the upper left corner of your device and select the Settings application.

Step 2 Select Issues and diagnostics.

Step 3 Press Send logs.

Maintain Your Cisco Headset 500 Series

Many headset-related issues may stem from using out-of-date firmware. You can check and update your

headset firmware on any supported Cisco IP Phone or with the latest version of Cisco Jabber.

Update Your Cisco Headset Firmware With a Cisco IP Phone

You can update your headset software on any supported Cisco IP Phone. During a headset firmware upgrade,

you can view the progress on your phone screen.

During the update, the LEDs on the Cisco Headset 560 Series base blink in sequence from left to right. After

the software upgrade completes successfully, the LEDs return to their idle state.

Procedure

Step 1 Connect your headset to a Cisco IP Phone.

Step 2 If the headset does not automatically begin to update, restart the phone. The phone downloads the latest

headset version file when the phone restarts and uploads it to the headset.

Update Your Headset Firmware on Cisco Jabber

You can update your headset software on any computer running Cisco Jabber version 12.5 or later. Jabber

automatically begins the update process if a new firmware release is available.

Jabber version 12.9 or later displays the headset update progress.

During the upgrade, the LEDs on the Cisco Headset 560 Series base blink in sequence from left to right. After

the software upgrade completes successfully, the LEDs return to their idle state.

Procedure

Step 1 Connect your headset via the USB cable to a computer running Cisco Jabber.

Step 2 Follow the on-screen instructions.

Troubleshooting and Maintenance

Maintain Your Cisco Headset 500 Series

Andere Handbücher für 500 Series

Inhaltsverzeichnis

Andere Cisco Headset Handbücher

Cisco

Cisco Cisco Headset 561 Bedienungsanleitung

Cisco

Cisco 500 Series Bedienungsanleitung

Cisco

Cisco Cisco Headset 561 Bedienungsanleitung

Cisco

Cisco 500 Series Bedienungsanleitung

Cisco

Cisco 730 Bedienungsanleitung

Cisco

Cisco Cisco Headset 561 Bedienungsanleitung

Cisco

Cisco Cisco Headset 561 Bedienungsanleitung

Cisco

Cisco 730 Bedienungsanleitung

Cisco

Cisco Jawbone ICON Bedienungsanleitung

Cisco

Cisco 500 Series Bedienungsanleitung

Cisco

Cisco 730 Bedienungsanleitung

Cisco

Cisco 730 Bedienungsanleitung

Cisco

Cisco Aironet 521 Bedienungsanleitung

Cisco

Cisco 232D Bedienungsanleitung

Cisco

Cisco 700 series Bedienungsanleitung

Cisco

Cisco Cisco Headset 561 Bedienungsanleitung

Cisco

Cisco Cisco Headset 562 Bedienungsanleitung

Cisco

Cisco 500 Series Bedienungsanleitung

Cisco

Cisco 531 Bedienungsanleitung

Cisco

Cisco 520 Series Bedienungsanleitung

Cisco

Cisco Headset 560 Series Bedienungsanleitung

Cisco

Cisco Headset 530 Series Bedienungsanleitung

Cisco

Cisco 500 Series Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung

Southwing

Southwing SA505 Bedienungsanleitung