Cisco 730 Bedienungsanleitung

Your Headset

•What's in the Box, on page 1

•How to Wear Your Headset, on page 2

•Download and Set Up the Cisco Headsets app on Your Mobile Device, on page 3

•Turn Your Headset On and Off, on page 4

•Headset Connection, on page 5

•Headset Power, on page 10

•Voice Assistant, on page 12

•About Audio Notifications, on page 13

What's in the Box

Your Cisco Headset 730 comes with the following accessories:

• Cisco Headset 730

• Hard case

Your Headset

• USB Adapter

• USB-A to USB-C cable

• 3.5 mm cable

How to Wear Your Headset

Adjust your headband so that your headset fits comfortably on your head. Make sure the headset microphones

are positioned forward.

Your Headset

How to Wear Your Headset

Download and Set Up the Cisco Headsets app on Your Mobile

Device

Cisco Headsets is a mobile app that lets you update, control, and customize your headset from any iPhone or

Android mobile device. You can upgrade your headset, adjust your noise cancellation levels, change your

equalizer settings, and manage your headset notifications all from the app interface.

Procedure

Step 1 On your mobile device, open your preferred app store and download Cisco Headsets.

Step 2 Open Cisco Headsets and follow the app set-up instructions.

Your Headset

Download and Set Up the Cisco Headsets app on Your Mobile Device

Turn Your Headset On and Off

The Power/Bluetooth switch is located on the back of the left ear cup.

Procedure

Step 1 Slide the Power/Bluetooth switch up to turn on the headset.

Step 2 Slide the Power/Bluetooth switch down to turn off the headset.

It takes about 5 seconds for the headset to fully power down.

Note

Your Headset

Turn Your Headset On and Off

Headset Connection

Connect Your Headset to a Bluetooth Device

Put your headset into pairing mode to make it discoverable to other devices. Your Cisco Headset 730 can

save up to eight different Bluetooth devices and maintain simultaneous connections with up to two devices

at once.

If you already have two active Bluetooth sources, you must disconnect one before you can save another

Bluetooth device to your headset.

Note

You can also follow the prompts in the Cisco Headsets app when you connect your headset to your mobile

phone.

Procedure

Step 1 Slide up and hold the Power/Bluetooth switch for two seconds until the Bluetooth LED blinks.

Step 2 Enable Bluetooth on your device.

You can enable and disable Bluetooth from the Settings menu on most call devices.

Step 3 Select your headset from the device list.

Your headset will appear in the device list as Cisco HS 730 followed by the last three digits of your headset

serial number.

Related Topics

Your Headset Serial Number

Your Headset

Headset Connection

Bluetooth LED

The Bluetooth LED is located on the back of the left ear cup at the top of the Power/Bluetooth switch and

shows your headset connection status.

Table 1: Bluetooth LED Status

System StateLight Status

Successful Bluetooth connection

Solid blue, then off

Headset in Pairing Mode

Blinks blue

Manage Your Bluetooth Connections in the Cisco Headsets App

You can use the Cisco Headsets mobile app to manage your headset Bluetooth connections. Your headset can

save up to eight Bluetooth devices and maintain an active connection with two at the same time.

Procedure

Step 1 On your mobile device, open the Cisco Headsets app.

Step 2 Tap Connected to at the bottom of the home screen.

Step 3 Select the device you wish to connect or disconnect.

Use the USB Adapter

Your Cisco Headset 730 comes with a USB adapter for use with call devices that don't have a Bluetooth

option. The USB Adapter comes out of the box pre-paired to your headset. The adapter automatically connects

to your headset when it plugs into a powered USB port.

When you connect the USB Adapter, the LED blinks and then turns solid when it connects to your headset.

If your headset is unavailable to connect, the LED shuts off.

When you want to disconnect your headset, simply unplug the adapter from the call device. It takes about 10

minutes for your headset to accept another active Bluetooth connection after you disconnect the USB Adapter.

You can also turn off your headset then on again to pair a new device quickly.

Your Headset

Bluetooth LED

You can't install firmware updates to your headset through the USB Adapter.

Note

Procedure

Step 1 Plug in your USB Adapter to your preferred device.

Step 2 Turn on your Cisco Headset 730.

Step 3 On your device, select Cisco HS USB Adapter from the Bluetooth device list.

Pair the USB Adapter to Your Headset

You can re-pair your USB Adapter if you have erased your headset Bluetooth pairings or need to replace your

adapter.

Procedure

Step 1 Connect the USB Adapter to your chosen device.

Step 2 Use a pen or a paper clip to press down the Pairing button on the USB Adapter for four seconds. The blue

LED on top of the adapter blinks when it enters pairing mode.

Step 3 On your headset, slide and hold the Power/Bluetooth switch for two seconds. The adapter and your headset

pair automatically. The LED on top of the adapter shows solid blue when it connects.

Table 2: USB Adapter LED Status

Adapter StatusUSB LED

The USB Adapter is connected to the headset.The LED shows solid

blue.

The USB Adapter is in pairing mode.The LED flashes blue.

The USB Adapter can't find a saved headset. Your headset automatically pairs

to the adapter when it turns on and has less than two active Bluetooth connections.

If you have erased all Bluetooth pairings from your headset, put the adapter and

your headset into pairing mode to reconnect them.

The LED flashes for 10

seconds and turns off.

Your Headset

Pair the USB Adapter to Your Headset

Alternate Between Active Bluetooth Sources

You can connect up to two Bluetooth devices to your headset at one time. Active calls are automatically placed

on hold when you answer a call on a different source.

Procedure

To change your Bluetooth source, play music or answer a call on a different connected source.

Pause music playback before you switch to a different music source.

Note

Delete Paired Devices

You can erase all paired Bluetooth devices from your headset.

This will also erase the USB Adapter from your headset's memory. See Pair the USB Adapter to Your Headset,

on page 7 to re-pair the adapter to your headset.

Note

Procedure

Slide and hold the Power/Bluetooth switch for nine seconds. If audible notifications are enabled, your headset

plays an audio prompt when it erases all Bluetooth devices.

Your Headset

Alternate Between Active Bluetooth Sources

Use the USB-C Cable

Use the included USB-C cable to connect your headset with your laptop, Cisco IP Phone, or Cisco Webex

DX device.

Procedure

Step 1 Plug the USB-C cable into the port at the bottom of the left ear cup.

Step 2 Connect the other end of the cable to your intended device.

Step 3 Slide the Power/Bluetooth slider up to turn on the headset.

Use the 3.5 mm Audio Cable

Use the included 3.5 mm audio cable to connect your headset with your laptop or mobile device. You can use

the audio cable to connect to a non-wireless device or if your headset battery is low.

You can't control calls or music playback when you use the 3.5 mm cable. Any connected Bluetooth sources

will have priority over the 3.5 mm audio connection.

Note

Procedure

Step 1 Plug the 3.5 mm audio cable into the port at the bottom of the left ear cup.

Your Headset

Use the USB-C Cable

Step 2 Insert the other end of the cable into the 3.5 mm jack on your device.

Headset Power

Check Your Remaining Battery Life

When you power on your headset, a voice notification announces your remaining battery charge. Your headset

notifies you when you have less then an hour of talk time remaining.

Voice notifications are turned on by default. You can toggle your headset voice notifications in the Cisco

Headsets mobile app.

Note

You can find more detailed battery charge information through the Cisco Headsets app.

Procedure

Slide the Power/Bluetooth switch up and let go.

• If you are wearing your headset, you can hear how many hours of talk time remain.

• If you are not wearing the headset, the power LED blinks to show your battery level.

Your Headset

Headset Power

Andere Handbücher für 730

Inhaltsverzeichnis

Andere Cisco Headset Handbücher

Cisco

Cisco Cisco Headset 561 Bedienungsanleitung

Cisco

Cisco 730 Bedienungsanleitung

Cisco

Cisco 531 Bedienungsanleitung

Cisco

Cisco Headset 530 Series Bedienungsanleitung

Cisco

Cisco 730 Bedienungsanleitung

Cisco

Cisco Cisco Headset 561 Bedienungsanleitung

Cisco

Cisco 730 Bedienungsanleitung

Cisco

Cisco 500 Series Bedienungsanleitung

Cisco

Cisco Cisco Headset 561 Bedienungsanleitung

Cisco

Cisco Cisco Headset 562 Bedienungsanleitung

Cisco

Cisco 500 Series Bedienungsanleitung

Cisco

Cisco Aironet 521 Bedienungsanleitung

Cisco

Cisco 500 Series Bedienungsanleitung

Cisco

Cisco 232D Bedienungsanleitung

Cisco

Cisco Jawbone ICON Bedienungsanleitung

Cisco

Cisco Cisco Headset 561 Bedienungsanleitung

Cisco

Cisco 500 Series Leitfaden

Cisco

Cisco Cisco Headset 561 Bedienungsanleitung

Cisco

Cisco 500 Series Bedienungsanleitung

Cisco

Cisco 500 Series Bedienungsanleitung

Cisco

Cisco 700 series Bedienungsanleitung

Cisco

Cisco 520 Series Bedienungsanleitung

Cisco

Cisco Headset 560 Series Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung

Southwing

Southwing SA505 Bedienungsanleitung