Cisco 7902G - Unified IP Phone VoIP Bedienungsanleitung

Corporate Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

http://www.cisco.com

Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 526-4100

Cisco IP Phone 7902G

for Cisco CallManager

License and Warranty

Text Part Number: 78-16335-01

Phone Guide

Cisco IP Phone 7902G for Cisco CallManager iii

Contents

Getting Started 1

How to Use this Guide 1

Where to Find Additional Information 2

Safety and Performance Information 2

Connecting Your Phone 4

An Overview of Your Phone 6

Buttons and Hardware 6

Understanding Feature Availability 8

Going On-Hook and Off-Hook 8

Basic Call Handling 9

Placing a Call 9

Answering a Call 9

Ending a Call 9

Using Hold and Resume 10

Transferring a Connected Call 10

Making Conference Calls 11

Forwarding Your Calls to Another Number 12

Using Voice Messaging 13

Prioritizing Critical Calls 14

Customizing Phone Settings 15

Adjusting the Volume 15

Setting Up Speed Dial Buttons 16

iv 78-16335-01

Accessing Your User Options Web Pages 17

Logging In to the User Options Web Pages 17

Troubleshooting Your Phone 18

Cisco One-Year Limited Hardware Warranty Terms 19

Cisco IP Phone 7902G for Cisco CallManager 1

Getting Started

These sections give you the basic information you need to start using your new Cisco IP Phone.

How to Use this Guide

This guide provides you with an overview of the features available on your phone. You can read it

completely for a solid understanding of your phone’s capabilities, or refer to the table below for

pointers to commonly-used sections.

If you want to... Then...

Review important safety

information

See the “Safety and Performance Information” section on

page 2.

Use your phone after someone else

has installed it for you

Start with the “An Overview of Your Phone” section on page 6.

Connect your phone to the

network

See the “Connecting Your Phone” section on page 4.

Learn what the button lights mean See the “Buttons and Hardware” section on page 6.

Make calls See the “Placing a Call” section on page 9.

Put calls on hold See the “Using Hold and Resume” section on page 10.

Transfer calls See the “Transferring a Connected Call” section on page 10.

Make conference calls See the “Making Conference Calls” section on page 11.

Change the ringer or call volume See the “Adjusting the Volume” section on page 15.

278-16335-01

Where to Find Additional Information

You can access the most current Cisco documentation on the World Wide Web at this URL:

http://www.cisco.com/univercd/home/home.htm

You can access the Cisco website at this URL:

http://www.cisco.com

International Cisco websites can be accessed from this URL:

http://www.cisco.com/public/countries_languages.shtml

Safety and Performance Information

Installing and Using Your Phone

Read the following safety notices before installing or using your Cisco IP Phone:

Warning

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury.

Before you work on any equipment, be aware of the hazards involved with electrical

circuitry and be familiar with standard practices for preventing accidents. Use the

statement number provided at the end of each warning to locate its translation in the

translated safety warnings that accompanied this device.

Warning

Read the installation instructions before you connect the system to its power source.

Warning

Ultimate disposal of this product should be handled according to all national laws and

regulations.

Warning

Do not work on the system or connect or disconnect cables during periods of lightning

activity.

Getting Started

Cisco IP Phone 7902G for Cisco CallManager 3

Warning

To avoid electric shock, do not connect safety extra low voltage (SELV) circuits to

telephone network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN

ports contain TNV circuits. Some LAN and WAN ports use RJ-45 connectors. Use caution

when connecting cables.

Using an External Power Supply

The following warnings apply when you use the external power supply with the Cisco IP Phone:

Warning

This product relies on the building's installation for short-circuit (over current)

protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC,

10A international) is used on the phase conductors (all current-carrying conductors).

Warning

The device is designed to work with TN power systems.

Warning

The plug-socket combination must be accessible at all times because it serves as the

main disconnecting device.

Caution Use only a Cisco-approved power supply.

478-16335-01

Connecting Your Phone

Your system administrator will likely connect your new Cisco IP Phone to the corporate IP telephony

network. If that is not the case, refer to the graphic and table below to connect your phone.

Caution If you plan to power your phone locally (instead of receiving power thorough the Ethernet

connection), use only a Cisco 48 volt power supply designed to work with a

CiscoIPPhone.

1Network (Ethernet) port (10 BASE T) 2Handset port

3DC adaptor port (DC48V) 4Power supply with DC output connector (Optional.

Required only if power is not supplied through an

Ethernet connection.)

5Power cable with wall AC plug.

Provided if your phone uses external

power

79976

Connecting Your Phone

Cisco IP Phone 7902G for Cisco CallManager 5

Adjusting the Handset Rest

When you connect your phone, you might want to adjust the handset rest to ensure that the receiver

will not slip out of the cradle. See the table below for instructions.

Registering with TAPS

After your phone is connected to the network, your system administrator might ask you to

auto-register your phone using TAPS (Tool for Auto-Registered Phones Support). TAPS might be used

either for a new phone or to replace an existing phone.

To register with TAPS, pick up the handset, enter the TAPS extension provided by your system

administrator, and follow the voice prompts. You might need to enter your entire extension, including

the area code. After your phone displays a confirmation message, hang up. The phone will re-start.

1Set the handset aside and pull the square plastic tab from the handset rest.

2Rotate the tab 180 degrees.

3Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab.

Return the handset to the handset rest.

1 2 3

77354

678-16335-01

An Overview of Your Phone

The Cisco IP Phone model 7902G is a basic telephone that provides the following features:

•Voice communication over a data network

•One phone line that can support up to two calls

•Familiar telephony features to handle calls easily

•Online control from your User Options web pages

Buttons and Hardware

1Cisco IP Phone

series type

Indicates the Cisco IP Phone model number

2Label and plastic

cover

Use the paper label, protected by a plastic cover, to indicate your phone

number. You can also note your speed dial numbers on this label.

Andere Handbücher für 7902G - Unified IP Phone VoIP

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco IP-Telefon Handbücher

Cisco

Cisco 88 Series Bedienungsanleitung

Cisco

Cisco 6901 Standard Bedienungsanleitung

Cisco

Cisco 8800 Series Bedienungsanleitung

Cisco

Cisco 7940G Bedienungsanleitung

Cisco

Cisco 8800 Series Bedienungsanleitung

Cisco

Cisco 7985G - IP Phone NTSC Video Bedienungsanleitung

Cisco

Cisco DATAVOX 7941 Bedienungsanleitung

Cisco

Cisco 7905 Bedienungsanleitung

Cisco

Cisco Small Business SPA525G2 Bedienungsanleitung

Cisco

Cisco SPA525G - Small Business Pro IP Phone VoIP Bedienungsanleitung

Cisco

Cisco MCS 7800 Series Bedienungsanleitung

Cisco

Cisco 7945 Series Bedienungsanleitung

Cisco

Cisco 7821 Bedienungsanleitung

Cisco

Cisco 7811 Bedienungsanleitung

Cisco

Cisco 7821 Bedienungsanleitung

Cisco

Cisco PA501G Bedienungsanleitung

Cisco

Cisco 8811 Bedienungsanleitung

Cisco

Cisco 9951 Standard Bedienungsanleitung

Cisco

Cisco Expansion Module 7914 Bedienungsanleitung

Cisco

Cisco 7941G - Unified IP Phone VoIP Bedienungsanleitung

Cisco

Cisco IP Conference Station 7935 Bedienungsanleitung

Cisco

Cisco CM 7 Bedienungsanleitung

Cisco

Cisco 8841 Bedienungsanleitung

Cisco

Cisco 8821 Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung

Nortel

Nortel i2050 Bedienungsanleitung

Fiberme

Fiberme FAP260 Series Bedienungsanleitung