Cisco 7905 serie Bedienungsanleitung
At a Glance
Cisco IP Phone 7905 Series
1Overview
2Connecting Your Cisco IP Phone 7905 Series
3Introducing Your Cisco IP Phone 7905 Series
4Tips for Using Your Phone
5Where to Find More Information
6Safety Notices
2
1Overview
This guide is designed to help you quickly set up and use your
Cisco IP Phone 7905 series. For information on accessing more
complete phone documentation over the Web, see the “Related
Documentation” section on page 9.
2Connecting Your
Cisco IP Phone 7905 Series
Your system administrator or a technician will probably
connect your new Cisco IP Phone to the corporate IP telephony
network. If that is not the case, connecting your phone is easy.
Procedure
Follow the steps below. Refer to Figure 1 to locate ports on the
back of your phone.
Warning
Read the installation instructions before you
connect the system to its power source.
Before You Begin
Verify that your system administrator is ready for you to
connect your Cisco IP Phone to the network.
Be sure to read the “Safety Notices” section on page 9 before
connecting or using your phone.
Step 1 Connect your Cisco IP Phone to the corporate IP
telephony network. Use the Ethernet cable included
with your phone to connect the network port on the
back of your phone to the Ethernet port in your
workspace.
3
Note If your Ethernet cable has a cover over the RJ-45
connector, the cover can cause the phone to be
unsteady, and the phone may rock from side to side.
PullthecablecoverbacktoexposetheRJ-45connector
to avoid this.
Step 2 Connect the handset to the handset port. Ensure that
the end of the cord with the longer uncoiled section is
connected to the body of the phone.
Step 3 Connect the DC power supply connector from the
adaptor to the 5Vdc jack on the back of the phone.
Caution Only use the 5Vdc power adapter that was
provided with the phone.
Step 4 Use the power cord to connect the power supply to a
standard power outlet in your workspace.
After you connect the Cisco IP Phone to its power source, a
start-up process begins. After several minutes, the phone’s LCD
displays a neutral “ready” screen. The details on your screen
might vary, but a ready screen typically displays the date and
time, your extension number, and available soft keys. Startup is
complete and your phone is ready to use.
Tip Soft keys point to feature options displayed along the
bottom of your LCD screen. Soft keys are
flexible—they change depending on the status of your
phone. For example, you can see one set of soft key
options when you pick up the handset, and another set
when the phone is not in use.
4
Figure 1 Cisco IP Phone 7905 Series Cable Connections
1Power cable with wall socket plug
2Power supply with 5Vdc power connector. Only use the
5Vdc power adapter that was provided with the phone.
3Handset port
4Network port (10/100 SW)
72192
3
12
4
5
3Introducing Your
Cisco IP Phone 7905 Series
A Cisco IP Phone 7905 series is a full-feature telephone that
provides voice communication over an IP (Internet Protocol)
network. This phone functions much like a traditional phone,
allowing you to place and receive telephone calls. It also
supports features that you have come to expect from a
telephone—such as speed dialing, redial, and conference calling.
A Road Map to Your Cisco IP Phone 7905
Refer to the following illustration and table to identify the keys
and parts on your Cisco IP Phone 7905 series.
Figure 2 Cisco IP Phone 7905 Series Features
12
ABC
3
DEF
45
JKLGHI
6
MNO
78
TUVPQRS
9
WXYZ
*
0
OPER
#
72193
9
8
7
1 2
43
5
6
6
The main features of your Cisco IP Phone 7905 Series are
defined in the following table.
1LCD screen Displays features such as the time, date,
your phone number, caller ID, line/call
status and soft key tabs.
2Cisco IP Phone
series type Indicates the Cisco IP Phone Series to
which your phone belongs.
3Soft keys Enables you to engage any of the
functions displayed on the
corresponding LCD tabs. Soft key
functionschangedependingonthestatus
of the phone (for example, if the phone
is active or idle).
4Navigation
button Enables you to scroll through text and
select features displayed on the LCD
screen.
5Services button Provides access to phone services (if
available).
6Hold button Places the active call on hold.
7
4Tips for Using Your Phone
Thefollowingsections provide brief instructions for some of the
features available to you.
•How Do I Adjust the Handset Volume?, page 7
•How Do I Adjust the Ringer Volume?, page 8
•How Do I Change the LCD Contrast?, page 8
•How Do I Place a Call on Hold?, page 8
How Do I Adjust the Handset Volume?
To adjust the volume on the handset, press the up or down
Volume button when the handset is in use.
7Dial pad Works exactly like the dial pad on a
traditional telephone.
8Volume button Increases or decreases volume for the
handset. Also controls the ringer volume
(if on-hook).
9Handset with
indicator light Functions like a traditional handset. The
lightstrip atthetop ofthehandset blinks
when the phone rings and remains lit to
indicate a new voice mail message
(depending on your message system).
8
How Do I Adjust the Ringer Volume?
To change the volume used by the ringer, press the up or down
Volume button while the handset is in its cradle. Continue
pressing the Volume button to adjust the volume to the desired
level.
This setting is automatically saved.
How Do I Change the LCD Contrast?
To change the LCD contrast:
Step 1 Press the Services button.
Step 2 Select Settings from the Services menu.
Step 3 Select Contrast from the Settings menu.
Step 4 Press the Up or Down soft keys to set the desired
display contrast.
Step 5 Press the Save soft key to accept your changes.
How Do I Place a Call on Hold?
To place a call on hold, press the Hold button. The Hold button
will light red. To return to the call, press the lit Hold button
again.
Note Because engaging the Hold feature can generate music
or a beeping tone, avoid putting a conference call on
hold.
9
5Where to Find More Information
Your system administrator should be your first point of contact
if you have problems installing or using your
Cisco IP Phone 7905 series.
Related Documentation
User guides and other documentation for your
Cisco IP Phone 7905 series is available on the Web from the
following site:
http://www.cisco.com/univercd/cc/td/doc/product/voice/
c_ipphon/7905_ip/index.htm
6Safety Notices
Pleaseread the following sectionsbeforeinstalling or using your
Cisco IP Phone.
These safety notices apply to phones in the
Cisco IP Phone 7905. For translated versions and compliance
information, refer to the Regulatory Compliance and Safety
Information for the Cisco IP Phone 7905 that is included with
your phone and is accessible via the Web at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/voice/
c_ipphon/7905_ip/7905rcsi.htm
Caution Using a cell or mobile phone in close proximity to
a Cisco IP Phone might cause interference.
Caution Only use the 5Vdc power adapter that was
provided with the phone.
10
Warning Definition
Warning
This warning symbol means
danger
.
You are in a situation that could
causebodilyinjury.Beforeyouwork
on any equipment, be aware of the
hazards involved with electrical
circuitry and be familiar with
standard practices for preventing
accidents. To see translations of the
warnings that appear in this
publication, refer to the
Regulatory
Compliance and Safety Information
document that accompanied this
device.
Waarschuwing
Dit waarschuwingssymbool
betekent gevaar. U verkeert in
een situatie die lichamelijk
letsel kan veroorzaken. Voordat
u aan enige apparatuur gaat
werken, dient u zich bewust te
zijn van de bij elektrische
schakelingen betrokken risico's
en dient u op de hoogte te zijn
van standaard maatregelen om
ongelukken te voorkomen. Voor
vertalingen van de
waarschuwingen die in deze
publicatie verschijnen, kunt u
het document
Regulatory
Compliance and Safety
Information
(Informatie over
naleving van veiligheids- en
andere voorschriften)
raadplegen dat bij dit toestel is
ingesloten.
Inhaltsverzeichnis
Andere Cisco IP-Telefon Handbücher
Cisco
Cisco 8851NR Bedienungsanleitung
Cisco
Cisco Small Business Pro SPA 504G Gebrauchsanweisung
Cisco
Cisco 6901 Standard Bedienungsanleitung
Cisco
Cisco 3911 Bedienungsanleitung
Cisco
Cisco Small Business SPA525G2 Bedienungsanleitung
Cisco
Cisco 7961 Bedienungsanleitung
Cisco
Cisco DX650 Bedienungsanleitung
Cisco
Cisco 7942 Bedienungsanleitung
Cisco
Cisco 7971G-GE - IP Phone VoIP Bedienungsanleitung
Cisco
Cisco SPA 303 Series Bedienungsanleitung
Cisco
Cisco 79 SERIES Bedienungsanleitung
Cisco
Cisco MCS 7800 Series Bedienungsanleitung
Cisco
Cisco SPA 303g Bedienungsanleitung
Cisco
Cisco 7911 Bedienungsanleitung
Cisco
Cisco 9951 Standard Bedienungsanleitung
Cisco
Cisco SPA 501G Bedienungsanleitung
Cisco
Cisco 7962 Bedienungsanleitung
Cisco
Cisco Nexus 7000 Series Bedienungsanleitung
Cisco
Cisco SPA525G - Small Business Pro IP Phone VoIP Bedienungsanleitung
Cisco
Cisco SPA 502G Bedienungsanleitung
