Cisco 7920 - Unified Wireless IP Phone VoIP Bedienungsanleitung

878-16631-01

Getting Started

Before using your Cisco Unified Wireless IP Phone 7920, you need to do the following:

•Checking Shipment Completeness, page 8

•How to Use this Guide, page 8

•Safety Warnings, page 9

•Battery Safety Notices, page 11

•Installing and Removing the Battery, page 12

•Charging the Phone and the Battery, page 13

Checking Shipment Completeness

Check to make sure that all items are present in the Cisco Unified Wireless IP Phone 7920 box.

The package should contain the following:

•Cisco Unified Wireless IP Phone 7920

•Standard battery (Cisco part number: CP-BATT-7920-STD)

•Power supply (Cisco part number: CP-PWR-7920SE-NA)

•Regulatory Compliance and Safety Information for the Cisco Unified Wireless IP Phone 7920

Inform your system manager or supplier if any items are missing.

How to Use this Guide

This guide provides you with an overview of the features that are available on your phone. For

information about common tasks, refer to the following table. Contact your system administrator if

you have problems or need more information about your phone.

If you want to... Then...

Review safety information See the “Safety Warnings” section on page 9.

Install the battery See the “Installing and Removing the Battery” section on page 12.

Charge the battery See the “Charging the Phone and the Battery” section on page 13.

Use your phone Start with the “Overview of the Cisco Unified Wireless IP Phone

7920” section on page 15.

Getting Started

Cisco Unified Wireless IP Phone 7920 for Cisco CallManger Express 3.2 and Later 9

Safety Warnings

These safety notices apply to the Cisco Unified Wireless IP Phone 7920. Please read the following

sections before installing or using your Cisco Unified Wireless IP Phone 7920.

Warning Definition

Warning

This warning symbol means danger. You are in a situation that could cause bodily injury.

Before you work on any equipment, be aware of the hazards involved with electrical

circuitry and be familiar with standard practices for preventing accidents. To see

translations of the warnings that appear in this publication, refer to the translated safety

warnings that accompanied this device.

Set LEAP password See the “Setting the LEAP Username and Password” section on

page 21.

Understand the phone screen See the “Main Screen and Display Indicators” section on page 18.

Make calls See the “Placing Calls” section on page 23.

Change the speaker volume See the “Adjusting the Speaker Volume” section on page 25.

Put calls on hold See the “Placing Calls on Hold” section on page 25.

Transfer calls See the “Transferring Calls” section on page 26.

Mute calls See the “Muting Calls” section on page 24.

Make conference calls See the “Making Conference Calls” section on page 26.

Listen to voice messages See the “Playing Voice Messages” section on page 34.

Set up speed dial See the “Configuring Speed Dial Hot Keys” section on page 32.

Lock and unlock the phone See the “Change Phone Settings” section on page 43

Choose rings for different

conditions

See the “Configuring User Profiles” section on page 37.

Set up a personal phone book See the “Using the Phone Book” section on page 30.

Change ring tones See the “Changing Ring Tone Settings” section on page 43.

Subscribe to phone applications

and services

See the “Subscribing to IP Phone Services” section on page 41.

Get information about phone

accessories

See the “Accessories” section on page 22.

If you want to... Then...

10 78-16631-01

Installation Warning

Warning

Read the installation instructions before connecting the system to the power source.

Product Disposal Warning

Warning

Ultimate disposal of this product should be handled according to all national laws and

regulations.

Lightning Activity Warning

Warning

Do not work on the system or connect or disconnect cables during periods of lightning

activity.

Battery Handling Warning

Warning

There is the danger of explosion if the battery is replaced incorrectly. Replace the battery

only with the same or equivalent type recommended by the manufacturer. Dispose of

used batteries according to the manufacturer’s instructions.

Emergency Services Warning

Warning

This equipment will not be able to access emergency services during a power outage

because of reliance on utility power for normal operation. Alternative arrangements

should be made for access to emergency services. Access to emergency services can be

affected by any call-barring function of this equipment.

Getting Started

Cisco Unified Wireless IP Phone 7920 for Cisco CallManger Express 3.2 and Later 11

Explosive Gas Warning

Warning

The use of the Cisco Unified Wireless IP Phone 7920 in hazardous environments such as

areas where high levels of explosive gas may be present is not recommended. Check

with the site safety engineer before using any type of wireless device in such an

environment.

Battery Disposal Warning

Warning

Do not dispose of the battery pack in fire or water. The battery may explode if placed in

the fire.

Battery Safety Notices

These battery safety notices apply to the batteries that are approved by the Cisco Unified Wireless IP

Phone 7920 manufacturer.

Caution This symbol means reader be careful. In this situation, you might do something that could

result in equipment damage. Refer to the product documentation for instructions.

Caution The battery pack is intended for use only with this device.

Caution Do not disassemble, crush, puncture, or incinerate the battery pack.

Caution To avoid risk of fire, burns, or damage to your battery pack, do not allow a metal object

to touch the battery contacts.

Caution Handle a damaged or leaking battery with extreme care. If you come in contact with the

electrolyte, wash the exposed area with soap and water. If the electrolyte has come in

contact the eye, flush the eye with water for 15 minutes and seek medical attention.

12 78-16631-01

Caution Do not charge the battery pack if the ambient temperature exceeds 104 degrees

Fahrenheit (40 degrees Celsius).

Caution Do not expose the battery pack to high storage temperatures (above 140 degrees

Fahrenheit, 60 degrees Celsius).

Caution When discarding a battery pack, contact your local waste disposal provider regarding

local restrictions on the disposal or recycling of batteries.

Caution To obtain a replacement battery, contact your local dealer. Use only the batteries that have

one of the following Cisco part numbers: CP-BATT-7920-STD (standard battery) or

CP-BATT-7920-EXT (extended use battery).

Caution Use only the power supply that is provided by Cisco. The Cisco part numbers are:

CP-PWR-7920-NA (for North America), CP-PWR-7920-CE (for Central Europe),

CP-PWR-7920-UK (for United Kingdom), CP-PWR-7920-AU (for Australia), and

CP-PWR-7920-JP (for Japan).

To see translations of the warnings that appear in this publication, refer to the Regulatory Compliance

and Safety Information for the Cisco Unified Wireless IP Phone 7920 document that accompanied this

product.

Installing and Removing the Battery

You must install and charge the battery before you can use the Cisco Unified Wireless IP Phone 7920.

To install or remove the battery, follow these steps.

Step 1 To install the battery, insert the two catches of the battery (as shown in Figure 1) in the

corresponding slots near the bottom of the Cisco Unified Wireless IP Phone 7920. Make sure

that the metal contacts on the battery and the phone are facing each other.

Step 2 Press the battery to the body of the phone until it locks into place.

Step 3 To remove the battery, press down on the locking catch of the battery. Then lift and remove

the battery.

Getting Started

Cisco Unified Wireless IP Phone 7920 for Cisco CallManger Express 3.2 and Later 13

Figure 1 Installing and Removing the Battery

Charging the Phone and the Battery

The Cisco Unified Wireless IP Phone 7920 is powered by a rechargeable battery. To charge the battery

when it is installed in the phone, follow these steps:

1. Connect the cable from the power supply to the base of the phone.

2. Connect the power supply to an AC wall outlet as shown in Figure 2.

1Locking catch—Press to release the battery.

2Catches—Insert these into the slots near the bottom of the phone at battery installation.

3Metal contact—Match the contact on the battery to the contact on the phone.

79675

14 78-16631-01

Figure 2 Charging the Phone and the Battery

If the phone is turned off, the screen displays the message “Battery Charging.” When the battery

is fully charged, the “Charging Complete” message is displayed, as shown in Figure 3.

Figure 3 Charging Battery Messages

If the phone is turned on, the battery indicator bar blinks, displaying the current power level.

When the battery is fully charged, the battery indicator bar stops blinking.

3. When the battery is fully charged, disconnect the charger from the phone, and unplug the power

cord from the AC wall outlet.

•The standard battery requires about 3.5 hours to become fully charged and provides up

to 3.5 hours of talk time or 21 hours of standby time.

•The extended battery provides up to 4.25 hours of talk time or 30 hours of standby time.

The battery becomes fully charged in about 4.5 hours. For more information about

charging the battery, refer to the “Desktop Charger” section in the Cisco Unified Wireless

IP Phone 7920 Accessory Guide.

7920

ABC

DEF

JKL

MNO

GHI

TUV

WXYZ

PQRS

79676

Andere Handbücher für 7920 - Unified Wireless IP Phone VoIP

Inhaltsverzeichnis

Andere Cisco IP-Telefon Handbücher

Cisco

Cisco Cisco Access Registrar 4.2 Gebrauchsanweisung

Cisco

Cisco 6901 Standard Bedienungsanleitung

Cisco

Cisco SPA501 Bedienungsanleitung

Cisco

Cisco 6945 Series Bedienungsanleitung

Cisco

Cisco 8800 Series Bedienungsanleitung

Cisco

Cisco WIP310 - iPhone Wireless VoIP Phone Bedienungsanleitung

Cisco

Cisco DATAVOX 7941 Bedienungsanleitung

Cisco

Cisco Cisco Unified IP Phone 7960G Bedienungsanleitung

Cisco

Cisco 8811 Bedienungsanleitung

Cisco

Cisco 8851 Bedienungsanleitung

Cisco

Cisco 7920 - Unified Wireless IP Phone VoIP Bedienungsanleitung

Cisco

Cisco 7800 Series Bedienungsanleitung

Cisco

Cisco SPA525G - Small Business Pro IP Phone VoIP Bedienungsanleitung

Cisco

Cisco 8845 Bedienungsanleitung

Cisco

Cisco 8811 Bedienungsanleitung

Cisco

Cisco CP-7962G Bedienungsanleitung

Cisco

Cisco 7942G - Unified IP Phone VoIP Bedienungsanleitung

Cisco

Cisco 8800 Series Bedienungsanleitung

Cisco

Cisco IP 7925 Bedienungsanleitung

Cisco

Cisco SPA525 Series Bedienungsanleitung

Cisco

Cisco Cisco 7960 Bedienungsanleitung

Cisco

Cisco CP-7942G Bedienungsanleitung

Cisco

Cisco 7911 Bedienungsanleitung

Cisco

Cisco 79 SERIES Installationsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung

Nortel

Nortel i2050 Bedienungsanleitung

Fiberme

Fiberme FAP260 Series Bedienungsanleitung