Cisco 7941G - Unified IP Phone VoIP Bedienungsanleitung

Cisco Unified IP Phone Settings

•Phone Settings Overview, page 1

•Cisco Unified IP Phone Menus, page 1

•Phone Setup Options, page 4

•Network Configuration Menu, page 6

•Device Configuration Menu, page 26

•Security Configuration Menu, page 50

Phone Settings Overview

Cisco Unified IP Phones include many configurable network and device settings that you may need to modify

before the phone is functional for your users. You can access these settings, and change many of them, through

menus on the phone.

Cisco Unified IP Phone Menus

The Cisco Unified IP Phone includes the following configuration menus:

•Network Configuration: Provides options for viewing and making a variety of network settings.

•Device Configuration: Provides access to sub-menus from which you can view a variety of non

network-related settings.

•Security Configuration: Provides options for displaying and modifying security settings.

Before you can change option settings on the Network Configuration menu, you must unlock options for

editing.

You can control whether a phone user has access to phone settings by using the Settings Access field in the

Cisco Unified Communications Manager Administration Phone Configuration window.

Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified

Communications Manager 9.0 (SCCP and SIP)

Display Settings Menu

To display a configuration menu, perform the following steps.

You can control whether a phone has access to the Settings menu or to options on this menu by using the

Settings Access field in the Cisco Unified Communications Manager Administration Phone Configuration

window. The Settings Access field accepts these values:

Note

•Enabled—Allows access to the Settings menu.

•Disabled—Prevents access to the Settings menu.

•Restricted—Allows access to the User Preferences menu and allows volume changes to be saved.

Prevents access to other options on the Settings menu.

If you cannot access an option on the Settings menu, check the Settings Access field.

Procedure

Step 1 Press Settings to access the Settings menu.

Step 2 Perform one of these actions to display the desired menu:

•Use the Navigation pad to select the desired menu and then press the Select.

•Use the keypad on the phone to enter the number that corresponds to the menu.

Step 3 To display a submenu, repeat Step 2.

Step 4 To exit a menu, press Exit.

Related Topics

Unlock and Lock Options, on page 2

Value Input Guidelines, on page 3

Phone Setup Options, on page 4

Network Configuration Menu, on page 6

Device Configuration Menu, on page 26

Unlock and Lock Options

Configuration options that can be changed from a phone are locked by default to prevent users from making

changes that could affect the operation of a phone. You must unlock these options before you can change

them.

Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco

Unified Communications Manager 9.0 (SCCP and SIP)

Cisco Unified IP Phone Settings

Display Settings Menu

When options are inaccessible for modification, a locked padlock icon appears on the configuration menus.

When options are unlocked and accessible for modification, an unlocked padlock icon appears on these

menus.

To unlock or lock options, press **#. This action either locks or unlocks the options, depending on the previous

state.

If a Settings Menu password has been provisioned, SIP Phones present an “Enter password”prompt after

you enter **#.

Note

Make sure to lock options after you have made your changes.

Do not press **# to unlock options and then immediately press **# again to lock options. The phone

interprets this sequence as **#**, which resets the phone. To lock options after unlocking them, wait at

least 10 seconds before you press **# again.

Caution

Related Topics

Display Settings Menu, on page 2

Value Input Guidelines, on page 3

Phone Setup Options, on page 4

Network Configuration Menu, on page 6

Device Configuration Menu, on page 26

Value Input Guidelines

When you edit the value of an option setting, follow these guidelines:

•Use the keys on the keypad to enter numbers and letters.

•To enter letters by using the keypad, use a corresponding number key. Press the key one or more times

to display a particular letter. For example, press the 2key once for “a,”twice quickly for “b,”and three

times quickly for “c.”After you pause, the cursor automatically advances to allow you to enter the next

letter.

•To enter a period (for example, in an IP address under IPv4 Configurations), press the .(period) softkey

or press *on the keypad.

•To enter a colon (for example, in an IP address under IPv6 Configurations), press the : (colon) softkey

or press * on the keypad.

•Press the << softkey if you make a mistake. This softkey deletes the character to the left of the cursor.

•Press Cancel before pressing the Save softkey to discard any changes that you have made.

The Cisco Unified IP Phone provides several methods that you can use to reset or restore option settings,

if necessary.

Note

Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified

Communications Manager 9.0 (SCCP and SIP)

Cisco Unified IP Phone Settings

Value Input Guidelines

Related Topics

Display Settings Menu, on page 2

Unlock and Lock Options, on page 2

Phone Setup Options, on page 4

Network Configuration Menu, on page 6

Device Configuration Menu, on page 26

Security Configuration Menu, on page 50

Cisco Unified IP Phone Reset or Restore

Phone Setup Options

The settings that you can change on a phone fall into several categories, as shown in the following table. For

a detailed explanation of each setting and instructions for changing them, see Network Configuration Menu,

on page 6.

There are several options on the Network Configuration menu and on the Device Configuration Menu

that are for display only or that you can configure from Cisco Unified Communications Manager. These

options are also described in this chapter.

Note

Table 1: Settings Configurable from the Phone

Network Configuration Menu OptionDescriptionCategory

General Network Settings

Admin. VLAN ID

PC VLAN

Admin. VLAN ID allows you to

change the administrative VLAN

used by the phone. PC VLAN allows

the phone to interoperate with

third-party switches that do not

support a voice VLAN.

VLAN settings

SW Port ConfigurationAllows you to set the speed and

duplex of the network and access

ports.

Port settings

PC Port Configuration

IPv4 Network Settings

DHCPDynamic Host Configuration

Protocol (DHCP) automatically

assigns IP address to devices when

you connect them to the network.

Cisco Unified IP Phones enable

DHCP by default.

DHCP settings

DHCP Address Released

Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco

Unified Communications Manager 9.0 (SCCP and SIP)

Cisco Unified IP Phone Settings

Phone Setup Options

Network Configuration Menu OptionDescriptionCategory

Domain NameIf you do not use DHCP in your

network, you can make IP settings

manually.

IP settings

IP Address

Subnet Mask

Default Router 1-5

DNS Server 1-5

Alternate TFTPIf you do not use DHCP to direct the

phone to a TFTP server, you must

manually assign a TFTP server. You

can also assign an alternative TFTP

server to use instead of the one

assigned by DHCP.

TFTP settings for

TFTP IPv4 servers

TFTP Server 1

TFTP Server 2

IPv6 Network Settings

DHCPv6Dynamic Host Configuration

Protocol (DHCP) automatically

assigns IP address to devices when

you connect them to the network.

Cisco Unified IP Phones enable

DHCP by default.

DHCP settings

DHCPv6 Address Released

Domain NameIf you do not use DHCP in your

network, you can make IP settings

manually.

IP settings

IPv6 Address

IPv6 Prefix Length

IPv6 DNS Server 1-2

IPv6 Alternate TFTPIf you do not use DHCP to direct the

phone to a TFTP server, you must

manually assign a TFTP server. You

can also assign an alternative TFTP

server to use instead of the one

assigned by DHCP.

TFTP settings for

TFTP IPv6 servers

(SCCP phones only) IPv6 TFTP Server 1

IPv6 TFTP Server 2

Related Topics

Display Settings Menu, on page 2

Unlock and Lock Options, on page 2

Value Input Guidelines, on page 3

Network Configuration Menu, on page 6

Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified

Communications Manager 9.0 (SCCP and SIP)

Cisco Unified IP Phone Settings

Phone Setup Options

Device Configuration Menu, on page 26

Network Configuration Menu

The Network Configuration menu provides options for viewing and making a variety of network settings.

The following tables describe these options and, where applicable, explain how to change them.

For information about how to access the Network Configuration menu, see Display Settings Menu, on page

The phone also has a Network Configuration menu that you access directly from the Settings menu. For

information about the options on that menu, see the table below.

Note

Before you can change an option on this menu, you must unlock options as described in the Unlock and Lock

Options, on page 2. The Edit,Yes, or No softkeys for changing network configuration options appear only

if options are unlocked.

For information about the keys you can use to edit options, see Value Input Guidelines, on page 3.

Table 2: Network Configuration Menu Options

To ChangeDescriptionOption

Set IPv4 Configuration Fields,

on page 16

Internet Protocol v4 address menu.

In the IPv4 Configuration menu, you can do

the following:

•Enable or disable the phone to use the

IPv4 address that is assigned by the

DHCPv4 server.

•Manually set the IPv4 Address, Subnet

Mask, Default Routers, DNSv4 Server,

and Alternate TFTP servers for IPv4.

For more information on the IPv4 address

fields, see the specific field within this table.

IPv4 Configuration

Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco

Unified Communications Manager 9.0 (SCCP and SIP)

Cisco Unified IP Phone Settings

Network Configuration Menu

To ChangeDescriptionOption

Set IPv6 Configuration Fields,

on page 17

Internet Protocol v6 address menu.

In the IPv6 Configuration menu, you can do

the following:

•Enable or disable the phone to use the

IPv6 address that is assigned by the

DHCPv6 server or to use the IPv6 address

that it acquires through Stateless Address

Autoconfiguration (SLAAC).

•Manually set the IPv6 Address, Subnet

Prefix Length, DNSv6 Server, and IPv6

TFTP Servers.

For more information on the IPv6 address

fields, see IPv6 Configuration Menu Options.

For more information on SLAAC, see

Deploying IPv6 in Unified Communications

Networks with Cisco Unified Communications

Manager, located at http://www.cisco.com/en/

US/docs/voice_ip_comm/cucm/srnd/ipv6/

ipv6srnd.html.

IPv6 Configuration

Display only—Cannot configure.

Unique Media Access Control (MAC) address

of the phone.

MAC address

Display only—Cannot configure.

Unique host name that the DHCP server

assigned to the phone.

Host Name

Set Domain Name Field, on page

Name of the Domain Name System (DNS)

domain in which the phone resides.

If the phone receives different domain

names from the DHCPv4 and

DHCPv6 servers, the domain name

from the DHCPv6 will take

precedence.

Note

Domain Name

The phone obtains its Operational

VLAN ID via Cisco Discovery

Protocol (CDP) from the switch

to which the phone is attached.

To assign a VLAN ID manually,

use the Admin VLAN ID option.

Auxiliary Virtual Local Area Network (VLAN)

configured on a Cisco Catalyst switch in which

the phone is a member.

If the phone has not received an auxiliary

VLAN, this option indicates the Administrative

VLAN.

If neither the auxiliary VLAN nor the

Administrative VLAN are configured, this

option is blank.

Operational VLAN ID

Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified

Communications Manager 9.0 (SCCP and SIP)

Cisco Unified IP Phone Settings

Network Configuration Menu

To ChangeDescriptionOption

Set Admin VLAN ID Field, on

page 18

Auxiliary VLAN in which the phone is a

member.

Used only if the phone does not receive an

auxiliary VLAN from the switch; otherwise it

is ignored.

Admin. VLAN ID

Set SW Port Configuration Field,

on page 18

Speed and duplex of the network port. Valid

values:

•autonegotiate

•10 Half—10-BaseT/half duplex

•10 Full—10-BaseT/full duplex

•100 Half—100-BaseT/half duplex

•100 Full—100-BaseT/full duplex

•1000 Full—1000-BaseT/full duplex

If the phone is connected to a switch, configure

the port on the switch to the same speed/duplex

as the phone, or configure both to

auto-negotiate.

If you change the setting of this option, you

must change the PC Port Configuration option

to the same setting.

SW Port Configuration

Set PC Port Configuration Field,

on page 18

Speed and duplex of the access port. Valid

values:

•autonegotiate

•10 Half—10-BaseT/half duplex

•10 Full—10-BaseT/full duplex

•100 Half—100-BaseT/half duplex

•100 Full—100-BaseT/full duplex

•1000 Full—1000-BaseT/full duplex

If the phone is connected to a switch, configure

the port on the switch to the same speed/duplex

as the phone, or configure both to

auto-negotiate.

If you change the setting of this option, you

must change the SW Port Configuration option

to the same setting.

PC Port Configuration

Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco

Unified Communications Manager 9.0 (SCCP and SIP)

Cisco Unified IP Phone Settings

Network Configuration Menu

To ChangeDescriptionOption

Set PC VLAN Field, on page 19Allows the phone to interoperate with

third-party switches that do not support a voice

VLAN. The Admin VLAN ID option must be

set before you can change this option.

PC VLAN

Display only—Cannot configure.

Shows the virtual private network (VPN) Client

state:

•Connected

•Not Connected

(Supported only for the Cisco Unified IP Phone

7942G, and 7962G.)

VPN

The following table describes the IPv4 configuration menu options.

Table 3: IPv4 Configuration Menu Options

To ChangeDescriptionOption

Set DHCP Field, on page 19Indicates whether the phone has DHCP

enabled or disabled.

When DHCP is enabled, the DHCP server

assigns the phone anIPv4 address. When

DHCP is disabled, you manually assign

an IPv4 address to the phone.

DHCP

Set IP Address Field, on page 19Internet Protocol version 4 (IPv4) address

of the phone.

If you assign an IPv4 address with this

option, you must also assign a subnet

mask and default router. See Subnet Mask

and Default Router 1 options in this table.

IP Address

Set Subnet Mask Field, on page 20Subnet mask used by the phone.Subnet Mask

Set Default Router Fields, on page 20Default router used by the phone (Default

Router 1) and optional backup routers

(Default Router 2–5).

Default Router 1

Default Router 2

Default Router 3

Default Router 4

Default Router 5

Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified

Communications Manager 9.0 (SCCP and SIP)

Cisco Unified IP Phone Settings

Network Configuration Menu

To ChangeDescriptionOption

Set DNS Server Fields, on page 20Primary Domain Name System (DNS)

server (DNS Server 1) and optional

backup DNS servers (DNS Server 2–5)

used by the phone.

DNS Server 1

DNS Server 2

DNS Server 3

DNS Server 4

DNS Server 5

Display only—Cannot configure.

IP address of the Dynamic Host

Configuration Protocol (DHCP) server

from which the phone obtains its IPv4

address.

DHCP Server

Set DHCP Address Released Field, on

page 21

Releases the IPv4 address assigned by

DHCP.

DHCP Address

Released

Set Alternate TFTP Field, on page 21Indicates whether the phone is using an

alternative TFTP server.

Alternate TFTP

Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco

Unified Communications Manager 9.0 (SCCP and SIP)

Cisco Unified IP Phone Settings

Network Configuration Menu

Andere Handbücher für 7941G - Unified IP Phone VoIP

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco IP-Telefon Handbücher

Cisco

Cisco 7841 Referenzhandbuch

Cisco

Cisco SPA300 Series Bedienungsanleitung

Cisco

Cisco 8821 Bedienungsanleitung

Cisco

Cisco 7970 Series Bedienungsanleitung

Cisco

Cisco 7945 Series Bedienungsanleitung

Cisco

Cisco SPA525G - Small Business Pro IP Phone VoIP Bedienungsanleitung

Cisco

Cisco 7821 Bedienungsanleitung

Cisco

Cisco 8800 Series Bedienungsanleitung

Cisco

Cisco Cisco 7960 Bedienungsanleitung

Cisco

Cisco 8832 Bedienungsanleitung

Cisco

Cisco 7931G - Unified IP Phone VoIP Bedienungsanleitung

Cisco

Cisco IP Phone 7800 Series Bedienungsanleitung

Cisco

Cisco Unified 8961 Bedienungsanleitung

Cisco

Cisco Cisco 7940 Gebrauchsanweisung

Cisco

Cisco Small Business SPA922 Bedienungsanleitung

Cisco

Cisco Unified 8961 Betriebsanleitung

Cisco

Cisco Small Business Pro SPA 504G Bedienungsanleitung

Cisco

Cisco Small Business Pro SPA 504G Bedienungsanleitung

Cisco

Cisco 3905 Bedienungsanleitung

Cisco

Cisco DATAVOX 7941 Referenzhandbuch

Cisco

Cisco Unified 8961 Bedienungsanleitung

Cisco

Cisco 6851 Bedienungsanleitung

Cisco

Cisco Small Business SPA525G2 Bedienungsanleitung

Cisco

Cisco 7821 Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung

Nortel

Nortel i2050 Bedienungsanleitung

Fiberme

Fiberme FAP260 Series Bedienungsanleitung