Cisco IP Phone 7800 Series Bedienungsanleitung

Andere Handbücher für IP Phone 7800 Series

1

Dieses Handbuch passt für folgende Modelle

1

Andere Cisco IP-Telefon Handbücher

Cisco

Cisco 8832 Leitfaden

Cisco

Cisco 8831 Bedienungsanleitung

Cisco

Cisco 7931G - Unified IP Phone VoIP Bedienungsanleitung

Cisco

Cisco 7931G - Unified IP Phone VoIP Bedienungsanleitung

Cisco

Cisco 7925G - Unified Wireless IP Phone VoIP Bedienungsanleitung

Cisco

Cisco Cisco 7960 Bedienungsanleitung

Cisco

Cisco 7821 Bedienungsanleitung

Cisco

Cisco 7911 Bedienungsanleitung

Cisco

Cisco SPA525G - Small Business Pro IP Phone VoIP Bedienungsanleitung

Cisco

Cisco IP 7970 Series Bedienerhandbuch

Cisco

Cisco CP-7921G-A-K9 Bedienungsanleitung

Cisco

Cisco 8945 Technisches Datenblatt

Cisco

Cisco 7906G - Unified IP Phone VoIP Bedienungsanleitung

Cisco

Cisco UNIFIED 9971 Bedienungsanleitung

Cisco

Cisco CP-7821 Bedienungsanleitung

Cisco

Cisco Unified 8961 Bedienungsanleitung

Cisco

Cisco 7925G - Unified Wireless IP Phone VoIP Bedienungsanleitung

Cisco

Cisco Unified 6921 Bedienungsanleitung

Cisco

Cisco 7841 Bedienungsanleitung

Cisco

Cisco 7821 Bedienungsanleitung

Cisco

Cisco 6921G Bedienungsanleitung

Cisco

Cisco 9951 Standard Bedienungsanleitung

Cisco

Cisco 524SG - Unified IP Phone VoIP Bedienungsanleitung

Cisco

Cisco 8941 Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung

Nortel

Nortel i2050 Bedienungsanleitung

Fiberme

Fiberme FAP260 Series Bedienungsanleitung

●

●

●

Configure Static Internet Protocol (IP)

Address Settings on a Cisco IP Phone 7800

or 8800 Series Multiplatform Phone

Objective

By default, a Cisco IP Phone 7800 or 8800 Series Multiplatform Phone is assigned its IP

address through Dynamic Host Configuration Protocol (DHCP). The network device that

manages the phone chooses the IP address that the IP phone will use. The same IP phone

may or may not have a different IP address every time it connects to the network. In order for

an IP phone to have the same IP address each time it connects to the network, DHCP can

be disabled and an IP phone can be manually assigned a static IP address. With a single IP

address, configuration is easier because it provides a single known IP to access with, while a

dynamic IP makes it harder to locate and gain access to configure the phone.

The static IP address of the Cisco IP Phone 7800 or 8800 Series Multiplatform Phone can be

manually configured through the web-based utility or the Graphical User Interface (GUI). You

must configure the IP address, subnet mask, Domain Name System (DNS) server, and

default router settings manually on the phone.

This article provides instructions on how to configure the static IP address of the Cisco IP

Phone 7800 or 8800 Series Multiplatform Phone through the GUI or the web-based utility.

Applicable Devices

7800 Series

8800 Series

Software Version

11.0

Configure the Static IP Address Settings of the IP Phone

Configure Static IP Address Through the Web-based Utility

In this scenario, the Cisco IP Phone 8861 Multiplatform Phone is set up without the

availability of a DHCP server. Follow the steps below to configure a static IP address through

the web-based utility of the IP Phone:

Step 1. Access the web-based utility of your IP Phone then log in as Admin.

Note: To learn how to configure the password on your 7800 or 8800 Series Multiplatform

Phone, click here.

Step 2. Click Voice > System.

Step 3. In the IPv4 Settings area, choose Static IP from the Connection Type drop-down list.

Step 4. Enter the IP address of the IP Phone in the Static IP field.

Note: In this example, 192.168.100.116 is used.

Step 5. Enter the gateway address in the Gateway field.

Note: In this example, 192.168.100.1 is used.

Step 6. Enter the subnet mask in the NetMask field.

Note: In this example, 255.255.255.0 is used.

Step 7. Enter the primary DNS address in the Primary DNS field.

Note: In this example, 192.168.100.1 is used.

Step 8. (Optional) Enter the secondary DNS address in the Secondary DNS field. In this

scenario, the Secondary DNS is left blank.

Step 9. Click Submit All Changes.

The phone will apply the configuration settings and you will be redirected to the web-based

utility page after the update.

Step 10. (Optional) To verify that the configured settings have been applied, log in to the

web-based utility of your IP Phone then choose Info > Status. The IPv4 Information area

should display the updated configuration settings.

You should now have successfully configured the static IP address settings on your Cisco IP

Phone through the web-based utility.

Configure Static IP Address Through the GUI

Step 1. Press the Settings button on your IP Phone.

Step 2. Choose Network Configuration using the circle navigation button.

Step 3. Choose IPv4 address settings.

Step 4. Press the left or right arrows of the navigation button to choose Static IP.

Step 5. Enter the IP address of the IP Phone in the Static IP address field.

Note: In this example, the IP address is 192.168.100.116.

Step 6. Enter the subnet mask in the Subnet mask field.

Note: In this example, the subnet mask is 255.255.255.0.

Step 7. Enter the gateway address in the Gateway address field.

Note: In this example, the gateway address used is 192.168.100.1.

Step 8. Enter the primary DNS address in the DNS 1 field.

Note: In this example, the primary DNS used is 192.168.100.1.

Step 9. (Optional) Enter the secondary DNS address in the DNS 2 field. In this scenario, the

Secondary DNS is left blank.

Step 10. (Optional) Press the left or right arrows of the navigation button to toggle the

DHCP address released setting to On or Off. The default setting is Off.

Step 11. Press the Set softkey to apply the configuration settings on your IP Phone.

The GUI will display a message that configuration settings are being applied to the IP Phone.

Step 12. (Optional) To verify that the configured settings have been applied, press the

button on your IP Phone then choose Status > Network Status. The Network status page

should display the updated configuration settings.

You should now have successfully configured the static IP address settings through the GUI

of your Cisco 7800 or 8800 Multiplatform IP Phone.