Cisco Unified IP Phone Expansion Module 7915 Bedienungsanleitung

Americas Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

http://www.cisco.com

Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 527-0883

Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or

trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other

countries. All other trademarks mentioned in this document or Website are the property of their

respective owners. The use of the word partner does not imply a partnership relationship between

Cisco and any other company. (0705R)

OL-16465-01

QUICK REFERENCE

Cisco Unified IP Phone 7915

and 7916 Expansion Module

for

Cisco Unified

Communications Manager

Express 4.3

and Later Versions

Cisco Unified IP Phone Expansion Module

7915 and 7916 attaches to your Cisco Unified

IP Phone 7962G, 7965G or 7975G, adding up

to 24 extra line appearances or programmable

buttons to your phone. The Cisco Unified IP

PhoneExpansionModule 7915 has a grayscale

display and the Cisco Unified IP Phone

Expansion Module 7916 has a color display.

Attaching a second Expansion Module to your

Cisco Unified IP Phone adds a total of 56 extra

line appearances or programmable buttons to

your phone.

Feature Function

1LCD screen Displays the phone number,

speed dial number (or name

or other text label), phone

service, phone feature, or

Privacy assigned to each

button. Icons indicating line

status appear similar to, and

function the same as, those

on the Cisco Unified IP

Phone to which it is

attached.

187195

1 2

204203

2Twelve

buttons Each button corresponds to

one line. The light beneath

each button indicates the

state of the corresponding

line, as follows:

• Line available: Light off

• Line in use by you: Light

steady green

• Line in use by someone

else: Light steady red

• Line ringing: Light

flashing amber

• Call on hold: Light

flashing green

• Call is being transferred:

Light steady green

3Shift

Buttons—2

buttons. Each

button

correspondsto

one page of 12

line keys. Page

one is labeled

with the

number 1 and

page two is

labeled with

the number 2.

The lights beneath each

button indicate the state of

the page as follows:

• Page is active: Steady

green light

• Page is inactive: Light

off

• Call is ringing on an

inactive page: Flashing

amber light.

• Call on hold on an

inactive page: Flashing

amber light

Feature Function Basic Call Functions

All call functions, such as answering a call, placing

a call on hold, transferring a call, call waiting, and

so on, are performed from the Cisco Unified IP

Phone 7962G. See Cisco Unified IP Phones 7942G

and 7962G for Cisco Unified Communications

Manager Express 4.3, for instructions on using the

Cisco Unified IP phone.

Note If the buttons for Expansion Module 7915

and 7916 are configured as phone

features, users can perform phone

functions fom the Expansion Module.

Adjust the Display Contrast or Brightness

As with the Cisco Unified IP Phones

7962G/7965/7975, you can adjust the contrast on

the display of the Cisco Unified IP Phones 7915

and 7916 Expansion Module.

To adjust the contrast, follow these steps:

1. On the Cisco Unified IP Phone (7962, 7965,

7975) press the Settings button.

2. Select Contrast, and press the Select soft key.

3. Select Expansion Module(s) from the Contrast

menu. The Expansion Module 1 Contrast

screen appears.

Program Speed-Dial Buttons

When an administrator has defined one or more

speed-dial instances for a Cisco Unified IP phone,

you can reprogram numbers that are not locked or

can program numbers into an instance that has an

empty dial string:

1. Select an available phone line by pressing the

NewCall soft key or by pressing a line button.

Listen for the dial tone.

2. Press the pound key (#).

3. Press the speed-dial button to program. A

short beep confirms that you are starting to

program this button.

4. Enter the speed-dial number. The digits appear

on the phone display. When you are entering

speed-dial numbers, use the backspace (<<)

soft key to erase digits that you entered

incorrectly.

To remove a speed-dial number without

replacing it with a new one, press the pound

key (#).

5. Hang up the handset, or press a new speed-dial

button and repeat the process to program

additional speed-dial buttons.

Transfer a Call

To transfer an incoming call, press the Trnsfer soft

key followed by the Line button of the extension to

which you want to transfer the call. Whena transfer

is invoked using this mechanism, it is always invoked

as a blind transfer.

Line status is indicated as follows:

• An idle line displays an on-hook phone icon.

• A line that is in use displays the phone icon

with a flashing amber light.

• A line with messages displays a flashing

envelope icon.

Keeping Your Call Information Private

If Privacy is programmed for one of your buttons,

you can keep your call information private from

users who share your lines. If you see a button

labeled “Privacy,” then this feature has been

enabled for you by your system administrator.

You can toggle privacy on and off by pressing the

Privacy button when receiving an incoming call. In

addition, with Privacy enabled, other shared lines

are blocked from joining your calls.

For more information, see Cisco Unified IP Phones

7942G and 7962G for Cisco Unified

Communications Manager Express 4.3

For More Information

For additional information on using your

Cisco Unified IP phone, consult your local system

administrator.

Andere Handbücher für Unified IP Phone Expansion Module 7915

Dieses Handbuch passt für folgende Modelle

Andere Cisco IP-Telefon Handbücher

Cisco

Cisco MCS 7800 Series Bedienungsanleitung

Cisco

Cisco 7941G - Unified IP Phone VoIP Bedienungsanleitung

Cisco

Cisco 6800 Series Bedienungsanleitung

Cisco

Cisco 6945 Series Bedienungsanleitung

Cisco

Cisco 8800 Series Bedienungsanleitung

Cisco

Cisco 7965 Einrichtungshandbuch

Cisco

Cisco 8800 Series Bedienungsanleitung

Cisco

Cisco 8945 Technisches Datenblatt

Cisco

Cisco 8800 Series Bedienungsanleitung

Cisco

Cisco 7931G - Unified IP Phone VoIP Bedienungsanleitung

Cisco

Cisco Cisco Unified IP Phone 7960G Bedienungsanleitung

Cisco

Cisco 9645 Bedienungsanleitung

Cisco

Cisco 7965G - Unified IP Phone VoIP Bedienungsanleitung

Cisco

Cisco 7841 Bedienungsanleitung

Cisco

Cisco Cisco 7960 Bedienungsanleitung

Cisco

Cisco 7975G - Unified IP Phone VoIP Bedienungsanleitung

Cisco

Cisco 8832 Bedienungsanleitung

Cisco

Cisco Poly TRIO C60 Bedienungsanleitung

Cisco

Cisco 9971 Standard Bedienungsanleitung

Cisco

Cisco 7920 - Unified Wireless IP Phone VoIP Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Cisco

Cisco 7945 Series Bedienungsanleitung

Cisco

Cisco 7911 Bedienungsanleitung

Cisco

Cisco 7961G - IP Phone VoIP Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung

Nortel

Nortel i2050 Bedienungsanleitung

Fiberme

Fiberme FAP260 Series Bedienungsanleitung