Cisco EHWIC-4SHDSL-EA Merkblatt

Cisco Systems, Inc.

www.cisco.com

Configuring Cisco Multimode G.SHDSL

EFM/ATM in Cisco ISR G2

OL-24505-04

Last Updated: October 14, 2013

This document describes how to configure Cisco G.SHDSL Ethernet in the first mile (EFM) and

Asynchronous Transfer Mode (ATM). Cisco G.SHDSL EFM/ATM Enhanced high-speed WAN interface

card (EHWIC) connect Cisco Integrated Services Routers Generation 2 (ISR G2s) with central office

Digital Subscriber Line Access Multiplexers (DSLAMs) and provide up to four lines of G.SHDSL

(ITU-T 991.2) connectivity. The C888EA provides four pairs of multimode G.SHDSL connectivity.

There is one EHWIC model and one fixed platform model:

•EHWIC-4SHDSL-EA—A double-wide multimode EHWIC G.SHDSL, 4 pair, 802.3ah, EFM and

ATM mode interface card

•C888EA—A multimode G.SHDSL, 4 pair 802.3ah, EFM and ATM mode fixed platform

Finding Support Information for Platforms and Cisco IOS Software Images

Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image

support. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on

Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at

the login dialog box and follow the instructions that appear.

Contents

This document shows the configuration process for the EHWIC-4SHDSL-EA multimode EFM and ATM

card and the C888EA EFM and ATM mode fixed platform.

•Prerequisites for Cisco G.SHDSL EFM/ATM EHWICs, page 2

•Information About Cisco G.SHDSL EFM/ATM, page 2

•Connecting Cisco G.SHDSL EFM/ATM to the Network, page 4

•Configuring Cisco G.SHDSL EFM/ATM, page 4

•Troubleshooting Cisco G.SHDSL EFM/ATM, page 26

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2

Prerequisites for Cisco G.SHDSL EFM/ATM EHWICs

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2

•Firmware Update, page 45

•Command Reference, page 49

•Additional References, page 81

Prerequisites for Cisco G.SHDSL EFM/ATM EHWICs

•Ensure that you have the appropriate Cisco router to serve as the host router.

The following Cisco routers support Cisco G.SHDSL EFM/ATM EHWICs:

–

Cisco 1921 ISR

–

Cisco 1941 ISR

–

Cisco 2901 ISR

–

Cisco 2911 ISR

–

Cisco 2921 ISR

–

Cisco 2951 ISR

–

Cisco 3925 ISR

–

Cisco 3925-E ISR

–

Cisco 3945 ISR

–

Cisco 3945-E ISR

•Use the show version command to ensure that the router is running the correct IOS software. The

C888EA and EHWIC-4SHDSL-EA models require Cisco IOS Release Release: <optional, example:

Cisco IOS Release 15.1(1)T> or later.

Note When minimum release requirements are met, you can change images on the router without

affecting performance.

•Install the Cisco G.SHDSL EFM/ATM EHWIC on the router, using the directions provided in Cisco

Interface Cards Hardware Installation Guide and Cisco Network Modules and Interface Cards

Regulatory Compliance and Safety Information.

Information About Cisco G.SHDSL EFM/ATM

Cisco G.SHDSL EFM/ATM EHWICs support up to four pairs of digital subscriber lines (DSL). The

fixed platform model (C888EA) also supports up to four pairs. The DSL pairs are bundled in groups and

configured in the Cisco IOS command-line interface (CLI) by using the dsl-group command. Selecting

the mode is done by using the mode command.

See the “Command Reference” section on page 49 for more information about commands used with

Cisco G.SHDSL EFM/ATM.

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2

Information About Cisco G.SHDSL EFM/ATM

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2

Cisco G.SHDSL EFM/ATM

The Cisco EHWIC-4SHDSL-EA provides up to four lines of connectivity through one RJ-45 connector

(see Figure 1), in EFM or ATM modes. The Cisco 888EA fixed platform (see Figure 2) supports up to

four lines of connectivity through one RJ-45 connector, in EFM or ATM modes.

Note The C888EA and the Cisco EHWIC-4SHDSL-EA support the Dying Gasp feature. The term dying gasp

refers to power status as defined in ITU-T standard G.991.2, section 7.1.2.5.3.

Figure 1 Cisco EHWIC-4SHDSL-EA EFM/ATM Faceplate

Figure 2 Cisco 888EA Faceplate

255037

SHDSL

EHWIC-

4SHDSL-EA

EN/LP

EFM ATM

SEE MANUAL BEFORE

INSTALLATION

RJ45 CONNECTOR ONLY

L3 L2 L1 L0

EN/LP Status of the system:

Green—Operating system is running.

Amber—Loopback mode.

EFM Green—Indicates EFM mode.

ATM Green—Indicates ATM mode.

L0, L1, L2, L3 Status of link:

Green on—Link is active.

Off—Link is inactive or not configured.

Amber—Link alarm.

Blinking green—Link is training. Slow blinking indicates Inverse Multiplexing

Over ATM (IMA) link training. Fast blinking indicates non-IMA link training.

Amber and green blinking simultaneously—Loopback mode. EN/LP is also amber.

300152

OK On—DC power is being supplied to the router and the Cisco IOS software is

running.

Blinking—Bootup is in process, or the router is in ROMMON monitor mode.

Off—Power is not supplied to the router.

PPP On—At least one PPP session is established.

CD Green—xDSL interface is connected to the DSLAM6.

Blinking Green—Training to the line.

Off—A connection has not been established or the port is shut down.

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2

Connecting Cisco G.SHDSL EFM/ATM to the Network

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2

What to do next

See the “Connecting Cisco G.SHDSL EFM/ATM to the Network” section on page 4 for cable

information.

Connecting Cisco G.SHDSL EFM/ATM to the Network

For connecting Cisco G.SHDSL EFM/ATM EHWICs to a network, see the section about connecting an

interface card to a network in Connecting DSL WAN Interface Cards.

What to Do Next

See the “Configuring Cisco G.SHDSL EFM/ATM” section on page 4 for information about configuring

DSL groups.

Configuring Cisco G.SHDSL EFM/ATM

Configure DSL groups for Cisco G.SHDSL EFM/ATM using the Cisco IOS CLI on the router in

privileged configuration mode.

•Configuring EFM or ATM Mode and a DSL Group, page 5

•Configuring the G.SHDSL Service on a Cisco Router, page 6

•Configuring 2-Wire Non-bonding DSL Group, page 17

•Configuring Bonding Groups in ATM Mode, page 19

•Configuring Auto Groups in ATM Mode, page 22

•Configuring an EFM-Bonding Group, page 23

•Configuring Auto Groups in EFM Mode, page 25

Note The annex configuration option is available only if the termination is central office (CO).

DATA Blink—xDSL interface is either receiving or transmitting data.

Off—No data is being transmitted or being received.

EFM Green—Indicates EFM mode.

ATM Green—Indicates ATM mode.

VPN On—VPN is connected.

FE LAN Green—Ethernet port is connected.

Blinking Green—Data is either being received or being transmitted.

Off—Ethernet port is not connected.

Data BRI On—ISDN D channel is connected.

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2

Configuring Cisco G.SHDSL EFM/ATM

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2

Configuring EFM or ATM Mode and a DSL Group

Use the Cisco IOS CLI on the router in global config-controller mode to configure the mode on the

Cisco EHWIC-4SHDSL-EA or the C888EA.

Note The dsl-group must be removed before changing from a previously configured mode.

SUMMARY STEPS – ATM

1. mode atm

2. One of the following:

•dsl-group auto

•dsl-group DSL_group_number pairs link {m-pair | ima}

SUMMARY STEPS – EFM

1. mode efm

2. One of the following:

•dsl-group auto

•dsl-group DSL_group_number pairs link {efm-bond}

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2

Configuring Cisco G.SHDSL EFM/ATM

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2

DETAILED STEPS – ATM

DETAILED STEPS – EFM

Configuring the G.SHDSL Service on a Cisco Router

To configure the G.SHDSL service on the Cisco EHWIC-4SHDSL-EA or C888EA using the

Cisco IOS CLI in global configuration mode, follow these steps.

Note For EHWICs, use the three-tuple notation (slot number/subslot number/0). For fixed platforms, use the

single-tuple notation (slot number).

SUMMARY STEPS

1. controller shdsl slot number/subslot number/0

2. dsl-group DSL_group_number pairs link-number

3. shdsl rate {number | auto}

4. exit

5. exit

6. One of the following:

•interface ethernet <slot>/<subslot>/<0> (in EFM mode)

•interface atm <slot>/<subslot>/<0> (in ATM mode)

Command Purpose

Step 1 mode atm

Example:

Router(config-controller)# mode atm

Router(config-controller)#

Selects the ATM mode.

Step 2 dsl-group DSL_group_number pairs link ima

Example:

Router(config-controller)# dsl-group 0 pairs 0-1 ima

Router(config-controller-dsl-group)#

Configures IMA group.

Command Purpose

Step 1 mode efm

Example:

Router(config-controller)# mode efm

Router(config-controller)#

Selects the EFM mode.

Step 2 dsl-group DSL_group_number pairs link efm-bond

Example:

Router(config-controller)# dsl-group 0 pairs 0-1

efm-bond

Router(config-controller-dsl-group)#

Configures EFM bond.

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2

Configuring Cisco G.SHDSL EFM/ATM

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2

7. ip address <IP-address> <subnet mask>

8. exit

9. exit

10. One of the following:

•show interface ethernet [slot/port-adapter/port] (in EFM mode)

•show interface atm [slot/port-adapter/port] (in ATM mode)

Note In CPE, Annex and TC-PAM (Trellis Coded Pulse Amplitude Modulation) are not configurable. They

are configured automatically according to the central office (CO) settings.

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2

Configuring Cisco G.SHDSL EFM/ATM

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2

DETAILED STEPS

Command Purpose

Step 1 controller shdsl slot number/subslot number/0

Note For EHWICs, use the three-tuple notation

(slot number/subslot number/0) shown here. For

fixed platforms, use the single-tuple notation

(slot number).

Example:

Router# conf t

Router(config)# controller shdsl 0/3/0

Selects controller and enter DSL group configuration

mode.

Note See the “Configuring Cisco G.SHDSL

EFM/ATM” section on page 4 for details about

creating and configuring DSL groups.

Step 2 dsl-group DSL_group_number pairs link-number

Example:

Router(config-controller)# dsl-group 0 pairs 0

Router(config-controller-dsl-group)#

Selects DSL pair link number.

Step 3 shdsl rate {number | auto}

Example:

Router(config-controller-dsl-group)# shdsl rate

2304

For more information, refer to the “Command Reference”

section on page 49.

Selects rate for controller.

Step 4 exit

Example:

Router(config-controller-dsl-group)# exit

Router(config-controller)#

Exits dsl-group configuration mode.

Step 5 exit

Example:

Router(config-controller)# exit

Router(config)#

Exits controller configuration mode.

Step 6 For EFM mode:

interface Ethernet <slot>/<subslot>/<0>

Example:

Router(config)# interface ethernet 0/3/0

Router#

For ATM mode:

interface atm <slot>/<subslot>/<0>

Example:

Router(config)# interface atm 0/3/0

Router#

For EFM mode:

Enters the interface Ethernet configuration mode.

For ATM mode:

Enters the interface atm configuration mode.

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2

Configuring Cisco G.SHDSL EFM/ATM

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2

Default dsl-group configurations

For the dsl-group command, the following default values apply.

Step 7 For ATM mode:

interface atm <slot>/<subslot>/<0>

Example:

Router(config)# interface atm 0/3/0

Router#

Step 8 ip address <IP-address> <subnet mask>

Example:

Router(config)# ip address 5.5.5.1 255.255.255.0

Router(config-if)#

Assigns an IP address to the DSL Ethernet/ATM/IMA

interface.

Step 9 For ATM mode:

pvc vpi/vci

Example:

Router(config-if)# pvc 1/100

Creating a pvc on the atm/ima interface

Step 10 For ATM mode:

cbr pcr

Example:

Router(config-if)# cbr pcr

Configures atm traffic class of service.

Step 11 exit

Example:

Router(config-if)# exit

Router(config)#

Exits from interface configuration mode.

Step 12 exit

Example:

Router(config)# exit

Router#

Exits from global configuration mode.

Step 13 For EFM mode:

show interface ethernet [slot/port-adapter/port]

Example:

Router# show interface ethernet 0/3/0

For ATM mode:

show interface atm [slot/port-adapter/port]

Example:

Router# show interface atm 0/3/0

For EFM mode:

Verifies the Ethernet interface configuration.

For ATM mode:

Verifies the ATM interface configuration.

Command Purpose

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2

Configuring Cisco G.SHDSL EFM/ATM

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2

Examples

The examples in this section show the output of a 2-wire configuration in EFM mode and in ATM Mode.

The commands include:

•show controllers shdsl

•show controllers ethernet

EFM mode

The following examples show the output of a 2-wire configuration in EFM mode.

show controllers shdsl

Router# sh controllers shdsl 0/3/0

Controller SHDSL 0/3/0 is UP

Hardware is EHWIC-4SHDSL-EA, rev 0 on slot 0, hwic slot 3

Capabilities: EFM: 2-wire, EFM-Bond, Annex A, B, F & G

ATM: 2-wire, Mpair, IMA, Annex A, B, F & G

CPE termination

cdb=0x14F0584, plugin=0x14DF8BC, ds=0x12FFBEF0 base=0xEC600000

FPGA Version is A11

NPU Source: System

NPU Firmware version: SHDSL_EA_FW_20110906071435

Vendor: Infineon, Chipset: SOCRATES-4e

PHY Source: System

IDC Firmware version: V1.7.2.0

DFE Firmware version: V-1.1.7.10__2 10

Group info:

Type: EFM 2-wire status: Up

Ethernet Interface: Ethernet0/3/0, hwidb: 0x131CF7A4

ATM Interface: ATM0/3/0, hwidb: 0x131D428C

Currently active interface: Ethernet

Configured/active num links: 1/1, bit map: 0x1/0x1

Line termination: CPE, Annex: B

PMMS disabled,Line coding: 16-TCPAM

Configured/actual rate: AUTO/2304 kbps

Loopback type: None

Dying Gasp: Present

SHDSL wire-pair (0) is in DSL UP state

LOSW Defect alarm: none

Option Default Value Description

shdsl rate auto Selects the best data rate possible for the given configurations at

Central Office (CO) and Customer Premise Equipment (CPE)

locations.

You can configure the current and worst case SNR margins using the

shdsl rate auto command to enable rate

adaption/PMMS/line probing.

Example:

Router(config-controller-dsl-group)# shdsl rate auto ?

current Current SNR Margin

worst Worst SNR Margin

<cr>

For more information, refer to the “Command Reference” section on

page 49.

Inhaltsverzeichnis

Andere Cisco Netzwerkkarte Handbücher

Cisco

Cisco uBR10-LCP2-MC28C Bedienungsanleitung

Cisco

Cisco Catalyst 4500 Abmessungen

Cisco

Cisco WEC600N Bedienungsanleitung

Cisco

Cisco ONS 15310-MA Bedienungsanleitung

Cisco

Cisco Linksys WUSB54G Bedienungsanleitung

Cisco

Cisco PA-FE-FX Bedienerhandbuch

Cisco

Cisco One-Port Serial WAN Interface Card Cable... Bedienungsanleitung

Cisco

Cisco MGX-FRSM-2CT3 Bedienungsanleitung

Cisco

Cisco Media Gateway Controller Node Manager Bedienungsanleitung

Cisco

Cisco Linksys WMA11B Bedienungsanleitung

Cisco

Cisco 12000 - Series Chassis Modular Expansion... Bedienungs- und Wartungsanleitung

Cisco

Cisco VWIC-2MFT-T1 - Multiflex Trunk Voice/WAN Interface Card Expansion... Bedienungsanleitung

Cisco

Cisco WAN Interface Cards Cable WIC-1B-U Bedienungsanleitung

Cisco

Cisco uBR10-MC5X20H Bedienungsanleitung

Cisco

Cisco Linksys PLS300 Bedienungsanleitung

Cisco

Cisco MC16E Bedienungsanleitung

Cisco

Cisco CTX2500 Bedienungsanleitung

Cisco

Cisco WAN Interface Card Cable WIC-1DSU-T1 Bedienungsanleitung

Cisco

Cisco ONS 15454 Series Bedienungsanleitung

Cisco

Cisco Catalyst 4500 Series Handbuch

Cisco

Cisco EHWIC 1 GE-SFP-CU Bedienungsanleitung

Cisco

Cisco WUSB100 Bedienungsanleitung

Cisco

Cisco 7300-6T3 Bedienerhandbuch

Cisco

Cisco Catalyst 4500 Series Anleitung zur Verwendung

Beliebte Netzwerkkarte Handbücher anderer Marken

FirstComm

FirstComm OBiWiFi5G Bedienungsanleitung

Sun Microsystems

Sun Microsystems Interface Adapter Bedienungsanleitung

TRENDnet

TRENDnet TU2-ETG Bedienungsanleitung

YASKAWA

YASKAWA SI-EN3 Bedienungsanleitung

Paradyne

Paradyne BitStorm 2600 IP DSLAM Bedienungsanleitung

Belkin

Belkin F5D7050 Bedienungsanleitung

3Com

3Com EtherLink 3C509B Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITX Bedienungsanleitung

Delta Electronics

Delta Electronics Braking Modules VFDB Series Bedienungsanleitung

TwinMOS

TwinMOS Booming Bedienungsanleitung

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Bedienungsanleitung

Buffalo

Buffalo AirStation WLI-PCM-L11GP Bedienungsanleitung

National Instruments

National Instruments NI 9234 Bedienungsanleitung

Bose

Bose PowerMatch Dante Bedienungsanleitung

Compaq

Compaq Wireless LAN 100 Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITXR Bedienungsanleitung

Gigafast

Gigafast EE101-AEX Bedienungsanleitung

D-Link

D-Link DHP?P309AV Bedienungsanleitung