Cisco ASR 9000 Series Bedienungsanleitung

Internal Ethernet Control Network Commands on

the Cisco ASR 9000 Series Router

This module provides command line interface (CLI) commands for configuring internal ethernet control on

your router.

•clear controller backplane ethernet location statistics, page 2

•show controllers backplane ethernet local brief, page 3

•show controllers backplane ethernet local clients, page 5

•show controllers backplane ethernet local detail, page 7

•show controllers backplane ethernet local multicast groups, page 9

•show controllers backplane ethernet location brief, page 11

•show controllers backplane ethernet location clients, page 14

•show controllers backplane ethernet location detail, page 16

•show controllers backplane ethernet location multicast groups, page 19

•show controllers switch ports, page 21

•show controllers switch stats, page 23

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference

OL-24762-01 1

clear controller backplane ethernet location statistics

To delete the aggregate statistics of traffic sent and received over the control Ethernet, use the clear controller

backplane ethernet location statistics command in EXEC mode.

clear controller backplane ethernet location node-id statistics

Syntax Description Identifies the node whose controller information you want to delete. The node-id

argument is entered in the rack/slot/module notation.

node-id

Command Modes EXEC

Command History ModificationRelease

This command was introduced.Release 3.7.2

Usage Guidelines

Examples The following example shows how to clear all client statistics on the node at 0/1/1:

RP/0/RSP0/CPU0:router# clear controller backplane ethernet location 0/1/1 clients all

statistics

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference

2OL-24762-01

Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router

clear controller backplane ethernet location statistics

show controllers backplane ethernet local brief

To display brief information about the Ethernet interface that connects the node to the router control Ethernet,

use the show controllers backplane ethernet local brief command in EXEC mode.

show controllers backplane ethernet local brief

Syntax Description This command has no keywords or arguments.

Command Modes EXEC

Command History ModificationRelease

This command was introduced.Release 3.7.2

Usage Guidelines

Examples The following example shows the output from the show controllers backplane ethernet local brief command:

RP/0/RSP0/CPU0:router# show controllers backplane ethernet local brief

FastEthernet0_RP1_0 (local) is up, MTU 1514 bytes

561688 packets input, 53760372 bytes

683424 packets output, 216565877 bytes

RP/0/RSP0/CPU0:router#

Table 1: show controllers backplane ethernet local brief Field Descriptions

DescriptionField

Maximum packet size, in bytes, that a particular

interface can handle.

MTU

Total number of packets received.packets input

Total number of packets transmitted.packets output

Related Commands DescriptionCommand

show controllers backplane ethernet local clients, on page 5

show controllers backplane ethernet local detail, on page 7

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference

OL-24762-01 3

Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router

show controllers backplane ethernet local brief

DescriptionCommand

Displays all multicast addresses currently

being used by active interfaces on the router.

show controllers backplane ethernet local multicast groups, on

page 9

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference

4OL-24762-01

Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router

show controllers backplane ethernet local brief

show controllers backplane ethernet local clients

To display information about local client applications, use the show controllers backplane ethernet local

clients command in EXEC mode.

show controllers backplane ethernet local clients {client-id statistics| all}

Syntax Description Displays a list of client statistics for the specified client ID. Range is from

1 to 22.

client-id statistics

Displays a list of all client applications and their IDs.all

Command Modes EXEC

Command History ModificationRelease

This command was introduced.Release 3.7.2

Usage Guidelines

Examples The following example shows the output from the show controllers backplane ethernet local clients

command, which displays a list of client statistics for client ID 1:

RP/0/RSP0/CPU0:router# show controllers backplane ethernet local clients 1 statistics

Client QNET, ES Client Id 1, PID 20498 running on FastEthernet0_33_1

490915 packets input, 41918238 bytes

490912 packets delivered,41918120 bytes

0 packets discarded (0 bytes) in garbage collection

0 (0 bytes) unicast packets filtered

0 (0 bytes) multicast packets filtered

0 (0 bytes) buffer mgmt policy discards

555660 packets output, 134265364 bytes, 0 could not be transmitted

Table 2: show controllers backplane ethernet local clients Field Descriptions

DescriptionField

Client application name and ID, followed by

backplane client application statistics.

Client

Process ID.PID

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference

OL-24762-01 5

Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router

show controllers backplane ethernet local clients

Related Commands DescriptionCommand

Displays brief information about the Ethernet interface

that connects the node to the router control Ethernet.

show controllers backplane ethernet local brief, on

page 3

show controllers backplane ethernet local detail, on

page 7

Displays all multicast addresses currently being used

by active interfaces on the router.

show controllers backplane ethernet local multicast

groups, on page 9

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference

6OL-24762-01

Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router

show controllers backplane ethernet local clients

show controllers backplane ethernet local detail

To display detailed information for the Ethernet interface that connects the node to the router control Ethernet,

use the show controllers backplane ethernet local detail command in EXEC mode.

show controllers backplane ethernet local detail

Syntax Description This command has no keywords or arguments.

Command Modes EXEC

Command History ModificationRelease

This command was introduced.Release 3.7.2

Usage Guidelines

Examples The following example shows the output from the show controllers backplane ethernet local detail command:

RP/0/RSP0/CPU0:router# show controllers backplane ethernet local detail

FastEthernet0_33_1 is up

Hardware is 10/100 Ethernet, H/W address is 5246.4800.0211

Internet address is 10.0.2.17

MTU 1514 bytes

Encapsulation HFRIES (HFR Internal Ethernet Server)

Mode : Full Duplex, Rate : 100Mb/s

787486 packets input, 64535218 bytes, 0 total input drops

0 packets discarded (0 bytes) in garbage collection

3 packets discarded (582 bytes) in recv processing

Received 8 broadcast packets, 285994 multicast packets

Input errors: 0 CRC, 0 overrun, 0 alignment, 0 length, 0 collision

682244 packets output, 157245225 bytes, 0 total output drops

Output 42649 broadcast packets, 42649 multicast packets

Output errors: 0 underruns, 0 aborts, 0 loss of carrier

Table 3: show controllers backplane ethernet local detail Field Descriptions

DescriptionField

Provides the hardware type, followed by the hardware

address.

Hardware

IP address of the interface.Internet address

Maximum packet size, in bytes, that a particular

interface can handle.

MTU

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference

OL-24762-01 7

Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router

show controllers backplane ethernet local detail

DescriptionField

Encapsulation method assigned to the interface.Encapsulation

Indicates the operating mode of the interface, followed

by transmission data.

Mode

Related Commands DescriptionCommand

Displays brief information about the Ethernet interface

that connects the node to the router control Ethernet.

show controllers backplane ethernet local brief, on

page 3

show controllers backplane ethernet local clients, on

page 5

Displays all multicast addresses currently being used

by active interfaces on the router.

show controllers backplane ethernet local multicast

groups, on page 9

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference

8OL-24762-01

Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router

show controllers backplane ethernet local detail

show controllers backplane ethernet local multicast groups

To display all multicast addresses currently being used by active interfaces on the router, use the show

controllers backplane ethernet local multicast groups command in EXEC mode.

show controllers backplane ethernet local multicast groups

Syntax Description This command has no keywords or arguments.

Command Modes EXEC

Command History ModificationRelease

This command was introduced.Release 3.7.2

Usage Guidelines

Examples The following example shows the output from the show controllers backplane ethernet local multicast

groups command:

RP/0/RSP0/CPU0:router# show controllers backplane ethernet local multicast groups

Intf Multicast Client registered for this address

Name address Id Name

------------------------------------------------------------------------------

FastEthernet0_RP1_CPU0 0100.0000.0064 2 GSP

0100.0000.0065 2 GSP

0100.0000.0066 2 GSP

0100.0000.0068 2 GSP

0100.0000.006a 2 GSP

0100.0000.006c 2 GSP

0100.0000.006e 2 GSP

0100.0000.0070 2 GSP

0100.0000.0072 2 GSP

0100.0000.2774 2 GSP

0100.0000.2775 2 GSP

0100.0000.2776 2 GSP

0100.0000.2778 2 GSP

0100.0000.277a 2 GSP

0100.0000.277c 2 GSP

0100.0000.277e 2 GSP

0100.0000.2780 2 GSP

0100.0000.2782 2 GSP

0100.0000.2784 2 GSP

0100.0000.2786 2 GSP

--More--

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference

OL-24762-01 9

Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router

show controllers backplane ethernet local multicast groups

Table 4: show controllers backplane ethernet local multicast groups Field Descriptions

DescriptionField

Identifies the interface whose multicast addresses are

displayed.

A multicast address is a single address that

refers to multiple network devices.

Note

Intf Name

Multicast addresses associated with the specified

interface.

A multicast address is a single address that

refers to multiple network devices.

Note

Multicast address

Client identifier.ID

Client application name.Name

Related Commands DescriptionCommand

Displays brief information about the Ethernet

interface that connects the node to the router

control Ethernet.

show controllers backplane ethernet local brief, on page 3

show controllers backplane ethernet local clients, on page

show controllers backplane ethernet local detail, on page

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference

10 OL-24762-01

Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router

show controllers backplane ethernet local multicast groups

Andere Handbücher für ASR 9000 Series

Inhaltsverzeichnis

Andere Cisco Netzwerk-Router Handbücher

Cisco

Cisco Linksys E2500 Bedienungsanleitung

Cisco

Cisco 8100 Series Handbuch

Cisco

Cisco vEdge 5000 Bedienungsanleitung

Cisco

Cisco Firepower 1120 Bedienungsanleitung

Cisco

Cisco Linksys X2000 V2 Bedienungsanleitung

Cisco

Cisco ASR 903 Bedienungsanleitung

Cisco

Cisco EF4116 Bedienungsanleitung

Cisco

Cisco NCS 4216 Bedienungsanleitung

Cisco

Cisco N5010P-N2K-BE Bedienungsanleitung

Cisco

Cisco 7206 - VXR Router Bedienungsanleitung

Cisco

Cisco ASR 9000 Series Bedienungsanleitung

Cisco

Cisco 1760V Bedienungsanleitung

Cisco

Cisco Nexus 1000V Bedienungsanleitung

Cisco

Cisco IR1101 Bedienungsanleitung

Cisco

Cisco 1003 Bedienungsanleitung

Cisco

Cisco Broadband Access Center Bedienungsanleitung

Cisco

Cisco 10000 Series Bedienungsanleitung

Cisco

Cisco 1941-DC-A - MWR Mobile Wireless Edge Router Handbuch

Cisco

Cisco Nexus 5600 Series Service-Handbuch

Cisco

Cisco Profile Series Bedienungsanleitung

Cisco

Cisco Network Convergence System 540 Handbuch

Cisco

Cisco ASR 9000 Series Montageanleitung

Cisco

Cisco 880 Series Bedienungsanleitung

Cisco

Cisco 3200 Series Installations- und Betriebshandbuch

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

LevelOne

LevelOne FBR-1416 Bedienungsanleitung

Dynacord

Dynacord Promatrix 6000 Bedienungsanleitung

Lorex

Lorex F5D8230-4 Bedienungsanleitung