Cisco SCE8000 GBE Bedienerhandbuch

Americas Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

http://www.cisco.com

Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 527-0883

Cisco SCE8000 GBE Installation and

Configuration Guide

Release 3.5.5

December 04, 2012

Text Part Number: OL-19897-02

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL

STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT

WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT

SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE

OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH

ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT

LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF

DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING,

WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO

OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this

URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership

relationship between Cisco and any other company. (1110R)

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the

document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

Cisco SCE8000 GBE Installation and Configuration Guide

iii

Cisco SCE8000 GBE Installation and Configuration Guide

OL-19897-02

CONTENTS

About this Guide xi

Introduction xi

Document Revision History xii

Organization xiii

Related Publications xiv

Conventions xiv

Obtaining Documentation and Submitting a Service Request xv

CHAPTER

1Cisco Service Control Overview 1-1

Introduction 1-1

Cisco Service Control Solution 1-1

Service Control for Broadband Service Providers 1-2

Cisco Service Control Capabilities 1-2

SCE Platform Description 1-3

Management and Collection 1-4

Network Management 1-5

Subscriber Management 1-5

Service Configuration Management 1-6

Data Collection 1-6

CHAPTER

2Introduction to the Cisco SCE8000 GBE Platform 2-1

Introduction 2-1

Information About the SCE8000 GBE Platform 2-1

Service Control Module (SCE8000-SCM-E) 2-2

Introduction to SIPs and SPAs 2-4

SPA Interface Processors 2-4

Specifying the SIP Subslot Location for a SPA 2-5

Shared Port Adapters 2-5

Modular Optics 2-6

8-Port Gigabit Ethernet SPA Cables and Connectors 2-6

SFP Module Connections 2-6

The SCE8000-SIP 2-8

The 8-Port GBE SPA Interface Module 2-8

Contents

Cisco SCE8000 GBE Installation and Configuration Guide

OL-19897-02

The Cisco SCE8000 GBE Optical Bypass 2-10

Optical Bypass Functionality 2-10

Optical Bypass Module Connectivity 2-10

Optical Bypass Module (OPB-SCE8K-2L) 2-11

Optical Bypass Module Specifications 2-12

Fan Assembly 2-13

Power Supplies 2-13

Power Supply Cooling 2-14

Load Sharing 2-14

Checking the Shipping Container Contents 2-15

Cisco SCE8000 GBE Component List 2-16

Cisco SCE8000 GBE Installation Checklist 2-17

CHAPTER

3Cisco SCE8000 GBE Topology and Topology-Related Parameters 3-1

Introduction 3-1

The Cisco SCE8000 GBE Platform 3-1

Topology Considerations 3-2

Physical Topologies 3-3

SCE8000 GBE Interface Numbering 3-3

Single Cisco SCE8000 GBE Topologies 3-4

Inline vs. Receive-only Installation 3-4

Dual Cisco SCE8000 GBE Topology (Cascade) 3-5

Link Continuity 3-7

Internal Bypass Mechanism 3-7

External Optical Bypass 3-8

Topology-Related Parameters 3-10

Connection Mode Parameter 3-11

sce-id Parameter 3-11

Priority 3-11

On-Failure Mode Parameter 3-12

Asymmetric Routing Topology 3-13

Asymmetric Routing and Other Service Control Capabilities 3-13

CHAPTER

4Installing the Cisco SCE8000 GBE Chassis 4-1

Introduction 4-1

Preparing for Installation 4-2

Safety 4-2

Site Requirements 4-2

Contents

Cisco SCE8000 GBE Installation and Configuration Guide

OL-19897-02

Preventing Electrostatic Discharge Damage 4-3

Environmental Requirements 4-3

Power Requirements 4-4

Power Connection Guidelines 4-4

AC-Powered Systems 4-5

DC-Powered Systems 4-11

Site Planning Checklist 4-13

Installing the Cisco SCE8000 GBE Chassis in the Rack 4-14

Unpacking the Cisco SCE8000 GBE Chassis 4-15

Installation Guidelines 4-15

Required Tools 4-16

Installing the Chassis Brackets 4-16

Installing the Chassis in the Rack 4-17

Installing an Optical Bypass Module 4-19

Connecting the System Ground 4-20

Required Tools and Equipment 4-20

Installing the Power Supplies in the Cisco SCE8000 GBE Chassis 4-21

CHAPTER

5Connecting the Management Interfaces 5-1

Introduction 5-1

How to Set Up the Local Console 5-1

Initial Setup Parameters 5-2

Connecting the Management Interface 5-4

How to Cable the Management Port 5-4

How to Verify Management Interface Connectivity 5-5

CHAPTER

6Cabling the GBE Line Ports and Completing the Installation 6-1

Introduction 6-1

Connecting the GBE Line Ports to the Network 6-2

Single Cisco SCE8000 GBE Topologies 6-2

Dual Cisco SCE8000 GBEs Topology 6-3

The Optical Bypass Module 6-4

Optical Bypass Module Connectivity 6-5

Cabling the GBE Line Interface Ports 6-6

SFP Module Cabling and Connection Equipment 6-7

Optical Device Maintenance 6-8

How to Cable the GBE Line Interface Ports 6-9

Cabling the Line Interface Ports: Using the External Optical Bypass Module 6-9

Contents

Cisco SCE8000 GBE Installation and Configuration Guide

OL-19897-02

Testing Connectivity: Examining Link LEDs and Counters 6-11

Examining the LEDs 6-11

How to View the Gigabit Ethernet Port Status 6-11

Viewing the GBE Line Interface Counters 6-12

How to View the Gigabit Ethernet Line Interface Counters 6-12

How to View the User Log Counters 6-13

How to Install a Service Control Application 6-13

Cascaded Systems 6-13

How to Install a Cascaded System 6-13

CLI Commands for Cascaded Systems 6-15

Topology-Related Parameters for Redundant Topologies 6-15

How to Configure the Connection Mode 6-15

How to Set the Link Mode 6-16

Monitoring a Cascaded System 6-17

CHAPTER

7Basic Cisco SCE8000 GBE Platform Operations 7-1

Introduction 7-1

Starting the Cisco SCE8000 GBE Platform 7-1

Checking Conditions Prior to System Startup 7-2

Performing Complex Configurations 7-2

Starting the System and Observing Initial Conditions 7-2

What to Do Next 7-3

Final Tests 7-3

Verifying Operational Status 7-3

Viewing the User Log Counters 7-4

Viewing the Gigabit Ethernet Port Status 7-4

Viewing the Gigabit Ethernet Counters 7-4

Managing Cisco SCE8000 GBE Configurations 7-5

Viewing Configurations 7-5

Saving or Changing the Configuration Settings 7-7

Example for Saving or Changing the Configuration Settings 7-8

Restoring a Previous Configuration 7-9

Example for Restoring a Previous Configuration 7-10

How to Display the SCE Platform Version Information 7-11

Example for Displaying the SCE Platform Version Information 7-12

How to Display the SCE Platform Inventory 7-14

Examples for Displaying the SCE Platform Inventory 7-14

Displaying the SCE Platform Inventory: FRUs Only 7-15

Displaying the Complete SCE Platform Inventory 7-16

Contents

vii

Cisco SCE8000 GBE Installation and Configuration Guide

OL-19897-02

How to Display the System Uptime 7-21

Example for Displaying the System Uptime 7-21

Rebooting and Shutting Down the SCE Platform 7-21

Rebooting the SCE Platform 7-22

Examples for Rebooting the SCE Platform 7-22

How to Shut Down the SCE Platform 7-22

Examples for Shutting Down the SCE Platform 7-23

CHAPTER

8Troubleshooting 8-1

Introduction 8-1

Troubleshooting Overview 8-1

Information About Troubleshooting Tools 8-2

CLI Commands for Troubleshooting 8-2

Checking the LEDs 8-4

Problem Solving Using a Subsystems Approach 8-6

Identifying Startup Problems 8-7

Troubleshooting the Power Subsystem 8-7

Troubleshooting the Firmware Package Installation 8-8

Troubleshooting the Management Subsystem 8-9

Troubleshooting the Link Interface Subsystem 8-11

Troubleshooting with the User Log 8-12

The Logging System 8-12

How to Copy the User Log to an External Source 8-12

How to Copy the User Log to an Internal Location 8-12

How to View the User Log 8-13

How to Clear the User Log 8-13

How to View the User Log Counters 8-13

How to View the Non-volatile Counter For the User-file-log Only 8-13

Generating a File for Technical Support 8-14

CHAPTER

9Removal and Replacement Procedures 9-1

Introduction 9-1

Safety 9-2

Preventing Electrostatic Discharge Damage 9-2

Supported Hardware 9-3

Removing and Replacing the Power Supply 9-4

Required Tools 9-4

Removing an AC-Input Power Supply 9-4

Contents

viii

Cisco SCE8000 GBE Installation and Configuration Guide

OL-19897-02

Installing an AC-Input Power Supply 9-6

Removing a DC-Input Power Supply 9-7

Installing a DC-Input Power Supply 9-8

Removing and Replacing the Fan Assembly 9-12

Required Tools 9-12

Removing the Fan Assembly 9-12

Installing the Fan Assembly 9-13

Removing and Replacing Modules 9-13

Required Tools 9-14

Handling SIPs 9-14

Installing a Module 9-15

Removing a Module 9-18

Inserting and Removing a Module: Detail 9-20

Verifying the Installation 9-21

Removing and Replacing Shared Port Adapters 9-23

Required Tools and Equipment 9-24

Laser/LED Safety 9-24

Handling SPAs 9-25

SPA Installation and Removal 9-26

Installing a SPA in a SIP 9-27

Removing a SPA from a SIP 9-27

Removing and Replacing the Optical Bypass Module 9-27

Removing the Optical Bypass Module 9-27

Installing the Optical Bypass Module 9-28

Replacing the Optical Bypass Module without Disrupting Traffic on the Link 9-28

APPENDIX

ACLI Commands to Verify a Successful Installation A-1

Introduction 1

Basic Post-Installation Checklist A-1

CLI Command Output Samples A-3

show version A-3

show inventory A-5

show interface A-7

show system operational status A-7

show interface linecard A-7

show interface linecard connection-mode A-8

show interface linecard link mode A-8

show interface linecard external-bypass A-8

show RDR-formatter A-8

Contents

Cisco SCE8000 GBE Installation and Configuration Guide

OL-19897-02

show interface linecard subscriber sm-connection-failure A-9

show ip rpc-adapter sessions A-9

Contents

Cisco SCE8000 GBE Installation and Configuration Guide

OL-19897-02

Andere Handbücher für SCE8000 GBE

Inhaltsverzeichnis

Andere Cisco Server Handbücher

Cisco

Cisco UCS C220 M3 Bedienungsanleitung

Cisco

Cisco UCS B440-M1 Kurzanleitung

Cisco

Cisco UCS C200 Handbuch

Cisco

Cisco UCS C220 Bedienungsanleitung

Cisco

Cisco UCS B200 Bedienungsanleitung

Cisco

Cisco Secure Network Server 3600 Series Handbuch

Cisco

Cisco MSE 3365 Bedienungsanleitung

Cisco

Cisco Meraki MX65 Bedienungsanleitung

Cisco

Cisco 2501 - Router - EN Bedienungsanleitung

Cisco

Cisco UCS C210 Montage- und Wartungsanleitung

Cisco

Cisco Sourcefire Defense Center 750 Bedienungsanleitung

Cisco

Cisco UCS Invicta C3124SA Bedienungsanleitung

Cisco

Cisco UCS S3260 M5 Leitfaden

Cisco

Cisco UCS C210 M2 Systemhandbuch

Cisco

Cisco UCS C24 Montage- und Wartungsanleitung

Cisco

Cisco UCS C220 M4 Kurzanleitung

Cisco

Cisco B200 M3 Bedienungsanleitung

Cisco

Cisco 1600 Bedienungsanleitung

Cisco

Cisco TelePresence Bedienungsanleitung

Cisco

Cisco PDS2000 Bedienungsanleitung

Cisco

Cisco SNS-3515 series Handbuch

Cisco

Cisco UCS C24 Montage- und Wartungsanleitung

Cisco

Cisco NAC-3300 Series Bedienungsanleitung

Cisco

Cisco C880 M4 Montageanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung