Cisco UCS E Series Handbuch

Cisco UCS E-Series Servers and the Cisco UCS

E-Series Network Compute Engine Hardware

Installation Guide

Introduction

This document provides installation information for the Cisco UCS E-Series Servers (E-Series Servers) and

the Cisco UCS E-Series Network Compute Engine (NCE). It includes the following sections:

New and Changed Information

Table 1: New and Changed Information for Software Release 3.2.1

Updated SectionsChanged in Software

Release

DescriptionFeature

“Hardware Requirements”

“Hardware Information for the M3

E-Series Servers”

3.2.1Support added to install the

UCS-E1120D-M3/K9 and

UCS-E180D-M3/K9 into the Cisco ISR

4000 series.

Double-Wide E-Series

Server refresh

Table 2: New and Changed Information for Software Release 3.1.1

Updated SectionsChanged in Software

Release

DescriptionFeature

“Hardware Requirements”

“Hardware Information for the M3 E-Series

Servers”

“Single-Wide E-Series Servers and the SM

E-Series NCE—Front Panel and Components”

3.1.1Support added to install the

UCS-E160S-M3/K9 into the

Cisco ISR 4000 series.

Single-Wide E-Series

Server refresh

Table 3: New and Changed Information for Software Release 3.0.1

Updated SectionsChanged in Software

Release

DescriptionFeature

“Hardware Information for the NIM

E-Series NCE”

“NIM E-Series NCE”

3.0.1Support added to install the NIM E-Series

Network Compute Engine (NIM E-Series

NCE) into the Cisco ISR 4000 series.

NIM E-Series Network

Compute Engine

Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine Hardware Installation Guide

Table 4: New and Changed Information for Software Release 2.4.1

Updated SectionsChanged in

Software Release

DescriptionFeature

“Hardware Information for the

EHWIC E-Series NCE”

“EHWIC E-Series NCE”

2.4.1Support added to install the EHWIC E-Series

Network Compute Engine (EHWIC E-Series

NCE) into the Generation 2 Cisco Integrated

Services Routers (Cisco ISR G2).

EHWIC E-Series Network

Compute Engine

“Overview”2.4.1Support added to install E-Series Servers in all

Cisco ISR 4000 series.

Cisco ISR 4000 Series

Table 5: New and Changed Information for Software Release 2.3.1

Updated SectionChanged in Software

Release

DescriptionFeature

“Hardware Information for the

M2 E-Series Servers”

2.3.1Intel Ivy Bridge 2418L v2 and 2428L v2

support added on the UCS-E160D-M2 and

UCS-E180D-M2 double-wide E-Series

Servers.

Double-Wide E-Series

Server refresh

Table 6: New and Changed Information for Software Release 2.2.1

Updated SectionsChanged in

Software Release

DescriptionFeature

“Hardware Information for the

M2 E-Series Servers”

2.2.1Support added to install the SM E-Series Network

Compute Engine (SM E-Series NCE) into the

Generation 2 Cisco Integrated Services Routers

(Cisco ISR G2) and the Cisco ISR 4451-X Integrated

Services Router (Cisco ISR 4451-X).

SM E-Series Network

Compute Engine

“Hardware Information for the

M2 E-Series Servers”

2.2.1Intel Ivy Bridge E3-1105C V2 support added on the

UCS-E140S-M2 single-side E-Series Server.

Single-wide E-Series

Server refresh

Table 7: New and Changed Information for Software Release 1.0(2)

Updated SectionsChanged in

Software

Release

DescriptionFeature

“Overview”

“Hardware Requirements”

1.0(2)Support for installing the E-Series Server

into the Cisco ISR 4451-X.

New Platform Support

“Verifying E-Series Server or SM

E-Series NCE Installation”

1.0(2)Command to verify that the router

recognizes the E-Series Server.

Verifying E-Series Server

Installation

Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine Hardware Installation Guide

New and Changed Information

Updated SectionsChanged in

Software

Release

DescriptionFeature

“Migrating the E-Series Server from

a Cisco ISR G2 into a Cisco ISR

4000 Series”

1.0(2)Special instructions for migrating the

E-Series Server from a Cisco ISR G2 into

a Cisco ISR 4000 series.

Migrating the E-Series Server

from an Cisco ISR G2 into a

Cisco ISR 4000 series

“Removing the E-Series Server from

a Cisco ISR 4000 Series”

1.0(2)New OIR command for E-Series Server

installed in a Cisco ISR 4000 series.

New Online Insertion and

Removal (OIR) command

Overview

The Cisco UCS E-Series Servers (E-Series Servers) and the Cisco UCS E-Series Network Compute Engine

(NCE) are a family of size-, weight-, and power-efficient blade servers that are housed within the Generation

2 Cisco Integrated Services Routers (Cisco ISR G2) and the Cisco ISR 4000 series. These servers provide a

general-purpose compute platform for branch-office applications deployed either as bare-metal on operating

systems, such as Microsoft Windows or Linux, or as virtual machines on hypervisors, such as VMware vSphere

Hypervisor, Microsoft Hyper-V, or Citrix XenServer.

The E-Series Servers are purpose-built with powerful Intel Xeon processors for general-purpose compute.

They come in the following form factors: single-wide and double-wide. The single-wide E-Series Server fits

into one server module (SM) slot, and the double-wide E-Series Server fits into two SM slots.

The NCEs are price-to-power optimized modules that are built to host Cisco network applications and other

lightweight general-purpose applications. They come in three form factors: SM, EHWIC, and NIM. The SM

E-Series NCE fits into one SM slot, the NIM E-Series NCE fits into one NIM slot, and the EHWIC E-Series

NCE fits into two EHWIC slots.

EHWIC E-Series NCE can be installed in the Cisco ISR G2 only.

Note

• NIM E-Series NCE can be installed in the Cisco ISR 4000 series only.

Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine Hardware Installation Guide

Overview

• M3 E-Series servers can be installed in the Cisco ISR 4000 series only.

• The Cisco ISR 4331 has one SM slot. The Cisco ISR 4321 and the Cisco ISR 4431 have no SM slots.

• Citrix XenServer is supported on the E-Series Servers only.

Hardware Requirements

E-Series Servers and the SM E-Series NCE can be installed in the Cisco ISR G2 and the Cisco ISR 4000

series.

Note

• The EHWIC E-Series NCE can be installed in the Cisco ISR G2 only.

• The NIM E-Series NCE can be installed in the Cisco ISR 4000 series only.

• The M3 E-Series servers can be installed in the Cisco ISR 4000 series only.

The following M1 E-Series Servers are supported:

• UCS-E140S-M1—Single-wide E-Series Server, 4-cores CPU, 1.0-GHz clock speed

• UCS-E140D-M1—Double-wide E-Series Server, 4-cores CPU, 2.0-GHz clock speed

• UCS-E160D-M1—Double-wide E-Series Server, 6-cores CPU, 1.8-GHz clock speed

• UCS-E140DP-M1—Double-wide E-Series Server, 4-cores CPU, with PCIe, 2.0-GHz clock speed

• UCS-E160DP-M1—Double-wide E-Series Server, 6-cores CPU, with PCIe, 1.8-GHz clock speed

The following M2 E-Series Servers and SM E-Series NCE are supported:

• UCS-EN120S-M2—SM E-Series NCE, 2-cores CPU, 2.0-GHz clock speed

• UCS-E140S-M2—Single-wide E-Series Server, 4-cores CPU, 1.8-GHz clock speed

• UCS-E160D-M2—Double-wide E-Series Server, 6-cores CPU, 2.0-GHz clock speed

• UCS-E180D-M2—Double-wide E-Series Server, 8-cores CPU, 1.8-GHz clock speed

The following M3 E-Series Servers are supported:

• UCS-E160S-M3—Single-wide E-Series Server, 6-cores CPU, 2.0-GHz clock speed

• UCS-E180D-M3—Double-wide E-Series Server, 8-cores CPU, 1.5-GHz clock speed

• UCS-E1120D-M3—Double-wide E-Series Server, 12-cores CPU, 1.6-GHz clock speed

The M1, M2, and M3 E-Series Servers naming terminology indicates different generations of Intel processors

within the respective servers.

Note

The following EHWIC E-Series NCE is supported:

• UCS-EN120E—EHWIC E-Series NCE, 2-cores CPU, 1.7-GHz clock speed

The following NIM E-Series NCE is supported:

• UCS-EN140N-M2—NIM E-Series NCE, 4-cores CPU, 1.7-GHz clock speed

Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine Hardware Installation Guide

Hardware Requirements

Hardware Information for the M1 E-Series Servers

Table 8: M1 E-Series Servers Hardware at a Glance

UCS-E140DP-M1 and

UCS-E160DP-M1Double-Wide

E-Series Servers with PCIe

UCS-E140D-M1 and

UCS-E160D-M1

Double-Wide E-Series Servers

UCS-E140S-M1 Single-Wide

E-Series Server

Feature

Double-wide SMDouble-wide SMSingle-wide SMForm Factor

Intel Xeon

E5-2418L and E5-2428L

Intel Xeon

E5-2418L and E5-2428L

Intel Xeon

E3-1105C

CPU

4-Cores with 2.0-GHz Clock

Speed

6-Cores with 1.8-GHz Clock

Speed

4-Cores with 2.0-GHz Clock

Speed

6-Cores with 1.8-GHz Clock

Speed

4-Cores with 1.0-GHz Clock

Speed

CPU Cores and

CPU Clock Speed

3 Slots3 Slots2 SlotsMemory DIMM Slots

8 to 48 GB

Supports DDR3 1333-MHz

RDIMM 1.35 V, 4-GB, 8-GB,

and 16-GB

8 to 48 GB

Supports DDR3 1333-MHz

RDIMM 1.35 V, 4 GB, 8 GB,

and 16 GB

8 to 16 GB

Supports DDR3 1333-MHz

VLP UDIMM 1.5 V, 4 GB, and

8 GB

RAM

RAID 0 and RAID 1RAID 0, RAID 1, and RAID 5RAID 0 and RAID 1RAID

SATA, SAS, SSD, SED, and

External USB

SATA, SAS, SSD, SED, and

External USB

SATA, SAS, SSD, SED, and

External USB

Storage Type

SAS 10K RPM, SATA 7200

RPM, and SAS SSD Drives 1

Supports 2 Drives

SAS 10K RPM, SATA 7200

RPM, and SAS SSD Drives 1

Supports 3 Drives

SAS 10K RPM, SATA 7200

RPM, and SAS SSD Drives1

Supports 2 Drives

HDD

200 GB to 2 TB200 GB to 3 TB200 GB to 2 TBStorage Capacity2

2 Gigabit Ethernet Interfaces2 Gigabit Ethernet Interfaces2 Gigabit Ethernet InterfacesInternal Network Interface

2 USB Connectors

2 RJ-45 Gigabit Ethernet

Connectors

1 Management Port

1 VGA Port

1 Serial DB9

2 USB Connectors

2 RJ-45 Gigabit Ethernet

Connectors

1 Management Port

1 VGA Port

1 Serial DB9

1 USB Connector

1 RJ-45 Gigabit Ethernet

Connector

1 Management Port

1 KVM Port (Supports VGA,1

USB, 1 Serial DB9)

External Interfaces

2921, 2951, 3925, 3925e, 3945,

3945e, 4351, 4451-X

2921, 2951, 3925, 3925e, 3945,

3945e, 4351, 4451-X

2911, 2921, 2951, 3925, 3925e,

3945, 3945e, 4331, 4351,

4451-X

Router Platforms

Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine Hardware Installation Guide

Hardware Information for the M1 E-Series Servers

UCS-E140DP-M1 and

UCS-E160DP-M1Double-Wide

E-Series Servers with PCIe

UCS-E140D-M1 and

UCS-E160D-M1

Double-Wide E-Series Servers

UCS-E140S-M1 Single-Wide

E-Series Server

Feature

2911 ISR G2—None

2921 ISR G2—1 E-Series

Server

2951 ISR G2—1 E-Series

Server

The Cisco 2921 and

2951 ISR G2 support

4 cores only. The

E160 servers are 6

core.They are not

supported on Cisco

2921 and 2951 ISR

G2.

Note

3925 ISR G2—1 E-Series

Servers

3925e ISR G2—1 E-Series

Server

3945 ISR G2—1 E-Series

Server

3945e ISR G2—1 E-Series

Server

ISR 4321—None

ISR 4331—None

ISR 4351—1 E-Series Server

ISR 4431—None

ISR 4451-X—1 E-Series Server

2911 ISR G2—None

2921 ISR G2—1 E-Series

Server

2951 ISR G2—1 E-Series

Server

The Cisco 2921 and

2951 ISR G2 support

4 cores only. The

E160 servers are 6

core.They are not

supported on Cisco

2921 and 2951 ISR

G2.

Note

3925 ISR G2—1 E-Series

Server

3925e ISR G2—1 E-Series

Server

3945 ISR G2—1 E-Series

Server

3945e ISR G2—1 E-Series

Server

ISR 4321—None

ISR 4331—None

ISR 4351—1 E-Series Server

ISR 4431—None

ISR 4451-X—1 E-Series Server

2911 ISR G2—1 E-Series

Server

2921 ISR G2—1 E-Series

Server

2951 ISR G2—2 E-Series

Servers

3925 ISR G2—3 E-Series

Servers

3925e ISR G2—3 E-Series

Servers

3945 ISR G2—4 E-Series

Servers

3945e ISR G2—4 E-Series

Servers

ISR 4321—None

ISR 4331—1 E-Series Server

ISR 4351—2 E-Series Servers

ISR 4431—None

ISR 4451-X—2 E-Series

Servers

Maximum Number of E-Series

Servers per Router

1All hardware drives within the E-Series Server must be installed with the same type of storage device: either all SAS drives or

all SATA drives.

2The size of the HDD and SSD drives is expressed in decimal form. For instance, GB=1 billion bytes, not 2^30 bytes. TB=1

trillion bytes, not 2^40 bytes.

Hardware Information for the M2 E-Series Servers

Table 9: M2 E-Series Servers and NCE Hardware at a Glance

UCS-E160D-M2 and

UCS-E180D-M2Double-Wide E-Series

Servers

UCS-E140S M2 Single-Wide E-Series

Server

UCS-EN120S-M2 SM E-Series

NCE

Feature

Double-wide SMSingle-wide SMSingle-wide SMForm Factor

Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine Hardware Installation Guide

Hardware Information for the M2 E-Series Servers

UCS-E160D-M2 and

UCS-E180D-M2Double-Wide E-Series

Servers

UCS-E140S M2 Single-Wide E-Series

Server

UCS-EN120S-M2 SM E-Series

NCE

Feature

Intel Xeon

2418L v2 for 6-Cores

2428L v2 for 8-Cores

Intel Xeon

E3-1105C V2

Pentium B925CCPU

6-Cores with 2.0-GHz Clock Speed

8-Cores with 1.8-GHz Clock Speed

4-Cores with 1.8-GHz Clock Speed2-Cores with 2.0-GHz Clock

Speed

CPU Cores and

CPU Clock Speed

8 to 48 GB

Supports DDR3 1333-MHz RDIMM

1.35 V, 4 GB, 8 GB, and 16 GB

8 to16 GB

Supports DDR3 1333-MHz VLP

UDIMM 1.5 V, 4 GB, and 8 GB

4 to16 GB

Supports DDR3 1333-MHz VLP

UDIMM 1.5 V, 4 GB, and 8 GB

RAM

RAID 0, RAID 1, and RAID 5RAID 0 and RAID 1RAID 0 and RAID 1RAID

SATA, SAS, SSD, SED, and External

USB

SATA, SAS, SSD, SED, and

External USB

SATA, SAS, and External USBStorage Type

SAS 10K RPM, SATA 7200 RPM, and

SAS SSD Drives 1

Supports 3 Drives

SAS 10K RPM, SATA 7200 RPM,

and SAS SSD Drives3

Supports 2 Drives

SAS 10K RPM, SATA 7200

RPM

Supports 2 Drives

HDD

200 GB to 3 TB200 GB to 2 TB500 GB to 2 TBStorage Capacity4

2 Gigabit Ethernet Interfaces2 Gigabit Ethernet Interfaces2 Gigabit Ethernet InterfacesInternal Network

Interface

2 USB Connectors

2 RJ-45 Gigabit Ethernet Connectors

1 Management Port

1 VGA Port

1 Serial DB9

1 USB Connector

1 RJ-45 Gigabit Ethernet Connector

1 Management Port

1 KVM Port (Supports VGA,1 USB,

1 Serial DB9)

1 USB Connector

1 RJ-45 Gigabit Ethernet

Connector

1 Management Port

1 KVM Port (Supports VGA,1

USB, 1 Serial DB9)

External

Interfaces

2921, 2951, 3925, 3925e, 3945, 3945e,

4351, 4451-X

2911, 2921, 2951, 3925, 3925e, 3945,

3945e, 4331, 4351, 4451-X

2911, 2921, 2951, 3925, 3925e,

3945, 3945e, 4331, 4351, 4451-X

Router Platforms

Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine Hardware Installation Guide

Hardware Information for the M2 E-Series Servers

UCS-E160D-M2 and

UCS-E180D-M2Double-Wide E-Series

Servers

UCS-E140S M2 Single-Wide E-Series

Server

UCS-EN120S-M2 SM E-Series

NCE

Feature

2911 ISR G2—None

2921 ISR G2—1 E-Series Server

2951 ISR G2—1 E-Series Server

The Cisco 2921 and 2951

ISR G2 support 6 cores

only.

Note

3925 ISR G2—1 E-Series Servers

3925e ISR G2—1 E-Series Server

3945 ISR G2—1 E-Series Server

3945e ISR G2—1 E-Series Server

ISR 4321—None

ISR 4331—None

ISR 4351—1 E-Series Server

ISR 4431—None

ISR 4451-X—1 E-Series Server

2911 ISR G2—1 E-Series Server

2921 ISR G2—1 E-Series Server

2951 ISR G2—2 E-Series Servers

3925 ISR G2—2 E-Series Servers

3925e ISR G2—2 E-Series Servers

3945 ISR G2—4 E-Series Servers

3945e ISR G2—4 E-Series Servers

ISR 4321—None

ISR 4331—1 E-Series Server

ISR 4351—2 E-Series Servers

ISR 4431—None

ISR 4451-X—2 E-Series Servers

2911 ISR G2—1 NCE

2921 ISR G2—1 NCE

2951 ISR G2—2 NCEs

3925 ISR G2—2 NCEs

3925e ISR G2—2 NCEs

3945 ISR G2—4 NCEs

3945e ISR G2—4 NCEs

ISR 4321—None

ISR 4331—1 NCE

ISR 4351—2 NCEs

ISR 4431—None

ISR 4451-X—2 NCEs

Maximum

Number of

E-Series Servers

or NCE per

Router

3All hardware drives within the E-Series Server must be installed with the same type of storage device: either all SAS drives or

all SATA drives.

4The size of the HDD and SSD drives is expressed in decimal form. For instance, GB=1 billion bytes, not 2^30 bytes. TB=1

trillion bytes, not 2^40 bytes.

Hardware Information for the M3 E-Series Servers

Cisco UCS E Series M3 servers have a dedicated SSD flash disk based on eMMC technology. This eMMC

storage is not a user replaceable component. This replaces the SD card functionality that was used on M2.The

eMMC storage is used for hosting CIMC and is also available as a USB device to the x86 host side. On Cisco

UCS-E160S-M3 server, the size of the CIMC partition is 8 GB, and the size of the host partition is 8 GB.

Table 10: M3 E-Series Servers at a Glance

UCS-E1120D-M3 Double-Wide

E-Series Servers

UCS-E180D-M3 Double-Wide

E-Series Servers

UCS-E160S-M3 Single-Wide E-Series

Servers

Feature

Double-wide SMDouble-wide SMSingle-wide SMForm Factor

Intel Broadwell, 1.5 GHzIntel Broadwell, 2.0 GHzIntel Xeon Broadwell DE processor D-1528

(9-MB cache, 1.90 GHz, and 6 cores)

CPU

12-Cores with 1.5-GHz Clock

Speed

8-Cores with 2.0-GHz Clock

Speed

6-Cores with 1.90-GHz Clock SpeedCPU Cores and

CPU Clock Speed

Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine Hardware Installation Guide

Hardware Information for the M3 E-Series Servers

UCS-E1120D-M3 Double-Wide

E-Series Servers

UCS-E180D-M3 Double-Wide

E-Series Servers

UCS-E160S-M3 Single-Wide E-Series

Servers

Feature

16 - 128 GB

4 DIMM slots, each with 8 GB,

16 GB or 32 GB VLP DDR4

RAM

16 - 128 GB

4 DIMM slots, each with 8 GB,

16 GB or 32 GB VLP DDR4

RAM

8 - 64 GB

2 DIMM slots, each with 8 GB, 16 GB or

32 GB VLP DDR4 RAM

RAM

RAID 0, RAID 1, RAID 5, and

RAID 10

RAID 0, RAID 1, RAID 5, and

RAID 10

Hardware RAID 0 and 1

LSI MegaRAID SAS 3108 controller

RAID

SATA, SAS, SSD, and External

USB

SATA, SAS, SSD, and External

USB

SATA, SAS, SSD, and External USBStorage Type

SAS 10K RPM, SATA 7200

RPM, and SAS SSD

Supports 4 Drives

SAS 10K RPM, SATA 7200

RPM, and SAS SSD

Supports 4 Drives

2 SFF slots; Up to 2 TB each; refer to the

compatibility and ordering guide for more

information.5

Supports 2 Drives

HDD

Refer to the Cisco UCS E-Series

Compatibility and Ordering

Guide for more information.

Refer to the Cisco UCS E-Series

Compatibility and Ordering

Guide for more information.

Refer to the Cisco UCS E-Series

Compatibility and Ordering Guide for more

information.

Storage Capacity

2 x 1GBps (Internal)2 x 1GBps (Internal)2 internal Gigabit Ethernet ports (Broadcom

5719)

Internal Network

Interface

2 USB connector

2 RJ-45 10 Gigabit Ethernett

Interfaces (TE2 and TE3)

1 KVM port (supports VGA, 1

USB, 1 serial DB9)

1 Management Port

TE2 and TE3

interfaces support

only GE switch.

10GBps interfaces

can connect only to

devices with 1GBps

speeds or higher.

Note

2 USB connector

2 RJ-45 10 Gigabit Ethernett

Interfaces (TE2 and TE3)

1 KVM port (supports VGA, 1

USB, 1 serial DB9)

1 Management Port

TE2 and TE3

interfaces support

only GE switch.

10GBps interfaces

can connect only to

devices with 1GBps

speeds or higher.

Note

1 USB connector

2 RJ-45 10 Gigabit Ethernett Interfaces

(TE2 and TE3)

1 KVM port (supports VGA, 1 USB, 1

serial DB9)

TE2 and TE3 interfaces support

only GE switch. 10GBps

interfaces can connect only to

devices with 1GBps speeds or

higher.

Note

External Interfaces

4351,44514351,44514331,4351,4451Router Platforms

ISR 4351—1 E-Series Server

ISR 4451-X—1 E-Series Server

ISR 4351—1 E-Series Server

ISR 4451-X—1 E-Series Server

ISR 4331—1 E-Series Server

ISR 4351—2 E-Series Server

ISR 4451-X—2 E-Series Server

Maximum Number

of E-Series Servers

5All hardware drives within the E-Series Server must be installed with the same type of storage device: either all SAS drives or

all SATA drives.

Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine Hardware Installation Guide

Hardware Information for the M3 E-Series Servers

Hardware Information for the EHWIC E-Series NCE

Table 11: EHWIC E-Series NCE Hardware at a Glance

UCS-EN120EEHWIC E-Series NCEFeature

Double-wide EHWICForm Factor

Intel Atom Processor C2338CPU

2-Cores with 1.7-GHz Clock SpeedCPU Cores and CPU Clock Speed

4 GB to 8 GBRAM

—RAID

mSATAStorage Type

mSATA Flash DriveHDD

50 to 400 GB FormattedStorage Capacity

2 Gigabit Ethernet InterfacesInternal Network Interface

1 Standard USB Connector

1 Mini-USB Connector

1 RJ-45 Gigabit Ethernet Connector

1 Console Port

External Interfaces

1921, 1941, 2901, 2911, 2921, 2951, 3925, 3925e, 3945, 3945eRouter Platforms

1921 ISR G2—1 NCE

1941 ISR G2—1 NCE

2901 ISR G2—2 NCEs

2911 ISR G2—2 NCEs

2921 ISR G2—2 NCEs

2951 ISR G2—2 NCEs

3925 ISR G2—2 NCEs

3925e ISR G2—1 NCE

3945 ISR G2—2 NCEs

3945e ISR G2—1 NCE

Maximum Number of NCEs per Router

Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine Hardware Installation Guide

Hardware Information for the EHWIC E-Series NCE

Andere Handbücher für UCS E Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco Server Handbücher

Cisco

Cisco ONS 15454 SDH Bedienungsanleitung

Cisco

Cisco TelePresence Service-Handbuch

Cisco

Cisco TD 92322GB Bedienungsanleitung

Cisco

Cisco UCS B460 M4 Handbuch

Cisco

Cisco TelePresence Server 7010 Technisches Datenblatt

Cisco

Cisco SE-CL-L3 Bedienungsanleitung

Cisco

Cisco UCS C240 M3 Bedienungsanleitung

Cisco

Cisco MXE 3500 Handbuch

Cisco

Cisco UCS C Series Montageanleitung

Cisco

Cisco UCS C220 Bedienungsanleitung

Cisco

Cisco UCS B420 M3 Handbuch

Cisco

Cisco CSACS-1121-K9 Bedienungsanleitung

Cisco

Cisco TelePresence Service-Handbuch

Cisco

Cisco UCS B200 Handbuch

Cisco

Cisco UCS C24 Montage- und Wartungsanleitung

Cisco

Cisco MCS-7825-H1-IPC1 Bedienungsanleitung

Cisco

Cisco UCS C460 Montage- und Wartungsanleitung

Cisco

Cisco C220 M3 Handbuch

Cisco

Cisco Unity Bedienungsanleitung

Cisco

Cisco 7835-H2 - Media Convergence Server Bedienungsanleitung

Cisco

Cisco UCS B200 M3 Handbuch

Cisco

Cisco C880 M4 Bedienungsanleitung

Cisco

Cisco UCS M3 Series Bedienungsanleitung

Cisco

Cisco APIC M4 Montage- und Wartungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung