Cisco Meraki MS210-24 Bedienungsanleitung

MS210 Series Installation Guide

Model number Description

MS210-24 Stackable Layer-2 24-port gigabit Ethernet switch with 4 SFP interfaces

MS21024P Stackable Layer-2 24-port gigabit Ethernet 370W PoE switch with 4 SFP interfaces

MS210-48 Stackable Layer-2 48-port gigabit Ethernet switch with 4 SFP interfaces

MS210-48LP Stackable Layer-2 48-port gigabit Ethernet 370W PoE switch with 4 SFP interfaces

MS210-48FP Stackable Layer-2 48-port gigabit Ethernet 740W PoE switch with 4 SFP interfaces

Package contents

In addition to the MS switch, the following are provided:

Rack Mount Kit includes:

• US 12-24 mounting screws and cage nuts, 5 of each

• INTL M5 mounting screws and cage nuts, 5 of each

• INTL M6 mounting screws and cage nuts, 5 of each

• Mounting washers

MS210-24 Series front panel

MS210-48 Series front panel

Ports and Status Indicators

The MS uses LEDs to inform the user of the device's status. When the device powers on, all the Internet LEDs flash

twice. Additional functions are described below, from left to right.

Item Function LED Status Meaning

1 Power Solid orange Switch is unable to connect to the Meraki cloud

Flashing white Firmware upgrade in process

Solid white Switch is fully operational and connected to the Meraki cloud

Off Switch does not have power

2 Restore N/A Restore button to clear switch IP and local configuration

settings

3 Switch Ports Off No link is detected on this port

Note: MS210 does not include stacking cables. Stacking cables sold separately.

Solid orange 10/100 Mbps

Solid green 1 Gbps

In addition, there is a RESTORE button available on the front panel.

Insert a paperclip if a restore is required.

• A brief, momentary press: To delete a downloaded configuration and reboot.

• Press and hold for more than 10 sec: To force the unit into a full factory restore.

MS210 Series back panel

Item Function LED Status Meaning

1 Management Interface Green

Connected, used for easy

access to the local status

page

2 Stack Ports Green QSFP stacking cable is

connected

Off No link is detected on this

port

322-Pin Redundant Power

Supply Connector N/A

RPS2300 can be

connected to provide

redundant power in case

of a failover

Power input Power cords may be ordered separately.

Equipment is to be used only in a restricted access location and installed/operated only by trained service personnel.

RPS2300 Redundant Power Supply (Optional)

The MS210 series supports connecting the Cisco RPS2300 for optional power redundancy. MS210 series models

support failover and reversion to main power once it has been restored. The following Cisco part numbers are

supported:

Part number Description

PWR-RPS2300 RPS Chassis

C3K-PWR-750WAC 750W RPS Power supply (see recommendations)

C3K-PWR-1150WAC 1150W RPS Power supply (see recommendations)

CAB-RPS2300-E= RPS 22-pin cable

Bringing your Stack Online

MS210 switches can be connected in a physical stack using dedicated stacking ports and cables. Configuration steps

and additional information about stacking can be found here.

Mounting hardware

The mounting hardware includes a rack mount kit for standard 1U racks. When installing the device, make sure that

there is sufficient space between the rear of the rack and other obstacles to ensure adequate airflow.

Optional Mid-Mount bracket

MS210 48 port models are designed for an optional MA-MNT-MID-1 mid-mount bracket when using 2-post racks.

The MS210 and MS225 series switches additionally support cross-model stacking, meaning an MS210 can be

stacked with an MS225 and vice-versa.

Dieses Handbuch passt für folgende Modelle

Andere Cisco Schalten Handbücher

Cisco

Cisco 3524-PWR - Catalyst XL Enterprise Edition... Bedienungsanleitung

Cisco

Cisco Nexus 9200 Series Bedienungsanleitung

Cisco

Cisco NM-16ESW-PWR= Bedienungs- und Wartungshandbuch

Cisco

Cisco Aironet 350 Series Bedienungsanleitung

Cisco

Cisco Nexus 9348GC-FX3 Handbuch

Cisco

Cisco Catalyst 2960 Series Bedienungsanleitung

Cisco

Cisco Catalyst 3750G-24TS Bedienungs- und Wartungshandbuch

Cisco

Cisco SR216 Bedienungsanleitung

Cisco

Cisco BPX 8600 Series Bedienungsanleitung

Cisco

Cisco WS-C3020 Bedienungsanleitung

Cisco

Cisco InfiniBand 4x Bedienungsanleitung

Cisco

Cisco Small Business SF200-24P Bedienungsanleitung

Cisco

Cisco Meraki MS125 Series Bedienungsanleitung

Cisco

Cisco Nexus 9364C-GX Handbuch

Cisco

Cisco SF-300-24P - Bedienungsanleitung

Cisco

Cisco Catalyst 4500 Series Betriebsanleitung

Cisco

Cisco WS-C6506 Kurzanleitung

Cisco

Cisco HWIC-4ESW - EtherSwitch HWIC Switch Handbuch

Cisco

Cisco NME-16ES-1G-P Abmessungen

Cisco

Cisco Nexus 7000 Series Installations- und Betriebsanleitung

Cisco

Cisco SG200 Series Bedienungsanleitung

Cisco

Cisco Catalyst 2960 Series Bedienungsanleitung

Cisco

Cisco 3750 - Catalyst EMI Switch Bedienungsanleitung

Cisco

Cisco SRW224 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung