Cisco Aironet OfficeExtend AIR-OEAP602I-E-K9 Bedienungsanleitung

REVIEW DRAFT—CISCO CONFIDENTIAL

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Cisco Aironet 600 Series OfficeExtend Access

Point User Guide

The Cisco Aironet 600 Series OfficeExtend Access Point User Guide includes the following

information:

• Unpacking the Cisco Aironet 600 Series OfficeExtend Access Point

• Cisco Aironet 600 Series OfficeExtend Access Point Overview

• Installation Guidelines

• Cisco Aironet 600 Series OfficeExtend Access Point Radio Frequency Coverage

• Understanding Cisco Aironet 600 Series OfficeExtend Access Point LEDs

• Configuring a Personal SSID on a Cisco Aironet 600 Series OfficeExtend Access Point

• Configuring a Primary IP Address on a Cisco Aironet 600 Series OfficeExtend Access Point

• Viewing the Event Log

• Accessing Online Help

• Troubleshooting

• Cisco Aironet 600 Series OfficeExtend Access Point Local Customer Interface

• Declarations of Conformity and Regulatory Information

Unpacking the Cisco Aironet 600 Series OfficeExtend Access

Point

Each Cisco Aironet 600 Series OfficeExtend Access Point package contains the following items:

• Cisco Aironet 600 Series OfficeExtend Access Point

• Ethernet Cable

• Cisco Aironet AP600 Series Power Module (universal power supply)

• Quick reference guide

• Cisco product registration and Cisco documentation feedback cards

REVIEW DRAFT—CISCO CONFIDENTIAL

Cisco Aironet 600 Series OfficeExtend Access Point User Guide

Cisco Aironet 600 Series OfficeExtend Access Point Overview

1Power Connector 5Ethernet [E] LEDs 1 through 4

2Ethernet Ports 1 through 4 6Status LED

3WA N P o r t 7Power Indicator LED

4Power Toggle Switch 8

REVIEW DRAFT—CISCO CONFIDENTIAL

Cisco Aironet 600 Series OfficeExtend Access Point User Guide

Installation Guidelines

To install the Cisco Aironet 600 Series OfficeExtend Access Point, follow these steps:

Step 1 Plug the Ethernet cable into the Ethernet port.

Step 2 Insert the other end of the Ethernet cable into an Ethernet port 1, 2, or 3 of your router.

Note Ethernet port 4 should not be used.

Step 3 Plug the power cord into the power connector.

Step 4 Plug the power cord into your power source.

Step 5 Press the power toggle switch to the on position.

Step 6 Use the 600 Series OfficeExtend Access Point LED table below (Table 1) to better understand the Status

LED and the Ethernet LEDs located on the top panel of the access point.

Note The first time you connect the 600 Series OfficeExtend Access Point, the process may take anywhere

between 2 and 15 minutes due to an image download. If more than 10 access points are joining, the

process could take as long as 60 minutes. When associated, your access point Status LED on the top

panel displays a solid blue.

Note You do not need to configure any SSIDs for your 600 Series OfficeExtend Access Point to connect to

your company’s network. The access point receives the company’s SSID when it connects to the

company network by way of the Internet. If you have any problems connecting to your company’s

network, contact your IT administrator.

You can configure your local SSID WLAN for other devices. See “Configuring a Personal SSID on a

Cisco Aironet 600 Series OfficeExtend Access Point” for more information.

Caution Be careful when handling the 600 Series OfficeExtend Access Point. The bottom may be HOT.

Tip To manage the heat generated from the access point, maintain air flow between the metal plate of the

access point and the surface on which it is placed.

A laptop cooling pad (such as ones containing gel or cooling crystals) is a possible option for an access

point placed on a flat surface. Another option for managing the heat is to hang the access point on a wall.

DSL/Cable

Modem

Router OfficeExtended

Client

275941

REVIEW DRAFT—CISCO CONFIDENTIAL

Cisco Aironet 600 Series OfficeExtend Access Point User Guide

Cisco Aironet 600 Series OfficeExtend Access Point Radio Frequency Coverage

Note Cisco Aironet 600 Series OfficeExtend access points are designed to work behind a router or other

gateway device that is using network address translation (NAT). NAT allows a device, such as a router,

to act as an agent between the Internet (public) and a personal network (private), thereby enabling an

entire group of computers to be represented by a single IP address. In controller software release 6.0,

only one Cisco Aironet 600 Series OfficeExtend access point can be deployed behind a single NAT

device.

Cisco Aironet 600 Series OfficeExtend Access Point Radio

Frequency Coverage

To ensure the best RF coverage for your access point, keep the following in mind:

• Position the access point lower than or with the LED side facing your devices.

Note Most of the coverage area is located towards the LED side of the access point.

• If the access point is in close proximity and above your device, the signal may become skewed.

Understanding Cisco Aironet 600 Series OfficeExtend Access

Point LEDs

You can use the Status LED on the top panel or the Ethernet LED in the cable bay area to assess the unit

status. The table below displays LED status indications for AP600s (Table 1).

Ta b l e 1 LED Status Indications for AP600

Status LED

(Top of Unit)

Ethernet LED

(Cable Bay Area) Description

Off Off Normal bootloader operation.

Off Off Linux start. Evora/CAPWAP start.

Flashing On if a local client is

associated. Otherwise,

off.

CAPWAP Discovery Join in process.

On if CAPWAP is

connected

On if a client is

associated

Association Status.

On Flashing Software Upgrade.

Flashing Flashing out of sequence

from Status LED (LED 1

on, LED 2 off, LED 1 off,

LED2 of)

No IP Address/Ethernet is not up.

Flashing Flashing in sequence

with Status LED

Bootloader warnings.

REVIEW DRAFT—CISCO CONFIDENTIAL

Cisco Aironet 600 Series OfficeExtend Access Point User Guide

Configuring a Personal SSID on a Cisco Aironet 600 Series OfficeExtend Access Point

Configuring a Personal SSID on a Cisco Aironet 600 Series

OfficeExtend Access Point

Follow these steps to log into the GUI of the 600 Series OfficeExtend access point and configure a

personal SSID:

Step 1 Obtain the IP address of your 600 Series OfficeExtend access point from your company’s IT

professional.

Note The default IP address is 10.0.0.1.

Step 2 With the 600 Series OfficeExtend access point connected to your home router, enter the IP address of

the 600 Series OfficeExtend access point in the Address field of your Internet browser

(http:://<ap-ipaddress>) and click Go.

Note Make sure you are not connected to your company’s network using a virtual private network

(VPN) connection.

Step 3 When prompted, enter the username and password to log into the access point.

Note The default username and password are admin and admin.

Step 4 On the 600 Series OfficeExtend Access Point Welcome page, click Enter. The 600 Series Office Extend

Access Point Home page appears (see Figure 1).

REVIEW DRAFT—CISCO CONFIDENTIAL

Cisco Aironet 600 Series OfficeExtend Access Point User Guide

Configuring a Personal SSID on a Cisco Aironet 600 Series OfficeExtend Access Point

Figure 1 Cisco Aironet 600 Series OfficeExtend Access Point Home Page

This page shows the access point name, IP address, AP mode, controller name, MAC address, AP

uptime, and software version.

Step 5 Click Configuration to open the Configuration System page (see Figure 3).

The Configuration System displays general system information, such as username and password for the

access point and radio interface information

REVIEW DRAFT—CISCO CONFIDENTIAL

Cisco Aironet 600 Series OfficeExtend Access Point User Guide

Configuring a Personal SSID on a Cisco Aironet 600 Series OfficeExtend Access Point

Figure 2 Cisco Aironet 600 Series OfficeExtend Access Point Configuration System Page

Step 6 Click the SSID tab to open the Configuration SSID page (Figure 3).

Step 7 Check the Broadcast SSID check box to enable this wireless connection. The default value is disabled.

REVIEW DRAFT—CISCO CONFIDENTIAL

Cisco Aironet 600 Series OfficeExtend Access Point User Guide

Configuring a Personal SSID on a Cisco Aironet 600 Series OfficeExtend Access Point

Figure 3 Cisco Aironet 600 Series OfficeExtend Access Point Configuration SSID Page

Step 8 In the SSID field, enter the personal SSID that you want to assign to this access point. This SSID will

be locally switched.

Tip Your personal SSID WLAN and your company SSID WLAN are different. When you configure

your personal WLAN, use an SSID name that is different from your company’s SSID to help

avoid confusion.

Step 9 From the Security drop-down boxes, enable either WPA, WPA2, WPA+WPA2, or WEP to set the

security type to be used by this access point.

Step 10 If you chose WPA2/PSK (AES) in Step 9, enter an 8- to 38-character WPA2 passphrase in the Secret

field. If you chose 104 bit WEP, enter a 13-character ASCII key in the Key field.

Step 11 Click Apply to commit your changes.

Note If you ever want to use the Cisco Aironet 600 Series OfficeExtend access point for another

application, you can clear this configuration and return the access point to factory default

settings by clicking Clear Config.

REVIEW DRAFT—CISCO CONFIDENTIAL

Cisco Aironet 600 Series OfficeExtend Access Point User Guide

Configuring a Primary IP Address on a Cisco Aironet 600 Series OfficeExtend Access Point

Configuring a Primary IP Address on a Cisco Aironet 600 Series

OfficeExtend Access Point

Follow these steps to configure a primary IP address on your Cisco Aironet 600 Series OfficeExtend

access point.

Step 1 Click the WA N tab to open the Configuration SSID page (Figure 3).

Figure 4 Cisco Aironet 600 Series OfficeExtend Access Point Configuration WAN Page

Step 2 Obtain the IP address of your primary controller from your company’s IT professional.

Step 3 Enter the IP address of the primary controller in the Primary Controller field.

Step 4 Leave the Static IP check box unchecked to allow the WAN IP address to be assigned by DHCP.

Step 5 Click Apply to commit your changes.

Viewing the Event Log

Select Event Log to view the ongoing list of event logs for this access point (Figure 5).

REVIEW DRAFT—CISCO CONFIDENTIAL

Cisco Aironet 600 Series OfficeExtend Access Point User Guide

Accessing Online Help

Figure 5 Cisco Aironet 600 Series OfficeExtend Access Point Event Log Window

Accessing Online Help

Click Help to access the current Cisco Aironet 600 Series OfficeExtend Access Point online help.

Inhaltsverzeichnis

Andere Cisco Drahtloser Zugangspunkt Handbücher

Cisco

Cisco WAP125 Bedienungsanleitung

Cisco

Cisco Aironet 1520 Series Bedienungsanleitung

Cisco

Cisco Meraki MR45 Bedienungsanleitung

Cisco

Cisco Meraki MR46E Bedienungsanleitung

Cisco

Cisco Aironet 1700 Kurzanleitung

Cisco

Cisco CISCO673-RF - 673 Router Bedienungsanleitung

Cisco

Cisco 1262 Bedienungsanleitung

Cisco

Cisco AP541N-A-K9 Bedienungsanleitung

Cisco

Cisco 1142 - Aironet Standalone AP Bedienungsanleitung

Cisco

Cisco aironet 1810 series Bedienungsanleitung

Cisco

Cisco Linksys WAP610N Bedienungsanleitung

Cisco

Cisco Aironet 1240AG Series Handbuch

Cisco

Cisco MERAKI MR66 Bedienungsanleitung

Cisco

Cisco Meraki MR76 Bedienungsanleitung

Cisco

Cisco GR10-HW-EU Bedienungsanleitung

Cisco

Cisco Aironet 2802E Bedienungsanleitung

Cisco

Cisco Catalyst 9130 Bedienungsanleitung

Cisco

Cisco WAP121 Bedienungsanleitung

Cisco

Cisco Catalyst Wireless 9164I Series Bedienungsanleitung

Cisco

Cisco Catalyst IW6300 Series Handbuch

Cisco

Cisco Cisco Aironet Wireless LAN Client Bedienungsanleitung

Cisco

Cisco AIR-BR1310G-A-K9-R - Aironet 1310 Outdoor Access... Bedienungsanleitung

Cisco

Cisco MERAKI MR72 Handbuch

Cisco

Cisco Wap581 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung