Cisco Catalyst 9130 Bedienungsanleitung

Introduction to Cisco Catalyst 9130 Access Point

with 9104 Stadium Antenna

This document describes the Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna

(C-ANT9104) and provides electrical specifications and mounting instructions. The antenna is an eight-port

polarization-diverse, ultralow sidelobe patch array that operates over the 2.4-GHz and supports dual 5-GHz

Wi-Fi bands. At 5-GHz, the antenna supports beamwidth switching as well as beam steering. The antenna

supports stadiums, large public venues. It ships with an articulating mount for flat surfaces and masts and is

adjustable in horizontal and vertical planes.

• The C9130AXE-x part number is a certified indoor access point.

• The C9130AXE-STA-x bundle, consisting of the C9130AXE-x AP and C-ANT9104 antenna, is a

factory-assembled bundle and is protected from weather elements for use in indoor or outdoor

environments such as arenas and stadiums.

Note

•Technical Specifications, on page 2

•Azimuth and Elevation Radiation Patterns, on page 3

•Safety Precautions, on page 6

•Installation Notes, on page 7

•Contents of the Antenna and Bracket Kit, on page 8

•Dimensions of the Antenna and Brackets, on page 9

•Installing the Antenna, on page 12

•Mounting on a Wall or Ceiling Using Articulating Bracket, on page 14

•Mounting on a Pole or Mast, on page 17

•Grounding the Antenna, on page 18

•Connecting an Ethernet Cable to the Access Point, on page 19

•Painting the Antenna, on page 22

•Installing the Solar Shield, on page 23

Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna

Technical Specifications

IoT5-GHz Narrow

Beamwidth

20°

5-GHz Narrow

Beamwidth

10°

5-GHz Narrow

Beamwidth

Boresight

5-GHz Wide

Beamwidth

2.4-GHzParameters

50 Ohms50 Ohms50 Ohms50 Ohms50 Ohms50 OhmsNominal

Input

Impedance

2:12:12:12:12:12:1Voltage

Standing

Wave Ratio

(VSWR)

6 dBi10 dBi10 dBi10 dBi7 dBi6 dBiPeak Gain

Vertically

Polarized

Ports A, C, E,

and G are

vertically

polarized

Ports A, C, E,

and G are

vertically

polarized

Ports A, C, E,

and G are

vertically

polarized

Ports A, C, E,

and G are

vertically

polarized

Ports A and C

are vertically

polarized

Polarization

Ports B, D, F,

and H are

horizontally

polarized

Ports B, D, F,

and H are

horizontally

polarized

Ports B, D, F,

and H are

horizontally

polarized

Ports B, D, F,

and H are

horizontally

polarized

Ports B and D

are

horizontally

polarized

70°25°

25°25°80°70°3–dB

Beamwidth

Azimuth

70°25°25°25°25°70°3–dB

Beamwidth

Elevation

NA-30 dBr-30 dBr-30 dBr-21 dBrNASidelobe

Level

-15 dBr-30 dBr-30 dBr-30 dBr-20 dBr-15 dBrFront-to-Back

Ratio

RJ45 PoEConnector

Type

23.5 in. (59.70 cm)Width

18.2 in. (46.23 cm)Height

5.8 in. (14.8 cm)Depth

15.5 lbs (7.03 Kg)Weight

Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna

Technical Specifications

IoT5-GHz Narrow

Beamwidth

20°

5-GHz Narrow

Beamwidth

10°

5-GHz Narrow

Beamwidth

Boresight

5-GHz Wide

Beamwidth

2.4-GHzParameters

IP65Water/Foreign

Body Ingress

100 mphOperational

Wind

No solar loading: -20°C to 60°C (-4°F to 140°F)

With solar loading and solar cover: up to 50°C (122°F)

Operating

Temperature

Range

-40°C to 70°C (-40°F to 158°F)Storage

Temperature

Range

Azimuth and Elevation Radiation Patterns

The following illustrations show the C-ANT9104= antenna radiation patterns:

Figure 2: C9104–Antenna Radiation Pattern Slot0 Radio (2.4-GHz

Elevation)

Figure 1: C9104–Antenna Radiation Pattern Slot0 Radio (2.4-GHz

Azimuth)

Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna

Azimuth and Elevation Radiation Patterns

Figure 4: C9104–S1-S2 Narrow 10° Pattern (5-GHz Azimuth)Figure 3: C9104–S1-S2 Narrow 0° Pattern (5-GHz Azimuth)

Figure 6: C9104–S1-S2 Wide Radiation Pattern (5-GHz Elevation)Figure 5: C9104–S1-S2 Narrow 0° Pattern (5-GHz Elevation)

Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna

Azimuth and Elevation Radiation Patterns

Figure 8: C9104–S1-S2 Wide Radiation Pattern (5-GHz Azimuth)Figure 7: C9104–S1-S2 Narrow 20° Pattern (5-GHz Azimuth)

Figure 10: C9104–IoT Antenna Radiation Pattern (2.4-GHz Elevation)Figure 9: C9104–IoT Antenna Radiation Pattern (2.4-GHz Azimuth)

Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna

Azimuth and Elevation Radiation Patterns

Figure 12: C9104–AUX RF ASIC Wide Antenna Radiation Pattern

(Elevation)

Figure 11: C9104–AUX RF ASIC Wide Antenna Radiation Pattern

(Azimuth)

Safety Precautions

Installation of this antenna near power lines is dangerous. For your safety, follow the installation directions.

Danger

Each year, hundreds of people are killed or injured when attempting to install an antenna. In many of these

cases, the victim was aware of the danger of electrocution but did not take adequate steps to avoid the hazard.

For your safety and to help you achieve a sound installation, read and follow these safety precautions. They

may save your life!

• If you are installing an antenna for the first time, for your safety and that of others, seek professional

assistance. Your Cisco sales representative can explain which mounting method to use for the size and

type of antenna you are about to install.

• Select your installation site with safety and performance in mind. Remember that electric power lines

and phone lines look alike. For your safety, assume that any overhead line can kill you.

• Call your electric power company. Tell them your plans and ask them to come and look at your proposed

installation. It is a minor inconvenience considering your life is at stake.

• Plan your installation carefully and thoroughly before you begin. Successful raising of a mast or tower

is essentially a matter of coordination. Assign each person a specific task and know what to do and when

to do it. One person should be in charge of the operation to issue instructions and watch for signs of

trouble.

• When installing your antenna, remember:

•Do not use a metal ladder.

Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna

Safety Precautions

•Do not work on a wet or windy day.

•Do dress properly: shoes with rubber soles and heels, rubber gloves, long–sleeved shirt, or jacket.

• If the assembly starts to drop, get away from it and let it fall. Remember, the antenna, mast, cable, and

metal guy wires are all excellent conductors of electrical current. The slightest touch of these parts to a

power line completes an electrical path through the antenna and the installer: You!

•If any part of the antenna system should contact a power line, don’t touch it or remove it yourself. Instead,

call your local power company. They would remove it safely.

• If an accident occurs with the power lines, call for qualified emergency help immediately.

For a listing of all the warning statements and their translations, see Translated Safety Warnings for Cisco

Aironet Access Points at:

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/warnings/reference/guide/ap_warn1.html

Installation Notes

Antennas transmit and receive radio signals susceptible to RF obstructions and common sources of interference

that can reduce throughput and the range of the device connected with them. Therefore, follow these guidelines

to ensure the best possible performance:

• Keep the antenna away from metal obstructions such as:

• Heating

• Air-conditioning ducts

• Large ceiling trusses

• Building superstructures

• Major power cabling runs

If necessary, use a rigid conduit to lower the antenna away from these obstructions.

• In an outdoor environment, connect the antenna to a lightning arrestor and ensure proper grounding.

• The density of the materials used in a building’s construction determines the number of walls the signal

can pass through and maintains adequate signal strength. Consider the following before choosing the

location for your antenna:

• Signals penetrate paper and vinyl walls with little change to signal strength.

•Signals penetrate only one or two solid and precast concrete walls without degrading signal strength.

• Signals penetrate three or four concrete and woodblock walls without degrading signal strength.

•Signals penetrate five or six walls constructed of drywall or wood without degrading signal strength.

• Signals are likely to reflect off a thick metal wall and may not penetrate it at all.

• Signals are likely to reflect off a chain–link fence or wire mesh spaced between 1 and 1 1/2 inches.

(2.5 cm and 3.8 cm) The fence acts as a harmonic reflector that blocks the signal.

Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna

Installation Notes

• Install the antenna away from microwave ovens and 2-GHz cordless phones. These products can cause

signal interference because they operate in the same frequency range as the device.

• Console access using the console port

We recommend that you use a console cable that is one meter or less in length.

The AP may face issues while booting if you use an unterminated console cable

(not plugged into any device or terminal) or a console cable that is more than one

meter in length.

Note

Contents of the Antenna and Bracket Kit

Figure 13: Contents of the Antenna Bracket Kit

Tightening ValuesQuantityPartItem #

—2Mounting Flange1

—1Mounting Arm2

20.0 +/- 1.0 Nm4M8 x 20 screws3

25.0 +/- 1.0 Nm2M8 nut4

5.5 to 6.0 Nm2Hose Clamp (mast/pole mount only)5

Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna

Contents of the Antenna and Bracket Kit

Tightening ValuesQuantityPartItem #

3.0 to 3.5 Nm2Set screws (mast/pole mount only)6

Dimensions of the Antenna and Brackets

The dimensions noted in the following illustrations are all in millimeters, unless noted otherwise.

Figure 14: Dimensions of the Antenna with Brackets and Cables

The pressure vent and mounitng screw hole locations at the back of the antenna.

Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna

Dimensions of the Antenna and Brackets

Figure 15: Locations of Screw Holes and Pressure Vent at the Back of the Antenna

The mounting hole location on the articulating mount flange.

VESA 75 mount pattern3Pressure Vent1

Tether anchor4Grounding Point2

View the assembly of the Cisco C-ANT9104 antenna with the Cisco Catalyst 9130AX AP.

Removing back plate will void product warranty.

Note

Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna

Dimensions of the Antenna and Brackets

Inhaltsverzeichnis

Andere Cisco Drahtloser Zugangspunkt Handbücher

Cisco

Cisco Meraki MR12 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Cisco

Cisco AIR-AP1251AG-A-k9 Handbuch

Cisco

Cisco Aironet 3700 Series Bedienungsanleitung

Cisco

Cisco WAP4410N - Small Business Wireless-N Access... Bedienungsanleitung

Cisco

Cisco WAP121 Bedienungsanleitung

Cisco

Cisco WAP321 Bedienungsanleitung

Cisco

Cisco AT&T U-VERSE VEN401 Bedienungsanleitung

Cisco

Cisco Meraki Go GR62 Bedienungsanleitung

Cisco

Cisco MR18 Bedienungsanleitung

Cisco

Cisco Aironet 1200 Series Handbuch

Cisco

Cisco Meraki MR70 Bedienungsanleitung

Cisco

Cisco Meraki MR52 Bedienungsanleitung

Cisco

Cisco Meraki MR36-HW Handbuch

Cisco

Cisco Linksys Wireless-G WBP54GV2 Bedienungsanleitung

Cisco

Cisco 1522AG - Aironet Lightweight Outdoor Mesh Access... Bedienungsanleitung

Cisco

Cisco WUMC710 Bedienungsanleitung

Cisco

Cisco Aironet 1600 Series Bedienungsanleitung

Cisco

Cisco FM PONTE-50 Handbuch

Cisco

Cisco AIR-AP1572IC Handbuch

Cisco

Cisco Aironet 1520 Series Bedienungsanleitung

Cisco

Cisco 1130AG - Aironet - Wireless Access Point Handbuch

Cisco

Cisco Meraki MR42 Bedienungsanleitung

Cisco

Cisco Linksys WAP610N Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung