Cisco WAP4410N - Small Business Wireless-N Access... Bedienungsanleitung

Data Sheet

Cisco WAP4410N Wireless-N Access Point:

PoE/Advanced Security

Cisco Small Business Access Points

Advanced, High-Performance Wireless Access for the Small Business

Highlights

●Supports high-bandwidth applications with the 802.11n standard; backward compatible with

802.11b and g devices

●Connects to Power over Ethernet devices, simplifying installation and eliminating the need

for and cost of installing external power supplies

●Protects business information with enhanced security, including rogue access point

detection, advanced encryption, and select access filters

●Simplifies installation and configuration with easy-to-use web interface

Figure 1. Cisco WAP4410N Wireless-N Access Point: PoE/Advanced Security

Product Overview

With the growth of high-bandwidth applications, such as storage and video, in the workplace,

network performance is essential. Wireless technology is no longer lagging behind wired

performance. The Cisco®WAP4410N Wireless-N Access Point (Figure 1) answers the growing

business need for access, speed, and security.

The Cisco Wireless-N Access Point lets you connect Wireless-N (802.11n), Wireless-G (802.11g),

and Wireless-B (802.11b) devices to your wired network, so you can add PCs to the network with

no cabling hassle. Power over Ethernet (PoE) support makes the access point easy to install - you

can mount it anywhere, even without ready access to a power plug. With appropriate PoE support

at the other end, you need to run only one cable to the access point to deliver both data and

power. Of course, you can also use the included AC adapter if power is available nearby.

Data Sheet

Moreover, the integrated quality of service (QoS) features provide consistent voice and video

quality on both the wired and wireless networks, enabling the deployment of business-quality voice

over IP (VoIP) and video applications.

To protect your data and privacy, the Cisco Wireless-N Access Point supports the industrial-

strength wireless security of Wi-Fi Protected Access (WPA), encoding all your wireless

transmissions with powerful encryption. The MAC address filter lets you decide exactly who has

access to your wireless network, and advanced logging keeps you apprised of access attempts.

The rogue access point detection capability notifies the administrator when an unauthorized

access point is detected in the airspace. The WPS (Wi-Fi Protected Setup) feature facilitates

simple and secure deployment of security in the wireless network. Configuration is a snap with the

web browser-based configuration utility.

The Cisco WAP4410N Wireless-N Access Point is the best way to add wireless access to your

existing business network.

Features

●Draft 802.11n wireless networking delivers greater throughput and extended range,

maximizing the number of wireless clients per access point for your small business

●Easy installation and configuration via a web interface

●Adjustable and removable dipole antennas with multiple-input, multiple-output (MIMO) 3x3

diversity

●Gigabit Ethernet LAN interface

●Supports PoE and external DC power

●HTTP Redirect facilitates the display of a splash page on initial user access

●IPv6 host support for managing the access point over IPv6

●Multiple basic service set identifier (BSSID) support allows the creation of multiple secure

wireless workgroups for users and guests

●Service set identifier (SSID) to VLAN mapping maintains application security and quality

across wireless and wired

●WPS allows for simple and secure deployment of the wireless network

●Logging via syslog, email, or local log

●Wi-Fi Multimedia (WMM) wireless QoS support

Specifications

Table 1 lists the specifications, package contents, and minimum requirements for the Cisco

WAP4410N Wireless-N Access Point.

Table 1. Specifications for the Cisco WAP4410N Wireless-N Access Point: PoE/Advanced Security

Specifications

Standards Draft IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3af

(Power over Ethernet), 802.1x (security authentication), 802.11i security WPA/WPA2,

WMM

Ports Ethernet, Power

Buttons Reset

Cabling type Unshielded twisted pair (UTP) Category 5e or higher

LEDs Power, Ethernet, Wireless, PoE

Data Sheet

Operating system Linux

Setup/Configuration

Web user interface Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)

Management

Simple Network Management

Protocol (SNMP) version SNMP version 1, 2c

Event logging ●Event logging

●Email logging

●Remote syslog

Web firmware upgrade Firmware upgradeable through web browser

Diagnostics. Flash, RAM, LAN, WLAN

Dynamic Host Configuration

Protocol (DHCP) DHCP client

HTTP Redirect Redirects initial user access to an external web server to display company logo or network

usage policy

IPv6 host ●Support for management and control of access point over IPv6

●Supports RFC2460 (IPv6 protocol) and RFC4294 (IPv6 node requirements)

Network Capabilities

Multiple BSSID Supports up to 4 BSSIDs, allowing the creation of multiple virtual access points

VLANs Supports 802.1q - up to 4 VLANs

SSID to VLAN mapping Supports mapping of SSIDs to VLANs to securelyseparate workgroups across wireless

and wired domains

Spanning Tree Supports 802.1d Spanning Tree Protocol to prevent loops when using wireless distribution

system (WDS) links as redundant links in a distribution system

Operating modes Access point mode, point-to-point bridge mode, point-to-multipoint bridge mode, repeater

mode, wireless client mode

Load balancing Allows bandwidth control with user-defined CPU usage ratios

Auto-channel selection On boot-up, the access point selects the least congested channel

802.11d regulatory domain Enables the access point to provide radio channel settings for client devices, facilitating

easy client access as they move across regulatory domains

Security

WEP/WPA/WPA2 Wired Equivalent Privacy (WEP) 64-bit/128-bit, WPA-Pre-Shared Key (WPA-PSK), WPA2-

PSK, WPA-ENT, WPA2-ENT

Access control Wireless connection control: MAC-based

SSID broadcast SSID broadcast enable/disable

Client isolation Supports wireless client isolation between and within SSIDs

802.1X Wireless clients can be authenticated through IEEE 802.1X

802.1X supplicant Supports 802.1X supplicant on the Ethernet port to allow the access point to authenticate

itself to the network

RADIUS server Up to 2 RADIUS servers can be configured for redundancy purposes

WPS Supports WPS, a WI-FI Alliance specification for simple and secure setup of a wireless

network

Rogue access point detection New access points detected that have not been categorized as known are logged as rogue

access points, allowing the administrator to clamp down on unapproved devices in the

network

Quality of Service

QoS ●4 queues

●802.1p VLAN priority

●WMM wireless priority

●Mapping of 802.1p VLAN priority to WMM wireless priorityto maintain end-to-end QoS

Wireless

Spec/modulation Radio and modulation type: 802.11b/DSSS, 802.11g/OFDM, 802.11n/OFDM

Channels Operating channels: 11 North America, 13 most of Europe (ETSI and Japan)

Data Sheet

Internal antennas None

External antennas 3 (omnidirectional)

Transmit power Transmit power @ normal temp range for FCC:

802.11b: 16 dBm @ 1TX, 19 dBm @ 2TX, 20.5 dBm @ 3TX

802.11g: 13 dBm @ 1TX, 16 dBm @ 2TX, 17.5 dBm @ 3TX

802.11n: 17 dBm @ 1TX @ MCS0~5/8~13, 13 dBm @ 1TX @ MCS6/14,

11 dBm @ 1TX @ MCS7/15, 20 dBm @ 2TX@MCS0~5/8~13,

16 dBm @ 2TX @ MCS6/14, 14 dBm @ 2TX @ MCS7/15,

21.5 dBm @ 3TX@MCS0~5/8~13, 17.5 dBm @ 3TX @ MCS6/14,

15.5 dBm @ 3TX @ MCS7/15

Transmit power @ normal temp range for ETSI:

11b/g/n: 13 dBm @ 1TX, 16 dBm @ 2TX, 17.5 dBm @ 3TX

Antenna gain in dBi 2

Receiver sensitivity 802.11.n: 300 Mbps at -69dBm

802.11.g: 54 Mbps at -73dBm

802.11.b: 11 Mbps at -88dBm

Environmental

Dimensions

W x H x D 6.69 x 6.69 x 1.60 in.

(170 x 170 x 40.7 mm)

Weight 0.86 lb (39 kg)

Power ●12V 1A DC input, and IEEE 802.3af compliant PoE

●Max power draw: 10.1W

Certification FCC, CE, IC

Operating temperature 32°to 104°F (0°to 40°C)

Storage temperature -4°to 158°F (-20°to 70°C)

Operating humidity 10% to 85%, noncondensing

Storage humidity 5% to 90%, noncondensing

Package Contents

●Cisco WAP4410N Wireless-N Access Point with PoE

●User guide on CD-ROM

●Ethernet network cable

●Power adapter

●Product stands

●Registration card

Minimum Requirements

●802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC

●Switch/router with PoE support or PoE injector when used with PoE

●Web-based configuration: Java-enabled web browser

Product Warranty

3-year limited hardware warranty with return to factory replacement and 90-day limited software warranty.

Cisco Limited Warranty for Cisco Small Business Series Products

This Cisco Small Business product comes with 3-year limited hardware warranty with return to

factory replacement and a 90-day limited software warranty. In addition, Cisco offers software

application updates for bug fixes and telephone technical support at no charge for the first 12

months following the date of purchase. To download software updates, go to:

http://www.cisco.com/go/smallbiz.

Product warranty terms and other information applicable to Cisco products are available at

http://www.cisco.com/go/warranty.

Data Sheet

For More Information

For more information on Cisco Small Business products and solutions, visit:

http://www.cisco.com/smallbusiness.

Printed in USA C78-501860-00 11/08

Andere Handbücher für WAP4410N - Small Business Wireless-N Access...

Inhaltsverzeichnis

Andere Cisco Drahtloser Zugangspunkt Handbücher

Cisco

Cisco Meraki CW9163E Bedienungsanleitung

Cisco

Cisco Linksys WET610N Bedienungsanleitung

Cisco

Cisco Catalyst IW9167I Handbuch

Cisco

Cisco WAP121 Bedienungsanleitung

Cisco

Cisco WAP131 Bedienungsanleitung

Cisco

Cisco WAP4410N - Small Business Wireless-N Access... Bedienungsanleitung

Cisco

Cisco Mesh Access Points Kurzanleitung

Cisco

Cisco AP-702W Kurzanleitung

Cisco

Cisco Aironet 1600 Series Kurzanleitung

Cisco

Cisco Aironet 521 Bedienungsanleitung

Cisco

Cisco DPH650 Bedienungsanleitung

Cisco

Cisco WAP150 Bedienungsanleitung

Cisco

Cisco 1522AG - Aironet Lightweight Outdoor Mesh Access... Bedienungsanleitung

Cisco

Cisco Aironet 1300 Series Handbuch

Cisco

Cisco Aironet 1570 Series Bedienungsanleitung

Cisco

Cisco WAP121 Bedienungsanleitung

Cisco

Cisco 1552S Bedienungsanleitung

Cisco

Cisco Catalyst IW6300 Series Handbuch

Cisco

Cisco Aironet 1240AG Series Handbuch

Cisco

Cisco MERAKI MR66 Bedienungsanleitung

Cisco

Cisco MERAKI MR34 Bedienungsanleitung

Cisco

Cisco ASA 5506-X Bedienungsanleitung

Cisco

Cisco Catalyst 9130 Bedienungsanleitung

Cisco

Cisco AIR-AP1232AG-A-K9 - Aironet 1230AG - Wireless Access... Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung