Cisco WET200 Wireless-G Business Ethernet Bridge Bedienungsanleitung

Data Sheet

Cisco WET200 Wireless-G Business Ethernet Bridge

Cisco Small Business Access Points

High-Speed Wireless Bridging for Small Businesses with Multiple Locations

Highlights

●Securely connects separate wired networks spanning different locations

●Connects to Power over Ethernet devices, simplifying installation and eliminating the need

for and cost of installing external power supplies

●Increases wireless throughput and range and reduces “dead spots” in the wireless

coverage area with RangeBooster technology

●Protects business information with enhanced security and advanced encryption

Figure 1. Cisco WET200 Wireless-G Business Ethernet Bridge

Product Overview

The Cisco®WET200 Wireless-G Business Ethernet Bridge (Figure 1) transparently bridges

separate Ethernet networks together wirelessly and is ideal for small businesses with offices and

resources that are in different office suites of a building or in closely adjacent buildings. The

WET200 is a Power over Ethernet (PoE) end device, so it can be installed anywhere an Ethernet

cable can be run if there is no ready access to a power outlet. PoE enables delivery of both data

and power to the Cisco WET200. An AC adapter is also included for use if the device installation

site has a power outlet nearby.

Advanced security features include Wi-Fi Protected Access (WPA2) with up to 256-bit Advanced

Encryption Standard (AES) encryption using Extensible Authentication Protocol (EAP), giving small

businesses the protection they need to communicate and transfer data securely. The integrated

quality of service (QoS) features provide consistent voice and video quality on both the wired and

Data Sheet

wireless networks, enabling the deployment of business-quality voice over IP (VoIP) and video

applications.

Additional support for VLANs, Simple Network Management Protocol (SNMP), Spanning Tree

Protocol, and port mirroring make this an ideal solution for network administrators to incorporate

into larger organizations.

RangeBooster technology is a compatible add-on to standard Wireless-G that nearly doubles the

wireless signal range and increases throughput by up to 35 percent. Unlike ordinary wireless

technologies that are hampered by signal reflections, RangeBooster devices use smart antennas

and embedded processors to detect and decode reflected signals to enhance and boost data

throughput. This capability also helps to reduce or eliminate “dead spots” within the wireless

coverage area.

Features

●5-port 10/100 BASE-T Ethernet managed switch, autosensing half/full duplex and medium

dependent interface (MDI) and MDI crossover (MDI-X)

●Supports 802.11b and 802.11g wireless connection to access point

●Easy installation and configuration via a web interface

●Supports Wired Equivalent Privacy (WEP), WPA Pre-Shared Key (WPA-PSK), WPA2-PSK,

WPA-ENT, and WPA2-ENT wireless encryption

●Supports 802.1X, Extensible Authentication Protocol Transport Layer Security (EAP-TLS),

and Protected EAP (PEAP) authentication with RADIUS server

●SMA detachable dipole antennas with 1x2 multiple-input, multiple-output (MIMO) to

increase coverage

●Supports PoE or external DC power

●Supports SNMP and features an intuitive web-based interface

●Support 802.1Q and port-based VLAN on LAN switch - 1 VLAN bridged over wireless

●Support 802.1p, IP type of service (ToS), and differentiated services code point (DSCP)

based QoS on LAN switch

●Supports rate limiting on both wired switch and wireless interface

●Supports Spanning Tree Protocol, port mirroring, and MAC-based access control lists

(ACLs)

Specifications

Table 1 lists the specifications, package contents, and minimum requirements for the Cisco

WET200 Wireless-G Business Ethernet Bridge.

Table 1. Specifications for the Cisco WET200 Wireless-G Business Ethernet Bridge

Specifications

Standards IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3af (PoE), 802.1p (QoS

priority), 802.1Q (VLAN), 802.1X (security authentication), 802.11i ready (security WPA2),

802.11e ready (wireless QoS)

Ports Five 10/100 BASE-T Ethernet, 12V DC power

Buttons Reset

Cabling type Unshielded twisted pair (UTP) Category 5

LEDs Power, PoE, Wireless, Ethernet 1-5

Data Sheet

Operating system Linux

Setup/Config

Web user interface Built in web user interface for easy browser-based configuration (HTTP/HTTPS)

Management

SNMP version SNMP version 1, 2c, 3

Web firmware upgrade Firmware upgradable through web browser

Dynamic Host Configuration

Protocol (DHCP) DHCP client

Operating Modes

Wireless client Infrastructure or ad hoc

Wireless

Spec/modulation Radio and modulation type: 802.11b/DSSS, 11g/OFDM

Channels Operating channels: 11 North America, 13 most of Europe (ETSI and Japan)

Internal antennas None

External antennas 2 (omnidirectional) SMA detachable

Transmit power Transmit power (adjustable) at normal temperature range: 802.11b: 12 ±1 dBm; 802.11g:

16 ± 1 dBm

Antenna gain in dBi 2

Receiver sensitivity 11g: 54 Mbps at -69 dBm, 11b: 11 Mbps at -82 dBm

Security

WEP/WPA/WPA2 WEP 64-bit/128-bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT

Access control MAC-based ACL between wired and wireless interfaces

802.1X IEEE 802.1X support

Quality of Service

QoS ●4 queues

●Queue mapping on ingress based on default priority, 802.1p tag, DSCP, and IP ToS

●Rate limiting on both ingress and egress direction

●Wi-Fi Multimedia (WMM) priority settings for wireless egress

General

●16 VLAN groups

●256 MAC address entries across wireless bridge

●1024 MAC address entries in the switch

Environmental

Dimensions

W x H x D 6.69 x 8.07 x 7.68 in.

(170 x 205 x 195 mm)

Weight 12.17 oz (345 g)

Power 12V 0.5A DC input and IEEE 802.3af-compliant PoE

Maximum power draw: 4.2W

Certification FCC, ICES-003, CE

Operating temperature 32º to 104ºF (0º to 40ºC)

Storage temperature -4º to 158ºF (-20º to 70ºC)

Operating humidity 10% to 85% noncondensing

Storage humidity 5% to 90% noncondensing

Data Sheet

Package Contents

●Cisco WET200 Wireless-G Business Ethernet Bridge

●2 SMA detachable dipole antennas

●User guide on CD-ROM

●Quick installation guide

●Ethernet network cable

●Power adapter

●Product stands

●Registration card

Minimum Requirements

●PC or devices with Ethernet port

●802.11b or 802.11g wireless access point

●Switch/router with PoE support or PoE injector when used with PoE

●Web-based configuration: Java-enabled web browser

Product Warranty

3-year limited hardware warranty with return to factory replacement and 90-day limited software warranty.

Cisco Limited Warranty for Cisco Small Business Series Products

This Cisco Small Business product comes with a 3-year limited hardware warranty with return to

factory replacement and a 90-day limited software warranty. In addition, Cisco offers software

application updates for bug fixes and telephone technical support at no charge for the first 12

months following the date of purchase. To download software updates, go to:

http://www.cisco.com/go/smallbiz.

Product warranty terms and other information applicable to Cisco products are available at

http://www.cisco.com/go/warranty.

For More Information

For more information on Cisco Small Business products and solutions, visit:

http://www.cisco.com/smallbusiness.

Printed in USA C78-501862-00 11/08

Inhaltsverzeichnis

Andere Cisco Drahtloser Zugangspunkt Handbücher

Cisco

Cisco Aironet 1140 Series Bedienungsanleitung

Cisco

Cisco CISCO673-RF - 673 Router Bedienungsanleitung

Cisco

Cisco Aironet 521 Bedienungsanleitung

Cisco

Cisco Aironet 521 Bedienungsanleitung

Cisco

Cisco Aironet 1140 Series Bedienungsanleitung

Cisco

Cisco Aironet 3500 Series Bedienungsanleitung

Cisco

Cisco 1700 series Handbuch

Cisco

Cisco WAP121 Bedienungsanleitung

Cisco

Cisco 1130AG - Aironet - Wireless Access Point Handbuch

Cisco

Cisco Aironet 1600 Series Kurzanleitung

Cisco

Cisco Aironet 3600 Series Bedienungsanleitung

Cisco

Cisco WAP2000 Bedienungsanleitung

Cisco

Cisco aironet 2800 series Kurzanleitung

Cisco

Cisco Catalyst IW9167E Handbuch

Cisco

Cisco 1242AG - Aironet - Wireless Access Point Handbuch

Cisco

Cisco WAP361 Bedienungsanleitung

Cisco

Cisco WAP121 Bedienungsanleitung

Cisco

Cisco Meraki MR42E Bedienungsanleitung

Cisco

Cisco Catalyst 9136I Series Bedienungsanleitung

Cisco

Cisco Aironet 1520 Series Bedienungsanleitung

Cisco

Cisco Catalyst 9166 Series Handbuch

Cisco

Cisco Meraki MR45 Bedienungsanleitung

Cisco

Cisco Wap581 Bedienungsanleitung

Cisco

Cisco 1552S Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung