Citizen REF CH-611C Bedienungsanleitung

DIASTOLIC

mmHg

PULSE/ min

SYSTOLIC

mmHg

CH-611C

SELECT

START

POWER

MEMORY

INSTRUCTION MANUAL

FOR

DIGITAL BLOOD PRESSURE MONITOR

REF CH-611C

English

IDENTIFICATION OF PARTS

Systolic blood pressure

display section

Diastolic blood pressure/

Pulse display section

Memory reset switch

Battery cover

Air hose Hose plug Hose

socket

Wrist

cuff

Power switch

Start switch

Memory recall switch

Pressure setting switch

- Eng 1 -

Measuring method:

Indication:

Measuring range:

Accuracy:

Inflation:

Pressurization setting:

Deflation:

Exhaust:

Memory function:

Power source:

Battery life:

Rated voltage:

Working temp. & humidity:

Storage temp. & humidity:

Outside dimensions:

Weight:

Electric shock protection:

Accessories:

*Specifications may be changed without notice in the event of improvements being made.

SPECIFICATIONS

Oscillometric system

Digital display, Height: 19mm

Pressure; 0 ⬃280mmHg, Pulse; 40 ⬃200 beat/min.

Pressure; ±3mmHg, Pulse; ±5%

Automatic inflation by internal pump

4 stage: 160, 200, 240, 280mmHg

Automatic constant speed deflation system

Quick exhaust by electromagnetic valve

7 data

4 “AA” (R6P, LR6) batteries

Approx. 1000 times/LR6 Approx. 350 times/R6P

(once a day, 160mmHg, room temp. 22°C)

6V DC

+10°C ⬃+40°C, 30% ⬃85%RH

–20°C ⬃+60°C, 10% ⬃95%RH

111mm(W) ×178mm(D) ×73mm(H)

Approx. 470g (Apparatus batteries and cuff)

Type B equipment

Cuff, 4 “AA” (R6P) batteries, Instruction manual

- Eng 2 -

After cleaning the cuff with a neutral detergent, lightly rinse it with wa-

ter and let it dry in the air. Hard rubbing or washing in a washing

machine will cause air leakage. Also, be careful not to get water into

the air hose.

General Remarks on blood pressure measurement

• If the cuff is to be deflated quickly, depress “POWER” switch.

• The attached cuff is suited for a wrist circumstance of 13.5cm to

19.5cm.

• When attaching the cuff, rubber cuff hose should be placed on the

inside of your wrist.

• Self measurement is no therapy! In no case may you change the dos-

age of medication prescribed by your physician.

• In operation for blood pressure measurement, you should urinate

and should remain relatively still for 10 to 15 minutes prior to mea-

surement.

• Exercise, eating and drinking, smoking, etc., prior to measurement

may affect the results.

• The blood pressure varies constantly throughout the day. Measure-

ment should be made regularly at the same time each day.

• Do NOT be impressed by the results of one measurement. Keep a

record of blood pressure variations. Many readings tell a story.

• Emotional stress may tend to cause pressure to rise.

For proper measurement of blood pressure

• Take a deep breath five or six time and then relax before measuring

blood pressure. If you are tense when taking the measurement, you

will not get a valid reading.

• Blood pressure will be elevated when you are in a worrisome or irri-

tated state, suffering from lack of sleep or constipation, or after exer-

cise or a meal.

• Putting on the cuff is one of the most important tasks for ensuring

proper measurement of blood pressure. Wind the cuff around the

wrist and tighten it so that one finger may be inserted between the

cuff and arm.

• Do NOT measure blood pressure after bathing or drinking.

• When you feel like relieving yourself, you should do so before mea-

suring blood pressure.

• Measure blood pressure where the room temperature is about 20˚C.

Do NOT measure blood pressure when it is too cold (below 10˚C) or

too hot (above 40˚C) in the room.

CLEANING METHOD OF CUFF

GENERAL REMARKS

English

- Eng 3 -

• Do NOT measure blood pressure immediately after drinking coffee or

tea or smoking.

• Measure blood pressure with a relaxed and quiet posture. Keep the

center of the cuff at the level of your heart, and do NOT move your

arm or talk during measurement.

Precautions for use

• If you suffer from heart disease, high blood pressure or other circula-

tory disease, please consult your doctor first.

• If you feel abnormal pressure of the cuff during use or any other

irregularity, reduce the pressure by immediately switching off the

power or removing the batteries and consult the sales outlet where

purchased.

• If you think the measured value is abnormal or if measuring makes

you feel unwell, discontinue use and consult your doctor.

• Measurement of blood pressure may not be possible for someone

with a weak pulse or arrhythmia.

• Congestion, swelling, etc. may occur in some people.

• If blood pressure is measured repeatedly, an accurate result will not

be achieved. An interval of about 10 minutes should be allowed.

• The memory is erased if the batteries are removed for replacement,

etc. and a record should be kept of any necessary data.

Precautions for maintenance

• Do NOT store the blood pressure monitor where it will be exposed to

direct sunlight, high temperature (over 60˚C), low temperature (be-

low -20˚C), high relative humidity (over 95%) or in a dusty place.

• Do NOT expose the blood pressure monitor to under force or vibra-

tion, or drop it.

• Remove the battery/batteries when not in use for a long period.

• Do NOT disassemble the apparatus.

• Do NOT bend the cuff or air hose unnecessarily.

• NEVER wipe the blood pressure monitor with thinner or benzene, as

they may damage it.

• When the monitor is very dirty, wipe it clean with a cloth moistened

with Sterilizing alcohol or a neutral detergent, and then wipe it with a

dry cloth. Do NOT use thinner or benzene.

Nature and frequency of maintenance:

This products is designed for use over an extended period of time; how-

ever, it is generally recommended that it be inspected every two years

to ensure proper function and performance.

• Do NOT keep on measuring so many times, as your arm will have

built up congestion of blood, and you will not get a valid reading.

PRECAUTION FOR USE AND MAINTENANCE

- Eng 4 -

Protect the nature environment:

Please help protect natural environment by respecting national and/or

local recycling regulations when disposing of the batteries and the prod-

ucts at the end of their useful lives.

Reference European standard:

This products complies with EC instructions 93/42/EEC (Medical De-

vice Directive) and with the following standards: EN 1060-1 : 1995

“Noninvasive Sphygmomanometers, Part 1 General Requirements” and

EN 1060-3 : 1997 “Noninvasive Sphygmomanometers, Part 3 Supple-

mentary Requirements for Electromechanical Blood-Pressure Measur-

ing Systems”.

Manufacturer:

Name: Premier Precision Ltd.

Address: Block E, G-H, 6th floor,

Phase 2, Yip Fat Factory Building,

73-75 Hoi Yuen Road,

Kwun Tong, Kowloon, Hong Kong

European Representative:

Name: WvW elektronische Geräte Vertrieb GmbH.

Address: Robert-Koch-Straße 20,

D-80538 München,

GERMANY

MEASUREMENTS

POWER

START

MEMORY

SELECT

SYSTOLIC

mmHg

CH-611C

DIASTOLIC

mmHg

PULSE / min

Insert the Hose plug from the wrist cuff into the hose socket at the

mainframe until it is tightly connected.

1. Turn power ON

POWER

START

MEMORY

SELECT

SYSTILIC

mmHg

DIASTILIC

mmHg

PULSE/ min

CH-611C

Press the “Power switch” for power ON.

English

- Eng 5 -

All display marks appear for approx. 1 sec-

ond and buzzer beeps.

After all display marks are disappeared, de-

flation mark “▼” appears for approx. 1 sec-

ond (three short beeps notify you of ready

for measurement) then the last pressure set-

ting value appears for approx. 3 seconds.

Then the “

”appears at the display.

Ready for measurement

2. Attaching of wrist cuff

•Open the wrist cuff as the figure.

•Turn left hand palm upwards and wrap the cuff around the wrist in

the left-figure way that air hose is facing the palm of the hand.

•Wrap the wrist cuff on bare skin.

- Eng 6 -

•Place the wrist cuff at the 1cm from the wrist edge. At this time, the

air hose should be laid across the palm of the hand extending to-

ward the middle finger.

•Wrap the cuff around your wrist securely so that there is no space

between the wrist and the cuff.

•Place your elbow on table so that the cuff is at the level as your

heart. Relax your entire body, especially from elbow to your finger.

3. Select the value for pressure for measurement

There are 4 settings; 160, 200, 240 and 280mmHg.

After press on the “Pressure Setting Switch”, the set pressure value

will be displayed at the lower side of the display.

POWER

START

MEMORY

SELECT

SYSTILIC

mmHg

DIASTILIC

mmHg

PULSE/ min

CH-611C

Press the “Pressure Setting Switch”and

set the value to a value approximately

40mmHg above your normal systolic blood

pressure.

1cm

English

- Eng 7 -

4. To start the measurement

POWER

START

MEMORY

SELECT

SYSTILIC

mmHg

DIASTILIC

mmHg

PULSE / min

CH-611C

Press the “Start Switch”.

The wrist cuff pressurizes when the “Start

Switch”is pressed.

When the pressurization is reached to the

set value, air inflation is stopped automati-

cally.

When pressurization is completed, the au-

tomatic exhaust mechanism will gradually

reduce wrist cuff pressure, and the mark

“Q”appears indicating that measurement

is in progress.

When a pulse is detected, the pressure

value moves to the lower side of the dis-

play. At this time the mark “Q”flashes and

buzzer sounds.

When the diastolic pressure value is de-

tected, the measurement is completed and

buzzer sounds.

Systolic pressure is displayed on the up-

per and diastolic pressure on the lower side

of the display.

2 to 3 seconds after completion of mea-

surements, the mark “▼”appears and air

will deflate immediately.

2 or 3 seconds later, pressure value and

pulse appear alternately on the display.

5. Turn power off

Press the “Power Switch”to turn OFF.

POWER

START

MEMORY

SELECT

SYSTILIC

mmHg

DIASTILIC

mmHg

PULSE / min

CH-611C

6. Subsequent measurements

When a measurement need to be made

again, just press the “Start Switch”again.

- Eng 8 -

7. Change of the pressure-setting value

When the pressure setting is needed to be

changed, press the “Pressure Setting

Switch”and select optimum value.

POWER

START

MEMORY

SELECT

SYSTILIC

mmHg

DIASTILIC

mmHg

PULSE/ min

CH-611C

POWER

START

MEMORY

SELECT

SYSTILIC

mmHg

DIASTILIC

mmHg

PULSE/min

CH-611C

Flushing

8. Memory recall

This blood pressure monitor has a func-

tion which is able to display last measured

value.

•Press the “Memory Recall Switch”to re-

call the last measured blood pressure.

The last measured systolic and diastolic

blood pressure are displayed (Value of

the pulse is not memorized nor dis-

played).

•By a first depressing of “Memory Recall

Switch”, averaged blood pressure is dis-

played and “”mark flashes to notify

that the displayed value is averaged value.

Flushing

•By a second depressing of “Memory

Recall Switch”, the value for latest (last

measured value) blood pressure is

displayed. “”mark flushes to notify

that the value is the last measured

(newest one) value.

Flushing

•By a third depressing of “Memory Re-

call Switch”, the value for next later

blood pressure is displayed. “”mark

flushes to notify that the value is the next

later one.

•As per the same above-mentioned

method, you may recall 7 last measured

values by depressing of “Memory Re-

call Switch”.

Flushing

—Memory function works on for approximately 3 seconds or until

another switches are pressed. (Even if the last measured value is

displayed, you are able to start the measurements by pressing of

“Start Switch”or you are able to change the pressure-setting value

by pressing of “Pressure Setting Switch”or you are able to turn OFF

by depressing of “Power Switch”)

—Memory recall function does not work during automatic inflation

and blood pressure measurement are being made.

English

- Eng 9 -

—New blood pressure value is stored in memory at pressing “Power

Switch”for turn OFF or at pressing “Start Switch”for new measure-

ment.

9. Automatic power off function

If this unit is left on after measurement, an Automatic Power-OFF Func-

tion turns the power OFF after approximately 3 minutes. To continue

measurement press the power switch to turn the unit ON.

10. Battery replacement

If the batteries become weak, the “”mark will appear in the display,

indicating that batteries should be replaced with new ones.

Remove the battery cover at

mainframe and replace the new

four pieces of batteries.

Type “AA”(R6P, LR6) battery or

equivalent is suitable for this

blood pressure monitor.

- Eng 10 -

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Citizen Blutdruckmessgerät Handbücher

Citizen

Citizen REF CH-650 Bedienungsanleitung

Citizen

Citizen REF CH-453 Bedienungsanleitung

Citizen

Citizen REF CH-657 Bedienungsanleitung

Citizen

Citizen Micro HumanTech CH-4532 Bedienungsanleitung

Citizen

Citizen CH-618 Bedienungsanleitung

Citizen

Citizen CH-463E Bedienungsanleitung

Citizen

Citizen CH-656C Bedienungsanleitung

Citizen

Citizen REF CH-657 Bedienungsanleitung

Citizen

Citizen CH-657 Bedienungsanleitung

Citizen

Citizen REF CH-308B Bedienungsanleitung

Citizen

Citizen CH-461C Bedienungsanleitung

Citizen

Citizen CH-302B Bedienungsanleitung

Citizen

Citizen REF CH-452 Bedienungsanleitung

Citizen

Citizen CH-650 Bedienungsanleitung

Citizen

Citizen CH-432BS Bedienungsanleitung

Citizen

Citizen CH-432B Bedienungsanleitung

Citizen

Citizen CH-608 Bedienungsanleitung

Citizen

Citizen REF CH-452 Bedienungsanleitung

Citizen

Citizen CH-650 Bedienungsanleitung

Citizen

Citizen CH-485E Bedienungsanleitung

Citizen

Citizen CHU304 Bedienungsanleitung

Citizen

Citizen REF CH-491E Bedienungsanleitung

Citizen

Citizen CH-432B Bedienungsanleitung

Citizen

Citizen REF CH-456 Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Microlife

Microlife WatchBP Office Targe Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

Microlife

Microlife WatchBP office Bedienungsanleitung

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung