Clarke CBWS Bedienungsanleitung

OPERATION & MAINTENANCE

INSTRUCTIONS

LS1213

BICYCLE REPAIR STAND

MODEL NO: CBWS

PART NO: 7610197

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE product.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

SPECIFICATION

Dimensions 430 x 620 x 1060 mm

Weight 8.16 kg

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY

1. Place the four legs onto the base

plate as shown.

• On one end of the leg there

are 2 holes, this end should go

towards the centre of the base

plate

• On the other end of the leg

make sure that the hole is

pointing towards the floor.

2. Place the lower column onto the

legs and secure using the four

long bolts and spring washers

provided.

4. Slip the tool tray on to the upper

column as shown.

5. Place the spring washer and

washer onto the long bolt.

6. Pass the bolt through one of the

holes in the lower column as

shown.

• The holes provide three

different working heights.

7. Secure using the wing nut.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

8. Slide the upper column into the

lower column until it is resting on

the bolt inserted previously.

9. Tighten the adjustable knob

clockwise until hand tight.

10. Slide the bike frame holder

assembly onto the square tube

located on the upper column.

11. Fasten with small hex bolt

provided.

• You have three locations to

choose from depending on the

size of the bicycle.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

USING THE STAND

1. Place the lowest point of the

bicycle frame onto the stand.

2. Pass the T-bar through the bicycle

frame as shown and secure with

the washer and hand wheel.

NOTE: The gear assembly is not

shown for clarity.

3. Clamp the sloping crossbar to the

stand as shown.

4. Place the front arms either side of

the front wheel.

5. Tighten the hand wheel to hold

them in place.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ACCESSORIES

BIKE TRAINER - CCTS BIKE TRAINER - CCTI

•Magnetic Resistance

•Folds Flat For Easy Storage

•Part No. 4510001

•7 Level Magnetic Resistance

•Folds Flat For Easy Storage

•Contains A Front Wheel Base For Extra

Stability

•Part No. 4510005

BIKE TRAINER - CCTQR SPIRAL BIKE LOCK - CHT727

•7 Level Magnetic Resistance

•Quick Release

•Folds Flat For Easy Storage

•Part No. 4510003

• PVC Coated Steel Cable

• Quick Release Bracket

•Lightweight

•Part No. 1081727

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

Inhaltsverzeichnis

Andere Clarke Fahrradzubehör Handbücher

Clarke

Clarke CIB755 Bedienungsanleitung

Beliebte Fahrradzubehör Handbücher anderer Marken

Sigma

Sigma BC 16.16 Bedienungsanleitung

Playcore

Playcore Dero Setbacks Bedienungsanleitung

VDO Cyclecomputing

VDO Cyclecomputing x3dw Bedienungsanleitung

Cateye

Cateye RAPID X2 Bedienungsanleitung

buratti meccanica

buratti meccanica Clorofilla Trail Bedienungsanleitung

Shimano

Shimano SG-8R20 Betriebsanleitung

BOB

BOB YAK Bedienungsanleitung

APLIC

APLIC 303303/20190717TW012 Bedienungsanleitung

SRAM

SRAM AXS BlipBox Bedienungsanleitung

Garmin

Garmin EDGE 500 Bedienungsanleitung

Shimano

Shimano FD-RX810 Bedienungsanleitung

Cateye

Cateye V2C - Gebrauchsanweisung

KMART

KMART 43115907 Bedienungsanleitung

SIGMA SPORT

SIGMA SPORT Buster 2000 Bedienungsanleitung

NVO Components

NVO Components STEM Bedienungsanleitung

DAXYS

DAXYS BP188 Bedienungsanleitung

XLC

XLC BV-W17 Bedienungsanleitung

Deda Elementi

Deda Elementi SUPERBOX Bedienungsanleitung