Clarke CFI 1800 Bedienungsanleitung

OPERATION & MAINTENANCE

INSTRUCTIONS

GC0715

INFRARED WALL HEATERS

MODEL NO: CFI 1800/1800L

PART NO: 6939000 & 6939002

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE Infrared Wall Heater.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the

obligation to deal with the WEEE in accordance with the WEEE

regulations in relation to the treatment, recycling & recovery and

environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general

household waste. It must be disposed of according to the laws governing

Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal

facility.

If disposing of this product or any damaged components, do not dispose of

with general waste. This product contains valuable raw materials. Metal

products should be taken to your local civic amenity site for recycling of metal

products. Gas filled heater tubes should be disposed of appropriately.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY PRECAUTIONS

GENERAL

1. Always read and ensure you fully understand the following precautions

and the hazards associated with this type of heater. Do not allow anyone

who has not read these instructions to operate this heater. Please keep

these instructions in a safe place for future reference.

2. Always check for damage before using the heater. Any damage should

be properly repaired or the part replaced. If in doubt, DO NOT use the

heater and consult your local Clarke dealer.

3. Never carry out any modifications to this product. If experiencing difficulty

of any kind consult your local dealer.

4. Use the heater in accordance with any applicable fire regulations.

OPERATING ENVIRONMENT

1. Never use the heater where petrol, paint thinners or other highly flammable

vapour or where high levels of airborne dust may be present.

2. Never locate the heater facing combustible materials such as screens,

workshop furniture etc.

3. Disconnect the heater from the power supply when not in use.

4. Never place anything on top of the heater so as to impede free air flow.

5. The heater is resistant to splashing but should be sheltered from direct

rainfall, as should the power cable, plug and supply outlet socket. An

overhanging roof or other shelter should be used to protect from rain.

6. Never locate the heater near combustible materials such as curtains,

furniture etc. Allow at least 1 metre distance between heater and any

combustible surfaces.

7. Allow a distance of at least 1 metre from an adjacent walls and avoid

installing the heater close to power socket outlets.

8. Do not allow the heating element to become covered with dust which

could become a fire hazard. If used in a dusty workplace it should be

cleaned as described under Cleaning and Maintenance.

9. Never touch the heater element for at least 15 minutes after switching off.

10. Do not leave the heater unattended.

11. Do not use this heater with a programmable timer used to switch it on

automatically.

12. Never arrange any duct work to the front of the heater.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

PERSONAL SAFETY

1. When the heater is to be operated in the presence of other people the

user is responsible for informing those present of the safety precautions and

of the hazards involved.

2. The heater is not to be used by children or persons with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge.

3. Always ensure that people and animals are well away from the front of the

heater when in operation.

4. This heater will be hot when in operation and should not be touched until it

has fully cooled down after switching off.

5. Never leave the heater plugged in without adult supervision if children or

animals are likely to be present.

6. Do not use this heater in small rooms when occupied by persons unable to

leave the room on their own unless constant supervision is provided.

ELECTRICAL SAFETY

1. Make sure that the voltage on the rating label is the same voltage as the

power supply. If in doubt consult a qualified electrician.

2. Never modify the plug in any way. Do not use adaptor plugs with earthed

appliances. Correct plugs and outlets will reduce the risk of electric shock.

3. Do not abuse the electrical cable. Keep the cable away from sources of

heat, sharp edges or moving parts. Damaged or tangled cables increase

the risk of electric shock.

4. Regularly inspect the power cable for damage. DO NOT use if damaged &

keep it away from the source of heat. If damaged, it must be replaced.

DAMAGE & REPAIRS

1. If necessary, have your heater repaired by a qualified person using

identical replacement parts to maintain the safety of the heater.

SAFETY SYMBOLS

The above symbols are shown on the heater.

Hot surface, do not

touch.

Do not cover.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ELECTRICAL CONNECTIONS

Before switching the product on, make sure that the voltage of your electricity supply is

the same as that indicated on the rating plate. This product is designed to operate on

230VAC 50Hz. Connecting it to any other power source may cause damage.

This product may be fitted with a non-rewireable plug. If it is necessary to change the

fuse in the plug, the fuse cover must be refitted. If the fuse cover becomes lost or

damaged, the plug must not be used until a suitable replacement is obtained.

If the plug has to be changed because it is not suitable for your socket, or due to

damage, it should be cut off and a replacement fitted, following the wiring instructions

shown below. The old plug must be disposed of safely, as insertion into a mains socket

could cause an electrical hazard.

If the colours of the wires in the power cable of this product do not correspond with the

markings on the terminals of your plug, proceed as follows.

• The wire which is coloured Blue must be connected to the terminal which is

marked Nor coloured Black.

• The wire which is coloured Brown must be connected to the terminal which

is marked Lor coloured Red.

• The wire which is coloured Yellow and Green must be connected to the

terminal which is marked E or or coloured Green.

We strongly recommend that this machine is connected to the mains supply

via a Residual Current Device (RCD)

If in any doubt, consult a qualified electrician. DO NOT attempt any repairs yourself.

WARNING! READ THESE ELECTRICAL SAFETY INSTRUCTIONS

THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE

MAINS SUPPLY.

WARNING! THE WIRES IN THE POWER CABLE OF THIS PRODUCT

ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:

BLUE = NEUTRAL BROWN = LIVE YELLOW AND GREEN = EARTH

Plug must be BS1363/A approved.

Always fit a 13 Amp fuse.

Ensure that the outer sheath of the cable is firmly held by the clamp

Neutral

(Blue)

Live

(Brown)

Earth

(Green and Yellow)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

PREPARATION

UNPACKING

Remove heater from the carton and check for any damage sustained in

transit. Notify your Clarke dealer immediately of any defects.

MOUNTING THE HEATER

The heater is resistant to splashing but should be sheltered from direct rainfall,

as should the power cable, plug and supply outlet socket. If used outdoors, an

awning, overhanging roof or other shelter should be used to protect from rain

The heater must be mounted on a suitable wall at a height not less than 1.8m

above the floor.

It is important that the heater is positioned with at least 1 m clearance at the

front between the heater and any obstruction including walls or other

combustible surfaces. Always position the heater facing the centre of the

space to be heated, not pointing directly at any nearby surfaces. Never place

any objects on, or against the heater.

Any equipment or furniture should be a safe distance away, as they could be

adversely affected by heat. Take care that the heat is not directed at curtains

or other fabrics.

1. Drill four holes in the wall to

accept the plastic wall-plugs

supplied, at the distances apart

shown in the diagram. Other wall

plugs may be required,

dependant upon the construction

of the wall.

2. Screw the mounting bracket to

the wall.

3. Fit the heater onto the wall

bracket and secure in position

with the screw knob.

4. Set the downwards angle of the

heater by loosening the mounting

bracket with a large x-head

screwdriver and adjusting the

angle before re-tightening

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

OPERATION

1. Connect the mains cable to a suitable power socket.

2. Pull the string to repeatedly to

cycle through the following

settings:

CFI1800

•O= Off

•I= Heater elements on

CFI1800L

•O= Off

•I= Lamps only

•II = Heater elements on/lamps off

•III = Heating elements and lamps both on

CLEANING AND MAINTENANCE

PERIODICALLY

1. If there is any serious build up of dirt, wipe thoroughly with a damp cloth.

Take care that no moisture enters the heater.

2. Inspect the power cable for damage. Undue heat will cause the cable to

stiffen and crack, in which case it should be replaced.

3. Ensure heating elements are free of dust (use compressed air to clean if

possible. (Always wear a dust mask if performing this operation).

4. Refer to your Clarke dealer if the heater element or LED lamp need

replacing.

WARNING: BEFORE CARRYING OUT ANY MAINTENANCE, ENSURE THE

HEATER IS SWITCHED OFF, DISCONNECTED FROM THE MAINS SUPPLY,

AND HAS BEEN GIVEN ADEQUATE TIME TO COOL DOWN.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

FAULT FINDING

TECHNICAL SPECIFICATION

SYMPTOM PROBLEM SOLUTION

Heater does not

operate, although

plugged in and

switched on.

Plug is loose/ bad

connection.

Remove the plug & check

the connection of the plug

and socket.

Fuse blown. Replace if necessary and

investigate the cause. If

fuse blow repeatedly,

consult your Clarke dealer.

No power at socket

outlet.

Insert plug into a suitable

socket.

Input voltage incorrect. Ensure power supply

matches the rating on the

label.

Lights not working Defective LED array. Consult your Clarke dealer

for replacement.

Defective switch Consult your Clarke dealer

for replacement.

Model CFI1800 CFI1800L

Dimensions (L x W x H) 220 x 652 x 228 mm 220 x 890 x 228 mm

Weight 2.35 kg 3.3 kg

Electrical Supply 230 V / 50hz

Power Cable length 1850 mm

Protection Degree IP24 (water splash)

Operating Temperature -20 to 30

Tilt Range Level to -14 degrees

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

PARTS DIAGRAM

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

PARTS LIST

When requesting replacement parts, please quote: WH-CFI1800(L)-01

onwards.

# = items related to the light assembly on the CFI1800L only.

ID DESCRIPTION ID DESCRIPTION

1 LED Surround Ring # 29 Connector Cap

2 Self-tapping Screw 30 Control Box Cover

3 LED Lens # 31 Cable Clamp

4 Side Cover 32 Screw

5STScrew# 33StarWasher

6 LED Panel # 34 Screw

7 LED Sealing Ring # 35 Spring Washer

8 LED Bulb Assembly # 36 Nut

9 LED Holding Bracket # 37 Self-tapping Screw

10 LED Housing # 38 Cable Clip

11 Self-tapping Screw # 39 Seal

12 Connecting Disc # 40 Switch Bracket

13 Stainless Steel Ball # 41 Switch

14 Spring # 42 Control Box

15 LED Module Side Panel 43 Cable Bush

16 Heater Side Panel 44 Internal Wiring Loom

17 Heater Panel 45 Power Cable & Plug

18 Reflector Bracket 46 Plastic Plug

19 Heating Tube Element (lamp) 47 Self-tapping Screw

20 Reflector 48 Draw Cord

21 Mesh Guard 49 Display Disc

22 Heater Housing 50 Star Washer

23 Hinge Sealing Ring 51 Wall Bracket

24 Hinge Seal 52 Screw Knob

25 Nut 53 Connecting Plate

26 Hinge 54 Fixing Loop

27 Screw 55 Self-tapping Screw

28 PVC Sticker

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clarke Heizung Handbücher

Clarke

Clarke XR75 Installations- und Betriebshandbuch

Clarke

Clarke OFR 9 Bedienungsanleitung

Clarke

Clarke Devil 6003 Handbuch

Clarke

Clarke IQ2000 Bedienungsanleitung

Clarke

Clarke Devil 6003 Bedienungsanleitung

Clarke

Clarke CONTRACTOR DEVIL 351C Installations- und Betriebshandbuch

Clarke

Clarke DEVIL 2000PTC Bedienungsanleitung

Clarke

Clarke DEVIL 7003 Bedienungsanleitung

Clarke

Clarke DEVIL 5000PTC Bedienungsanleitung

Clarke

Clarke XR60DV Bedienungsanleitung

Clarke

Clarke DEVIL 2800PTC Bedienungsanleitung

Clarke

Clarke 6933980 Bedienungsanleitung

Clarke

Clarke DEVIL 4035 Installations- und Betriebshandbuch

Clarke

Clarke Devil IRD20B Bedienungsanleitung

Clarke

Clarke DEVIL 371PC Installations- und Betriebshandbuch

Clarke

Clarke DEVIL 350B 230V Installations- und Betriebshandbuch

Clarke

Clarke DEVIL 370PC Installations- und Betriebshandbuch

Clarke

Clarke OFR13/250 Bedienungsanleitung

Clarke

Clarke OFR7 Bedienungsanleitung

Clarke

Clarke DEVIL 350 230V Installations- und Betriebshandbuch

Clarke

Clarke DEVIL 2800PTC-B Bedienungsanleitung

Clarke

Clarke Devil 6002 Handbuch

Clarke

Clarke DEVIL 2000PTC-B Bedienungsanleitung

Clarke

Clarke 6933985 Bedienungsanleitung

Beliebte Heizung Handbücher anderer Marken

oventrop

oventrop Regucor Series Bedienungsanleitung

Blaze King

Blaze King CLARITY CL2118.IPI.1 Bedienungsanleitung

ELMEKO

ELMEKO ML 150 Bedienungsanleitung

BN Thermic

BN Thermic 830T Bedienungsanleitung

KING

KING K Series Leitfaden

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Kurzanleitung

Well Straler

Well Straler RC-16B Bedienungsanleitung

EUROM

EUROM 333299 Bedienungsanleitung

Heylo

Heylo K 170 Bedienungsanleitung

Eterna

Eterna TR70W Bedienungsanleitung

Empire Heating Systems

Empire Heating Systems WCC65 Bedienungsanleitung

Wetekom

Wetekom 92 86 43 Bedienungsanleitung

Desa

Desa SPC170-F Bedienungsanleitung

Watlow

Watlow Watrod Electric Tubular Heaters Bedienungsanleitung

Haverland

Haverland ECO-DRY GPS Series Stücklistenhandbuch

Stelpro

Stelpro ASILVC2060 Series Bedienungsanleitung

iLO

iLO IHP2424 Betriebsanleitung

SUNWIND

SUNWIND ZSG101 Bedienungsanleitung