Clarke CMC36B Bedienungsanleitung

ASSEMBLY INSTRUCTIONS

GC0422

ORIGINAL INSTRUCTIONS

CAR CREEPERS

MODEL NO: CMC36B & CMC40B

PART NO: 7630207 & 7630208

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE Car Creeper. Before attempting to use

this product, please read this manual thoroughly and follow the instructions

carefully. In doing so you will ensure the safety of yourself and that of others

around you, and you can look forward to your purchase giving you long and

satisfactory service.

SPECIFICATIONS

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission. This guarantee does not effect your

statutory rights.

PRODUCT INVENTORY

• 1 Car creeper body

•6Castors

• 12 M6 x 23mm Coachbolts

• 12 M6 Nylock nuts

• 12 Washers 16mm o/d

• 12 Spacers

• Plastic nut key

If any parts are missing or damaged contact your CLARKE dealer immediately.

CMC36B CMC40B

Dimensions (L x W x H) 910 x 410 x 100mm 1010 x 475 x 125mm

Underside clearance min 29mm/max 65mm min 38mm/max 87mm

Maximum load 113kg (250lb) 113kg (250lb)

Weight 3.25kg 5kg

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY PRECAUTIONS

1. NEVER allow the creeper to be used as a plaything such as a skateboard.

Keep children away at all times...this is NOT a toy.

2. ALWAYS use on a hard level surface, not in the vicinity of drains, holes,

curbs, cracks etc., as this could cause serious damage to the castors.

3. ALWAYS check your car creeper regularly for damage before use and if

any is apparent, have it repaired before use. Remember, broken, worn or

missing parts could result in injury.

4. DO NOT modify this product in any way. Unauthorized modifications may

impair the function and/or safety and could effect the life of the product.

5. DO NOT exceed the maximum rated load capacity.

6. DO NOT stand on the car creeper or use as a stepping device.

7. ALWAYS sit down slowly & carefully on the creeper to avoid shock loading.

8. DO NOT place under a car tyre to move or reposition a vehicle.

9. ALWAYS make sure the vehicle being worked on is properly supported with

axle stands and the wheels are chocked before going under the vehicle.

10. DO NOT drop the creeper onto the ground.

11. When not in use, it should be stored carefully and not left lying around for

others to trip over.

ASSEMBLY

1. Fit each castor to the creeper body

using the fastenings provided.

2. Insert the coachbolts through the

castors from below, inserting the

spacers into each of the mounting

holes before adding the washers and

locknuts from above.

3. Use the nut key supplied, or a suitable

socket wrench to tighten the nuts.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clarke Werkzeuge Handbücher

Clarke

Clarke CHT204 Bedienungsanleitung

Clarke

Clarke CAT125 Installations- und Betriebshandbuch

Clarke

Clarke SBR305 Bedienungsanleitung

Clarke

Clarke Strong-Arm CLL500 Handbuch

Clarke

Clarke CBS4 Bedienungsanleitung

Clarke

Clarke CEA150 Installations- und Betriebshandbuch

Clarke

Clarke CHT733 Bedienungsanleitung

Clarke

Clarke CHT204 Bedienungsanleitung

Clarke

Clarke CAR15PC Bedienungsanleitung

Clarke

Clarke CHT878 Bedienungsanleitung

Clarke

Clarke CAT33B Installations- und Betriebshandbuch

Clarke

Clarke CHT637 Installations- und Betriebshandbuch

Clarke

Clarke Air CAT62 Installations- und Betriebshandbuch

Clarke

Clarke SBR610 Bedienungsanleitung

Clarke

Clarke CHT697 Installationsanleitung

Clarke

Clarke CHT738 Bedienungsanleitung

Clarke

Clarke CMFT250 Bedienungsanleitung

Clarke

Clarke CAT151 Installations- und Betriebshandbuch

Clarke

Clarke METALWORKER CTR1 Bedienungsanleitung

Clarke

Clarke CAT66 Bedienungsanleitung

Clarke

Clarke CSB20B Bedienungsanleitung

Clarke

Clarke X-PRO CAT170 Installations- und Betriebshandbuch

Clarke

Clarke CONTRACTOR CSJ100 Bedienungsanleitung

Clarke

Clarke CHT 141 Bedienungsanleitung

Beliebte Werkzeuge Handbücher anderer Marken

Martor

Martor SECUNORM 175 Bedienungsanleitung

ERKCO

ERKCO 1000 Bedienungsanleitung

jbc

jbc N4473 Bedienungsanleitung

FEINMETALL

FEINMETALL FZWZ-SET-001 Bedienungsanleitung

Worx Professional

Worx Professional Sonicrafter WU676 Bedienungsanleitung

Gage Bilt

Gage Bilt GB713SH Bedienungsanleitung

Hilti

Hilti DX 9-ENP Bedienungsanleitung

norbar

norbar NORTRONIC 34399 Bedienungsanleitung

BGS technic

BGS technic 8578 Bedienungsanleitung

Makita

Makita DHR241 Bedienungsanleitung

Motor Guard

Motor Guard JMB-1250 Bedienungsanleitung

Power Adhesives

Power Adhesives 805-12 Bedienungsanleitung

Clemco

Clemco 24189 Bedienungsanleitung

VVG

VVG VNG 903 Series Bedienungsanleitung

Hilti

Hilti FX 3-A Bedienungsanleitung

Grizzly

Grizzly H6472 Bedienungsanleitung

axing

axing BWZ 5-02 Bedienungsanleitung

Dh-Robotics

Dh-Robotics RGI-100 Anleitung zur Verwendung