Clarke WS100 Bedienungsanleitung

OPERATION & MAINTENANCE

INSTRUCTIONS

LS0309

WIRELESS WEATHER STATION

MODEL NO: WS100

PART NO: 4501002

INTRODUCTION

Thank you for purchasing this CLARKE Wireless Weather Station.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you can look forward to your

purchase giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

IN THE BOX

1. 1 x Base station

2. 1 x Remote sensor with mounting bracket

3. 1 x Instruction manual

ENVIRONMENTAL PROTECTION

BATTERY DISPOSAL

Please ensure batteries are disposed of safely. Never dispose of batteries in

the fire or with household waste. Check with your local authority for disposal

regulations.

OVERVIEW

1Daylight Saving Time indicator 16 Outdoor humidity display

2Radio Controlled Time indicator 17 Outdoor temperature and humidity low

alarm and high alarm

3Time 18 Temperature display unit (C or F)

4Radio Controlled Time Icon 19 Outdoor temperature display

5Alarm ON indicator 20 General outdoor alarm icon

6Day of week/ time zone 21 Weather forecast icon

7Date 22 Weather tendency indicator

8Indoor humidity display 23 Pressure with 24 hour history graph

9Indoor temperature and Humidity Low

alarm and high alarm

24 Pressure high alarm

10 Indoor temperature display 25 Pressure low alarm

11 Temperature display units 26 Air pressure history graph (past 24 hours)

12 Indoor temperature and humidity

alarm on indicator

27 Barometric air pressure

13 Remote sensor transmit signal indicator 28 Pressure display unit (inHg or hPa)

14 MIN/MAX information 29 Pressure alarm on indicator

15 Dew point temperature display 30 Low Battery Icon

SET UP

NOTE: Use good quality alkaline batteries and avoid rechargeable

batteries.

1. Have the indoor weather station and remote temperature sensor close

together during setup.

2. Place the batteries into the remote sensor first then into the weather

station. See below.

INSTALLING THE BATTERIES

REMOTE SENSOR (FIG 1)

Battery compartment retaining screw

Fig 1

Unscrew and remove the battery

compartment retaining screw.

2. Remove the battery

compartment cover.

3. Insert two alkaline AAA batteries

into the remote sensor.

NOTE: Make sure that you follow

the polarity diagram inside

the battery compartment.

4. Replace the battery compartment cover.

INDOOR BASE STATION (FIG 2)

Fig 2

Remove the battery cover.

2. Observing the correct polarity,

install three alkaline AA batteries.

3. Replace the battery cover.

4. Do not press any buttons for at

least ten minutes.This will allow

time for the weather station to

start receiving information from

the sensor,

• If successful the indoor weather station will show the outdoor

temperature and humidity.

• If the indoor weather station does not display these values after 1

minute, the signal search will try again every two hours until a signal is

found.

• Once the remote sensor temperature and humidity values are displayed

for 10 minutes you can place the sensor outdoors.

RADIO TIME SIGNAL

After the initial setup period, the weather station will start to search for a radio

time signal.

The time and date signal is sent by a highly accurate government-operated

atomic clock. The weather station will continually scan for the radio controlled

time signal each day.

• If reception is unsuccessful, then the radio time signal icon will not

appear and the manually entered time will be displayed. See page 9 for

instructions on how to enter the time manually.

• If reception has been successful, the radio time signal icon will be

shown and the received time and date will overwrite any manually set

time and date.

MOUNTING

BASE STATION

• There is a folding stand at the

rear of the base station, which

allows the unit to be stood onto

any flat surface.

• The base station may also be

wall mounted using the

hanging hole on the rear of the

unit.

NOTE: It is important to check that

the radio signal can be

received at the chosen location before permanently mounting

either of the units.

REMOTE SENSOR

NOTE: To obtain acurate temperature readings, do not mount the

remote sensor in direct sunlight. We recommend that you mount

the sensor on an outside north-facing wall.

NOTE: Obstructions such as walls, concrete, and large metal objects will

reduce the transmitting range.

1. Use 3 screws to fix the wall bracket

to the wall.

2. Clip the sensor into the wall

bracket as shown.

3. The remote sensor will transmit the

outdoor temperature and

humidity back to the weather

station.

USING THE WEATHER STATION

WEATHER FORECASTING

Sunny Cloudy

Partly Cloudy Rain

The four weather icons Sunny, Partly Cloudy, Cloudy and Rainy represent the

weather types.

NOTE: Weather forecasting is based upon the change of air

pressure.The pressure threshold can be adjusted from level 2-4

(default level 2). See “General Settings” on page 9. Areas that

experience frequent changes in air pressure require a higher

setting.

WEATHER TENDENCY ARROWS

The weather tendency arrows are located between the weather icons and

provide a forecast of the weather you can expect.

• Arrows pointing to the right - mean that the air pressure is increasing

and the weather is expected to improve.

• Arrows pointing to the left - mean that the air pressure is decreasing

and the weather is expected to deteriorate.

EXAMPLES OF CHANGING WEATHER ICONS:

This is based upon the current pressure and the pressure change over the last

six hours.

• If the weather is changing, the arrows will flash for three hours

indicating changing weather.

• If the weather conditions become stable, then the arrows will not

flash.

STORM WARNING

When there is a fall in pressure (above the threshold) over a period of 3 hours,

the storm warning feature will activate.

• The “cloud with rain” icon and tendency arrows will flash for 3 hours

indicating the storm warning feature has been activated.

NOTE: The storm threshold can be adjusted by the user from level 3-9

(default level 4). See page 9.

SETTINGS

• Display Settings

• General Settings

• Alarm Mode

•Min/MaxMode

You can return to normal mode at any time by either pressing the SNOOZE/

LIGHT button located on top of the unit, or waiting for 10-seconds without

pressing any buttons.

DISPLAY SETTINGS

The display settings mode allows you to select what is displayed either outdoor

temperature or dew point and absolute or relative pressure.

1. Press the SET button once.

• Outdoor Temperature / Dew point will start to flash.

2. Press the MIN/MAX button or + button to select between Outdoor

Temperature and Dew Point.

3. Press the SET button again to make the selection.

• Absolute pressure / Relative pressure will start to flash.

4. Press the MIN/MAX button or + button to select between Absolute Pressure

and Relative Pressure.

5. Press the SET button again to make the selection and return to normal

mode.

GENERAL SETTINGS

1. Press and hold the SET button for 3 seconds or until the base station beeps

to enter the “general settings” mode.

2. Press the SET key again to cycle through the following settings.

• Time Zone Setting: the default time zone setting value is -1 based on

Germany DCF time (GMT +1)

• 12/24 hour format

• Manual time setting (hours/minutes)

• Calendar setting (year /month /date)

• Temperature display unit (degrees Celsius or Fahrenheit)

• Air pressure display units in hPa (hectopascals) or inHg (inches of

mercury)

• Relative Pressure setting from 27.13inHg - 31.89inHg (default

29.92inHg)

• Pressure Threshold setting (default 2) - The lower level pressure

threshold setting, the higher sensitivity for weather forecasting

• Storm threshold setting (default 4)

3. Press the + button to increase or MIN/MAX button to decrease the value of

the setting.

4. Press the SNOOZE/LIGHT button on top of the weather station to return to

Normal Mode.

ALARM MODES

• High alarm mode means that if any of the current weather values

rise above those set then the alarm will sound.

• Low alarm mode means that if any of the current weather values fall

below those set then the alarm will sound.

SELECTING HIGH/LOW ALARM MODE

1. Press the ALM key once to select HIGH alarm mode or twice to select LOW

alarm mode

• Alarm values will be displayed for those already activated, all other

values will be shown as “—”.

SETTING THE ALARM

1. Press the SET key to select the following alarm options:

• Time alarm (hour/minute)

•Indoor humidity

• Indoor temperature

• Outdoor humidity

• Outdoor temperature / dew point

• Pressure

2. Press + key or MIN/MAX key change the alarm value.

• Hold the + key or MIN/MAX key for 3 second to change the number

in greater steps.

3. Press the ALARM key to turn the alarm on or off

4. When the alarm is enabled for that option, the speaker icon on the LCD will

be displayed next to that option.

5. Press the SET key to confirm the setting and continue to the next option.

6. Press the SNOOZE/LIGHT button on top of the weather station to return to

Normal Mode

THE ALARM

When an outdoor weather alarm has been triggered, it will flash on the LCD

display. The general outdoor alarm icon and high/low alarm icon will flash.

Inhaltsverzeichnis

Andere Clarke Wetterstation Handbücher

Clarke

Clarke WCP150 Installations- und Betriebshandbuch

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

La Crosse Technology

La Crosse Technology C86371 Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2210 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-811561 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung