Clarke MFL800R Bedienungsanleitung

INSTRUCTIONS FOR USE

GC07/23

MULTI-FUNCTION WORKLIGHT

MODEL NO: MFL800R

PART NO: 4003542

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE Worklight. Before attempting to use this

product, please read this manual thoroughly and follow the instructions

carefully. In doing so you will ensure the safety of yourself and that of others

around you, and you can look forward to your purchase giving you long and

satisfactory service.

TECHNICAL SPECIFICATIONS

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase. This guarantee is invalid if the product is found

to have been abused or tampered with in any way, or not used for its

intended purpose.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission. This guarantee does not effect your

statutory rights.

Model MFL800R

Operating voltages 3.7V (light), / 230V (charger)

LED Wattage consumption 9W(max)

LED replaceable No

Rechargable Lithium battery 3.7V / 4400mAh

LED Light source 4 x 1W SMD, 1 x 5W LED, 1 x 2W LED

Light output (luminous flux) max 800 Lm

Colour temperature (rendering) 6000 - 6800K

Ingress Protection (IP rating) IP20

Battery charging time 6 hours

Approximate Run Time 5 Hours

Efficiency 88 Lm/W

Operating temperatures 0 to +45oC

Dimension 55 x 255 x 42mm

Weight 330g

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY INSTRUCTIONS

1. ALWAYS check for damage before using the worklight. Inspect the power

cable and plug for damage. Any damage should be properly repaired or

the part replaced. Consult your local CLARKE dealer.

2. ALWAYS ensure that the voltage marked on the charger matches the

power supply to be used.

3. NEVER use this lamp in a bathroom or in the vicinity of a swimming pool.

4. NEVER cover the lamp.

5. NEVER pull the cable to remove the charger plug from the power supply.

6. DO NOT look directly into the worklight when it is switched on.

7. Keep the worklight out of the reach of children.

8. Charge the worklight in a dry indoor location. DO NOT immerse in water or

any other liquid.

9. ALWAYS fully charge before first use.

10. DO NOT turn on the light when charging.

11. DO NOT leave the worklight on charge for more than 24 hours.

12. DO NOT disassemble the worklight as there are no user changeable parts.

13. This worklight utilises a rechargeable Lithium-ion battery that can rupture,

ignite and cause serious injury if being used improperly.

14. DO NOT put batteries and the worklight in the fire or high temperature.

15. DO NOT puncture or damage the batteries.

16. DO NOT immerse or expose the worklight to water.

17. DO NOT dispose of the worklight in a fire or water.

THE FOLLOWING WARNING SYMBOLS ARE FOUND ON THE PRODUCT

Indoor use

Harmful to aquatic life

Pacemaker hazard (due to magnet)

Not suitable for use by children

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the

obligation to deal with the WEEE in accordance with the WEEE

regulations in relation to the treatment, recycling & recovery and

environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general

household waste but according to the laws governing Waste Electrical and

Electronic Equipment (WEEE) at a recognised disposal facility.

The light source contained in this worklight has a life expectancy of

approximately 50000 hours after which the worklight should be disposed of in

an environmentally responsible way.

The Lithium Ion battery falls under the Waste Batteries and Accumulators

Regulations 2009 and should be disposed of in a controlled manner.

BATTERY CHARGING

1. Connect the AC charging

adaptor to the charging jack on

the worklight.

2. Connect the other end of the

charger to the 230V mains power

supply and charge until fully

charged.

• The battery condition indicator

will illuminate when charging.

• The worklight should not be

used while using the charger.

3. The battery should be re-charged

at least every 3 months. Failure to

re-charge the battery will lead to

reduced performance of the

worklight and to premature battery failure.

4. If you plan to store the worklight (e.g. for emergencies), we recommend

that the battery is fully charged before doing so. This will ensure the longest

possible battery life.

5. NEVER abuse the charger cable or yank the cable to disconnect it. Keep

the cable away from sharp edges/hot surfaces.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

OPERATION

To switch on the different LEDs, press the ON/

OFF button in the following sequence.

1. The first press switches on the centre light.

2. The second press switches on the two

upper and two lower LEDs.

3. The third press switches on all LEDs.

4. The fourth press makes all lights brighter.

5. The fourth press switches off the main

lights and switches on the end LED (torch) light.

6. The fifth press switches the unit off.

NOTE: If set to 3 or 4 for longer than a few seconds, the next press

switches the unit off.

CAUTION: NEVER SHINE ANY LED LIGHT DIRECTLY INTO ANYONE’S EYES.

Attach the worklight to a suitable

support using the folding hook or

attach to a ferrous metal surface using

the magnetic retainer.

Angle the worklight to suit the task by

bending and/or twisting the top half of

the unit to shine in any direction.

To keep your worklight clean, wipe with

a damp cloth only, DO NOT use

detergents, chemicals or harmful

abrasives. Never immerse in water.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

COMPONENT PARTS

Item Description Item Description Item Description

1 Front Lens 10 Switch Support 19 Lithium Battery

2 Housing 11 Switch Cap 20 Ratchet

3 Reflector 12 Radiator 21 Back Pivot

4 LED Plate 13 Back Housing 22 Hook Support

5 Torch LED 14 Sticker 23 Back Housing

6 LED Lens 15 DC Hole Rubber 24 Hook

7 DC Socket Nut 16 Front Pivot 25 Screw

8 DC Socket 17 Front Housing 26 Magnet

9 PCBA 18 Fluorescent Ring 27 Magnet Support

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

DECLARATIONS OF CONFORMITY

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clarke Arbeitsleuchte Handbücher

Clarke

Clarke COB10T Betriebsanleitung

Clarke

Clarke SMD84T/110 Betriebsanleitung

Clarke

Clarke COB10C Betriebsanleitung

Clarke

Clarke SMD2700L Bedienungsanleitung

Clarke

Clarke LED1000R Bedienungsanleitung

Clarke

Clarke RWL36LI Bedienungsanleitung

Clarke

Clarke SMD84T Betriebsanleitung

Clarke

Clarke GWL700R Bedienungsanleitung

Clarke

Clarke CTL24/3 Bedienungsanleitung

Clarke

Clarke SMD4500 Bedienungsanleitung

Clarke

Clarke COB10CR Bedienungsanleitung

Clarke

Clarke COB10C/110 Betriebsanleitung

Clarke

Clarke PL5R Bedienungsanleitung

Clarke

Clarke HLC400 Betriebsanleitung

Clarke

Clarke UBL1600R Bedienungsanleitung

Clarke

Clarke CFL20Li Bedienungsanleitung

Clarke

Clarke HLC400T/110 Betriebsanleitung

Clarke

Clarke SMD42C Betriebsanleitung

Clarke

Clarke RWL30 Bedienungsanleitung

Clarke

Clarke HLC400T Betriebsanleitung

Clarke

Clarke SMD42T/110 Betriebsanleitung

Clarke

Clarke SMD42T Betriebsanleitung

Clarke

Clarke CL6FS Bedienungsanleitung

Clarke

Clarke LED700SR Bedienungsanleitung

Beliebte Arbeitsleuchte Handbücher anderer Marken

ANSMANN

ANSMANN POWERLIGHT 5.1 Bedienungsanleitung

RTRMAX

RTRMAX RTX1868 Bedienungsanleitung

FeinTech

FeinTech LAL00220 Bedienungsanleitung

Bunker Hill Security

Bunker Hill Security 64735 Bedienungsanleitung

Goobay

Goobay 30450 Bedienungsanleitung

REV Ritter

REV Ritter SPOT Bedienungsanleitung

Ignition

Ignition Stagepix Line 100 IP Bedienungsanleitung

SCANGRIP

SCANGRIP DUO CONNECT Bedienungsanleitung

Bosch

Bosch GLI 18 V Bedienungsanleitung

Bayco

Bayco SL-1514 Bedienungsanleitung

EUFAB

EUFAB SMD LED 8+1 Bedienungsanleitung

DeWalt

DeWalt DCL510 Bedienungsanleitung

MaxLite

MaxLite 73683 Bedienungsanleitung

Heitronic

Heitronic Trend 27867 Bedienungsanleitung

EINHELL

EINHELL TE-CL 18/2000 LiAC Bedienungsanleitung

IKEA

IKEA STRÖMLINJE Bedienungsanleitung

Regent

Regent CHSL300 Bedienungsanleitung

Monzana

Monzana Spodaj MZUL277 Bedienungsanleitung