Claypaky C61769 Bedienungsanleitung

INSTRUCTI N MANUAL

Congratulations on choosing a Claypaky product!

We thank you for your custom.

Please note that this product, as all the others in the

rich Claypaky range, has been designed and made with

total quality to ensure excellent performance and best

meet your expectations and requirements.

INDEX

ENGLISH

Page Contents

2 1. Safety information

3 2. Unpacking and preparation

4 3. Installation and start-up

4 3.1 Installing the fixture

4 3.2 Connecting to manis supply

5 3.3 Connecting the control signal line: DMX / Art-Net

5 3.4 Switching on the fixture and basic SetUp

7 4. Maintenance

7 4.1 Opening the covers

8 4.2 Periodical cleaning

9 4.3 Effects module removal

12 4.4 Cleaning of the filters

14 4.5 Rotating gobos

15 4.6 Battery removal

16 5. Specifications

PRELIMINARY

AXCOR PROFILE 400

AXCOR PROFILE 400 HC

C61769

C61768

AXCOR PROFILE 400 - 400 HC

SAFETY INF RMATI N

IMPORTANT: Claypaky recommends you carefully read and keep the safety information on this product, also

available in digital format at the following link:

www.claypaky.com

Ref: FIS00T - Safety Information Axcor 400 series

INF RMAZI NI DI SICUREZZA

IMPORTANTE: Claypaky raccomanda di leggere accuratamente e conservare le informazioni di sicurezza relative

a questo prodotto, sempre reperibili in versione digitale al seguente link:

www.claypaky.com

Rif: FIS00T - Safety Information Axcor 400 series

INF RMATI NEN ZUR SICHERHEIT

WICHTIG: Claypaky empfiehlt, die Sicherheitsinformationen bezüglich dieses Produkts genau zu lesen und

aufzubewahren. Sie sind in Digitalversion immer unter folgendem Link auffindbar:

www.claypaky.com

Ref: FIS00T - Safety Information Axcor 400 series

INF RMACI NES DE SEGURIDAD

IMPORTANTE: Claypaky recomienda leer detenidamente y conservar la información de seguridad relativa a este

producto. Además, está disponible una versión digital de la misma en el siguiente enlace:

www.claypaky.com

Ref: FIS00T - Safety Information Axcor 400 series

C NSIGNES DE SÉCURITÉ

IMPORTANT: Claypaky recommande de lire attentivement et de conserver les informations de sécurité relatives à

ce produit, disponibles en version digitale au lien suivant:

www.claypaky.com

Réf. : FIS00T - Safety Information Axcor 400 series

ИНСТРУКЦИЮ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ

ВАЖНО: Claypaky рекомендует внимательно про итать и сохранить инструкцию по технике безопасности

данного изделия, которая всегда доступна в электронном формате по следующей ссылке:

www.claypaky.com

Наименование: FIS00T - Safety Information Axcor 400 series

1. SAFETY INF RMATI N

AXCOR PROFILE 400 - 400 HC

PAN Mechanism Lock and Release (every 90°) - Fig. 2

TILT Mechanism Lock and Release (every 45°) - Fig. 3

2 3

Packing contents - Fig. 1

90°

LOCKED

UNLOCKED

45°

2 x 183102/805

2. UNPACKING AND PREPARATI N

AXCOR PROFILE 400 - 400 HC

3. INSTALLATI N AND START-UP

Connecting and disconnecting power cable - Fig. 5

Installing the projector - Fig. 4

The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall.

WARNING: with the exception o when the projector is positioned on the loor, the sa ety cable must be itted. (Cod. 105041/001 available on request).

This must be securely ixed to the support structure o the projector and then connected to the ixing point at the centre o the base.

3.1 Installing the fixture

3.2 Connecting to manis supply

AXCOR PROFILE 400 - 400 HC

Switching on the projector - Fig. 8

Press the switch. The projector starts resetting the effects. At the same time, the following information scrolls on the display:

Model Firmware Dmx Address xxx System errors

Axcor Version X.X.X .........................

400 Date - Hour .........................

On conclusion of resetting in case of absence of the dmx signal, Pan and Tilt move to the “Home” position (Pan 128 bit - Tilt 128 bit). The control panel

(Fig. 8) has a display and buttons for the complete programming and management of the projector menu. The display can be in one of two conditions:

rest status and setting status. When it is in the rest status, the display shows the projector’s DMX address.

During menu setting status, after a wait time (about 30 seconds) without any key having been pressed, the display automatically returns to rest status.

It should be noted than when this condition occurs, any possible value that has been modified but not yet confirmed with the

key will be cancelled.

Dmx Address

War ning Message

Connecting to the control signal line (DMX) - Fig. 7

Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm characteristic impedance, 22-24 AWG, low capacity. Do not use

microphone cable or other cable with characteristics differing from those specified. The end connections must be made using XLR type 5 pin male/female

connectors. A terminating plug must be inserted into the last projector with a resistance of 120Ohm (minimum 1/4 W) between terminals 2 and 3.

IMP RTANT: The wires must not make contact with each other or with the metal casing of the connectors. The casing itself must be connected to the

shield braid and to pin 1 of the connectors.

Connecting to the mains supply - Fig. 6

SIGNAL

SCREEN

DMX 512

5 PIN

SIGNAL

Mains

Continue ➔

3.3 Connecting the control signal line: DMX / Art-Net

3.4 Switching on the fixture and basic SetUp

AXCOR PROFILE 400 - 400 HC

Reversal of the display - Fig. 9

To activate this function, press UP

and DOWN

keys simultaneously while the display is in the rest mode. This status will be memorised and

maintained even for the next time it will be switched on. To return to the initial state, repeat the operation all over again.

Setting the projector starting address

On each projector, the starting address must be set for the control signal (addresses from 1 to 512).

The address can also be set with the projector switched off.

Functions of the buttons - Using the menu

Setting addresses and options with the projector disconnected

The projector’s DMX address, as well as other possible operating options, can also be set when the appliance is disconnected from the electricity supply.

All that is needed is to press

RIGHT

to momentarily activate the display and thus access the settings. Once the required operations have been

carried out, the display will switch off again after a wait time of 30 seconds.

USING THE MENU:

1) Press LEFT

once – “Main Menu” appears on the display.

2) Use the UP

and DOWN

keys to select the menu to be used:

• Setup (Setup Menu): To set the setting options.

• Option (Option Menu): To set the operating options

• Informations (Informations Menu): To read the counters, software version and other information.

• Manual Control (Manual control Menu): To trigger the test and manual control functions.

• Test (Test Menu): To check the proper functionning of effects

• Advanced (Advanced Menu): Access to the "Advanced menu" is recommended for a trained technical personnel.

3) Press

to display the first item in the selected menu.

4) Use the UP

and DOWN

keys to select the MENU items.

Confirms the displayed value, or activates the displayed function, or enters the successive

menu.

Decreases the value displayed (with auto-repetitions) or passes to the next item in the menu.

Increases the value displayed (with auto-repetitions) or passes to the previous item in a menu.

Return to the top level

Commute from units, tens, hundreds, in the "Address" and "Calibration" menù.

DOWN

LEFT

RIGHT

AXCOR PROFILE 400 - 400 HC

Locking and releasing Pan and Tilt movements - Refer to the instructions in the UNPAC ING AND PREPARATION section.

pening the head covers - Fig. 10.

Closing the head covers - Fig. 11.

1/4 Turn

121

10 11

Continue ➔

4. MAINTENANCE

4.1 pening the covers

Lower side

Upper side

AXCOR PROFILE 400 - 400 HC

Periodical cleaning - Fig. 12

To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The

frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality of the

working environment (air humidity, presence of dust, salinity, etc.).

Use a soft cloth dampened with any detergent liquid for cleaning glass to remove the dirt from the reflectors, from the lenses and filters. It is recommended

that the projector undergoes an annual service by a qualified technician for special maintenance involving at least the following operations:

•General cleaning of internal parts.

•Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Claypaky.

•General visual check of the internal components, cabling, mechanical parts, etc.

•Electrical, photometric and functional checks; eventual repairs.

N TE: keep a careful cleaning

of the ''CMY/colour filters assembly''

to prevent rapid deterioration.

Light collimation system

This product contains internal light

collimation system. Avoid intense

light from any angle.

4.2 Periodical cleaning

Parts requiring frequent cleaning.

AXCOR PROFILE 400 - 400 HC

Continue ➔

4.3 Effects module removal

Upper side

Extraction of the effect modules - Fig. 13.

IMP RTANT: Grasp the modules using the support structure and not the details which could get damaged.

Insertion of the effect modules: Repeat the operations indicated in Fig. 13, 14 and 15 in reverse order.

N TE:

- Do not disconnect wiring harnesses when the fixtures is switched-on, to avoid to damage electronic boards.

- Do not switch-on the fixtures with wiring harness disconnected.

Upper side

Extraction of the effect modules - Fig. 14.

IMP RTANT: Grasp the modules using the support structure and not the details which could get damaged.

Insertion of the effect modules: Repeat the operations indicated in Fig. 13, 14 and 15 in reverse order.

N TE:

- Do not disconnect wiring harnesses when the fixtures is switched-on, to avoid to damage electronic boards.

- Do not switch-on the fixtures with wiring harness disconnected.

AXCOR PROFILE 400 - 400 HC

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Claypaky Beleuchtungsausrüstung Handbücher

Claypaky

Claypaky MINI XTYLOS HPE Bedienungsanleitung

Claypaky

Claypaky ALPHA SPOT 1200 Bedienungsanleitung

Claypaky

Claypaky A.LEDA WASH K5 C61401 Bedienungsanleitung

Claypaky

Claypaky TAMBORA FLASH CL2020 Bedienungsanleitung

Claypaky

Claypaky CP COLOR 150 Bedienungsanleitung

Claypaky

Claypaky CP COLOR 400 SH Bedienungsanleitung

Claypaky

Claypaky C61070 Bedienungsanleitung

Claypaky

Claypaky IGLOO EASY - C61198 Bedienungsanleitung

Claypaky

Claypaky MINISCAN HP3 Bedienungsanleitung

Claypaky

Claypaky C61500 Bedienungsanleitung

Claypaky

Claypaky CP COLOR 250 Bedienungsanleitung

Claypaky

Claypaky ALPHA BEAM 1500 Bedienungsanleitung

Claypaky

Claypaky Alpha Spot 575 HPE Bedienungsanleitung

Claypaky

Claypaky Miniscan HPE Bedienungsanleitung

Claypaky

Claypaky SINFONYA PROFILE 600 Bedienungsanleitung

Claypaky

Claypaky C61365 Bedienungsanleitung

Claypaky

Claypaky SPHERISCAN C11260 Bedienungsanleitung

Claypaky

Claypaky STAGE COLOR 300 Bedienungsanleitung

Claypaky

Claypaky PIN SCAN Bedienungsanleitung

Claypaky

Claypaky STAGE COLOR 300 AE Bedienungsanleitung

Claypaky

Claypaky AROLLA PROFILE MP Bedienungsanleitung

Claypaky

Claypaky AXCOR BEAM 300 Bedienungsanleitung

Claypaky

Claypaky C52162 Bedienungsanleitung

Claypaky

Claypaky TAMBORA LINEAR 100 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung