Clearaudio Master Innovation Bedienungsanleitung

User manual

I nnovation

Picture: Package with

Clearaudio tonearm „TT3“

and Clearaudio cartridge

„Titanium V2 “.

I nnovation Wood

Picture: Package with

Clearaudio tonearm

„Universal“ and Clearaudio

cartridge „da Vinci V2 “.

Pic. similar

User manual

Page 2 © clearaudio electronic GmbH, 2022-11

Dear Clearaudio customer,

Congratulation’s to your choice of the

Innovation / Innovation Wood

(in the following:

Innovation

named) turntable, a world class turntable, handmade in Germany by Clearaudio electronic GmbH.

Resonance minimizing chassis construction in a sandwich in combination with the innovative motor

unit (low noise level and high turning moments), guarantees total isolation of resonances from the

turntable chassis, providing the best music reproduction and authentic High End imaging.

A high precision, maintenance free sinter bronze bearing is completing the analogue pleasure.

The Clearaudio patented CMB-Bearing-Technology, an inverted bearing with jewelled and polished

ceramic bearing shaft and a bronzed liner, provides frictionless analog enjoyment.

Please read this instruction manual carefully, to avoid any damages or loss of warranty.

This manual will help you for an easy setup and guarantees the highest pleasure for a long time.

We wish you a lot of musical enjoyments with your new Clearaudio

Innovation

turntable.

Clearaudio electronic GmbH

User manual

Made in Germany Page 3

Safety instructions

1. General information

Check the turntable for any damage before using it. Do not connect the turntable if damaged!

Never connect the turntable if it has been dropped or gotten wet, contact your dealer to have the turntable checked.

Never expose the turntable to rain or moisture.

Never touch the power cord of the device with wet hands.

Regular visual inspections for defective insulation on the connection cable are also recommended for your own safety.

A damaged cable should be replaced immediately by a specialist!

Never pull on the power cord to unplug the device. Always pull directly on the plug!

The inside of the turntable is maintenance free. Never open the case or attempt to repair the unit yourself, since this

can lead to loss of warranty!

We recommend disconnecting the power supply from the mains if you do not operate the device for a longer period of

time.

The turntable does not feature an automatic shut-o mechanism.

Therefore, as soon as the stylus has reached the run-out groove, engage the tonearm lift and switch the turntable o.

Not suitable for children! Scope of delivery may contain small parts that can be swallowed.

2. I ntended use

The

Innovation

is a turntable for playing records.

The intended use of the

Innovation

in accordance with the information provided in the user manual only.

The power supply may only be operated with maximum permissible connection values according to the technical data.

Any other use or modication of this product is not intended.

3. Location of installation

Avoid locations with direct sunlight, temperature uctuations and high humidity.

Likewise, avoid placing electronic devices near heaters, heat lamps, or other devices that produce heat.

The device is designed for operation at room temperature.

No objects with an open ame may be placed on or near the device (burning candles or similar).

4. Overload

The product is designed to comply with all necessary safety regulations. However, you should not leave the device

unattended under extreme loads.

5. Maintenance

Never use agressive cleaning detergent.

Do not use dry cloths for cleaning as this generates static electricity. Suitable cleaning and care products from Clearaudio

are available from www.analogshop.de or from specialist retailers.

The bearing of the turntable platter can be lubricated every 2 years with the oil provided.

Put 1 or 2 drops of the oil into the bearing for lubrication.

User manual

Page 4 © clearaudio electronic GmbH, 2022-11

6. Health information

Permanently high volume can lead to various types of hearing damage. Use high volume responsibly!

7. Service

The

Innovation

turntable should be repaired during the guarantee period by the manufacturer only, otherwise the

warranty claim expires. All Clearaudio products should only be serviced by specialist retailers.

If, despite the high production standard, a service is necessary, the

Innovation

turntable must be send to Clearaudio

through your dealer.

8. Transport

Use the original packing material for further transportation of the

Innovation

turntable, otherwise serious damage could

occur.

Be sure to pack the device exactly as it was shipped.

Safe transport is only guaranteed in the original packaging.

Proceed in reverse as described for assembly when packing.

Always remove the turntable platter and replace the foam securing the sub-platter and cover the bearing with tape as

well. Otherwise serious damage can occur.

Remove also the pulley from the motor axle to avoid any damage during transport.

Clearaudio assumes no liability for any damage that may occur due to incorrect packing.

9. Disposal

Do not dispose this product together with other waste.

WEEE Reg. No.: DE26004446

10. CE Marking

This electronic product corresponds to the applicable guidelines for obtaining the CE mark.

User manual

Made in Germany Page 5

Contents

1. Packing overview ............................................................. 6

2. List of components ........................................................... 7 - 8

3. I nstallation and setup ...................................................... 9 - 14

4. Fine adjustment of the motor .......................................... 15

5. Troubleshooting ............................................................... 16 - 17

6. Technical data .................................................................. 18

Warranty information........................................................... 19 - 20

Stroboscope Testrecord user manual................................... 21 - 22

User manual

Page 6 © clearaudio electronic GmbH, 2022-11

1. Packing overview

Pic. 1: Packing overview

Accessories,

user manual,

warranty card,

Clearaudio Quality

Card,

Stroboscope

Testrecord

Innovation

turntable chassis incl.

mounted lower

bearing part and

integrated motor unit;

optional: Tonearm

Stainless steel-sub-

platter; Delrin or

Acrylic platter;

power supply;

upper bearing part

and – cap

optional: Cartridge

User manual

Made in Germany Page 7

2. List of components

Clearaudio has developed a special and secure packing for your

Innovation

turntable that ensures

a safe transportation. Please keep this original packing, if you need to ship the turntable.

Below you nd the part list of the Clearaudio

Innovation

turntable:

Pic. 2: List of components

123

7a 7b

1. Turntable body with mounted

lower bearing part

5. Bearing part

2. Stainless steel sub-platter 6. 3 x Flat Pads

3. Delrin or Acrylic (Wood version)

turntable platter

7. Optional: Clearaudio

Universal

(7 a) or

Magnify

(7 b) tonearm with counterweight

to adjust the tracking force

4. Power supply 8. Mounting clip for stainless steel sub-platter

and hex wrench

Pic. 7b: Clearaudio

Magnify

tonearm

Pic. 7a: Clearaudio

Universal

tonearm

User manual

Page 8 © clearaudio electronic GmbH, 2022-11

Continuation of components list

910 11

12 13 14

15 16 a 17

9. 1 Pair of white gloves 15. Bearing oil for occasional use

10. Grounding - wire for the Innovation

turntable (to connect in the bottom

bearing part)

16 a

16 b

Optional in package:

Clearaudio MC cartridge

da Vinci

Clearaudio MC cartridge

Talismann

Clearaudio

Smart Stylus Gauge

11. Level gauge for the turntable

alignment

17. Clearaudio

Stroboscope Testrecord

(Art. No. AC038) to adjust the exact speed

12. 1 pcs. at belt 18. Optional in package:

Turntable + tonearm + cartridge

No illustration:

Cartridge alignment gauge

for

Unify

Universal

tonearm (optional)

13. 4 pcs. hex wrench; sizes: # 1,5; #

2,5; # 3; # 7

19. Not shown: warranty card, Clearaudio

Quality Card, Sales return paper

14. Screw driver 17. Not shown: User Manual

Pic. 2.1: List of components

I MPORTANT NOTI CE:

Please double check the tightness of all bolts, hardware, and mounting pods, as temperature

uctuations during transit may have caused the hardware to become loose.

16 b

User manual

Made in Germany Page 9

3. I nstallation and set up

The setup of the

Innovation

turntable is easy as the turntable chassis is pre-assembled and has been

tested at the factory.

Please use the white gloves enclosed in order to avoid scratches or unwanted ngerprints (platter).

The

Innovation

turntable requires a space for setup of at least 18.90 inch x 19.29 inch.

18.90 inch

/ 480 mm

19.29 inch / 490 mm

Pic. 3: Required set - up space

User manual

Page 10 © clearaudio electronic GmbH, 2022-11

Please follow the description step by step:

1.)

First take out the three black at pads out of the accessory bag.

Place these at pads on your hi-rack or another suitable base, where the nal position of your

Innovation

turntable will be.

2.)

After that, take the I nnovation turntable body of the next packing layer and place the spikes of the

turntable on the at pads.

Pic. 4:

Innovation

with tonearm base

Pic. 6: Oiling the bearing shaft

3.)

To avoid hum noises we recommend to ground the bearing. For that attach the supplied grounding

wire to the bearing cap with the existing screw.

Pic. 5: Grounding the bearing of the

Innovation

4.)

Remove the protective security tape from the bearing housing.

Place two drops of the synthetic bearing oil on the ceramic bearing shaft.

(also available at www.analogshop.de, Art. No. AC068)

Andere Handbücher für Master Innovation

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clearaudio Drehscheibe Handbücher

Clearaudio

Clearaudio Stroboscope Testrecord Bedienungsanleitung

Clearaudio

Clearaudio Verify Bedienungsanleitung

Clearaudio

Clearaudio Master Solution Bedienungsanleitung

Clearaudio

Clearaudio Clarify Bedienungsanleitung

Clearaudio

Clearaudio Bluemotion & Satisfy Bedienungsanleitung

Clearaudio

Clearaudio Charisma V2.1 MM Bedienungsanleitung

Clearaudio

Clearaudio Universal Bedienungsanleitung

Clearaudio

Clearaudio Champion Handbuch

Clearaudio

Clearaudio Emotion Start Smart Bedienungsanleitung

Clearaudio

Clearaudio Master Innovation Bedienungsanleitung

Clearaudio

Clearaudio Emotion CMB Upgrade Kit Bedienungsanleitung

Clearaudio

Clearaudio CMB-Bearing Bedienungsanleitung

Clearaudio

Clearaudio smart matrix SILENT Bedienungsanleitung

Clearaudio

Clearaudio Satisfy Kardan Bedienungsanleitung

Clearaudio

Clearaudio Emotion SE Bedienungsanleitung

Clearaudio

Clearaudio Jubilee MM Bedienungsanleitung

Clearaudio

Clearaudio Double Matrix Professional SONI C Bedienungsanleitung

Clearaudio

Clearaudio TT1-MI Bedienungsanleitung

Clearaudio

Clearaudio Maximum Solution Bedienungsanleitung

Clearaudio

Clearaudio Swing base Bedienungsanleitung

Clearaudio

Clearaudio Ovation Bedienungsanleitung

Clearaudio

Clearaudio Concept Bedienungsanleitung

Clearaudio

Clearaudio Master Innovation Bedienungsanleitung

Clearaudio

Clearaudio Innovation Compact Bedienungsanleitung

Beliebte Drehscheibe Handbücher anderer Marken

Gemini

Gemini CDT-05 MKII Bedienungsanleitung

Rotel

Rotel RP-820 Bedienungsanleitung

Shuman

Shuman MC-250BT Bedienungsanleitung

Stanton

Stanton STR8-150 Bedienungsanleitung

Audio Technica

Audio Technica AT-LPW40WN Bedienungsanleitung

Crosley

Crosley McQueen CR7011-GY Bedienungsanleitung

Reloop

Reloop SMP-1 Bedienungsanleitung

auna

auna TT-Classic Plus Bedienungsanleitung

COMO AUDIO

COMO AUDIO Turntable Analog Bedienungsanleitung

Dual

Dual 1009 F Bedienungsanleitung

REED

REED Muse3C Bedienungsanleitung

AXIOMTEK

AXIOMTEK OPS883-H Series Bedienungsanleitung

Pioneer

Pioneer PL-71 Bedienungsanleitung

Vestax

Vestax PDX-a1 Bedienungsanleitung

Denon

Denon DP-400 Bedienungsanleitung

Dual

Dual 504 Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP60XBT Bedienungsanleitung

Goldring

Goldring G99 Bedienungsanleitung