Clearaudio Master Innovation Series Bedienungsanleitung
User manual
© clearaudio electronic GmbH, 2019-03 Made in Germany
Master Innovation
Master Innovation Black
Picture with:
Clearaudio tonearm „Universal“
and clearaudio cartridge
„Goldnger Statement“.
Master Innovation Wood
Picutre with:
Clearaudio tonearm „TT1 MI“
and Clearaudio cartridge
„Goldnge Statement“.
User manual
2 © clearaudio electronic GmbH, 2019-03
Dear Clearaudio customer,
Congratulations on your purchase of the
Master Innovation
turntable, a world class turntable
handmade in Germany by Clearaudio electronic GmbH.
The
Master Innovation’s
state-of-the-art combination of a no-contact magnetic drive, frictionless
Ceramic Magnetic Bearing and self-regulating, sensor-controlled Optical Speed Control guarantees
incrediblepitchstabilityandfreedomfromnoiseleadingtounbelievablyrealisticmusicalreproduction.
Its resonance minimizing chassis construction comprises four layers of a complex ‚sandwich‘ of
aluminium – Panzerholz bullet-proof wood – aluminium, and includes provision for up to three
tonearms, allowing for complete exibility of tonearm and cartridge.
Please note that this instruction manual contains a brief overview to enable quick and easy setup.
A fuller instruction manual will be sent out in due course.
We wish you a great deal of musical enjoyment with your new Clearaudio
Master Innovation
turntable.
Clearaudio Electronic GmbH
This section must be read before any connection is made to the mains supply.
WARNING
Do not expose your turntable to rain or humidity.
Do not handle mains leads with wet hands.
Do not place or insert anything into the equipment or through the ventilation holes.
No naked ame sources, such as lighted candles, should be placed on the equipment.
CE-MARKING
EQUIPMENT MAINS POWER SETTING
Your Clearaudio product has been prepared to comply with the household power and safety requirements
that exist in your area. This product can be connected from 110V to 230V AC (50Hz and 60Hz).
TheClearaudio
MasterInnovation
meets the regulationsconcerning electromagneticdisturbance
(EMC) and low-voltage appliances.
User manual
Made in Germany 3
Contents
1. Packing overview ................................................ 4
2. List of components .............................................. 5
3. Installation and setup ......................................... 7
4. Fine adjustment of the motor ............................. 15
5. Special instructions ............................................. 16
6. Technical data ..................................................... 17
Warranty information ............................................. 18 - 19
Stroboscope test record user manual ..................... 20 - 21
User manual
4 © clearaudio electronic GmbH, 2019-03
1. Packing overview
Pic. 1: Packing overview
Accessories,
user manual,
warranty card,
Clearaudio quality
card, Stroboscope
Test Record
Master Innovation
turntable chassis
including mounted
lower bearing part
and integrated motor
unit;
optional tonearm
Stainless steel
subplatter with scale
ring, Delrin or acrylic
platter; optional
power supply;
cartridge; drive
bearing
Carton 2 of 3:
pre-mounted drive
unit
Carton 3 of 3
(not pictured):
stainless steel
sub-platter and
platter
User manual
Made in Germany 5
2. List of components
Clearaudio’s special secure packaging for your
Master Innovation
turntable ensures safe
transportation. Please keep this original packaging, in case you need to transport or ship the turntable
at any point in the future.
Clearaudio
Master Innovation
components list:
Pic. 2: List of Components
12
34
56
1. Drive unit 5. Drive bearing with ceramic ball
2. Top unit with pre-mounted
tonearm base (carton 2 of 3) 6. Power supply
3. Stainless steel sub-platter 7. 3 x at pads
4. 28mm Delrin or acrylic turntable
platter
7
User manual
6 © clearaudio electronic GmbH, 2019-03
8 9 10
11 12 13
14 15 16
8. 1 pair of white gloves 14. 2x Bearing oil for occasional use
9. Grounding wire (to connect to the
underside of the bearing part) 15. Clearaudio
Smart Stylus Gauge
10. Level gauge for turntable align-
ment 16. Clearaudio
Stroboscope Test Record
(Art. No. AC038) to adjust the exact speed
11. 2 pcs. Flat belts 17. Not shown:
User manual, warranty card, Clearaudio
quality certicate card, sales return paper
12. 4 hex keys; sizes: #2.5 / 3 / 7 / 8 18. Not shown: stainless steel sub-platter and
platter (carton 3 of 3)
13. Screwdriver 19.
Pic. 2.1: List of components
IMPORTANT NOTICE: Please double check the tightness of all bolts, hardware and mounting
pods, as temperature uctuations during transit may have caused the hardware to become loose.
User manual
Made in Germany 7
3. Installation and setup
The setup of the
Master Innovation
turntable is easy as the turntable chassis is pre-assembled and
has been tested at the factory.
Please use the white gloves enclosed in order to avoid scratches or unwanted ngerprints (platter).
The
Master Innovation
turntable requires a setup space of at least 18.90 x 19.29 inches.
18.90 inches
480mm
19.29 inches / 490mm
Pic. 3: Required setup space
User manual
8 © clearaudio electronic GmbH, 2019-03
Carton 1 of 3:
1.)
First, take out the three black at pads from the accessory bag. Place these at pads on your hi-
rack or another suitable base, where the nal position of your
Master Innovation
turntable will be.
2.)
Then take the
Master Innovation
turntable body (drive unit) from the next packaging layer and place
the turntable’s spikes onto the at pads.
Pic. 4:
Master Innovation
drive unit
3.)
To avoid humming noises it may be necessary to ground the bearing. To do so, plug the ground
cable provided into the hole in the bearing xing bolt on the underside of the turntable.
Pic. 5: Grounding the bearing
4.)
Remove the protective security tape from the bearing housing.
User manual
Made in Germany 9
5.)
Take the drive bearing out of the box. Please remove the bearing protection lm carefully and apply
2-3 drops of the bearing oil (provided, and also available at www.analogshop.de).
Carefully place the bearing onto the bearing axis.
6.)
Remove the protection lm from the sensor mounted on the turntable chassis.
Please do so extremely carefully to avoid introducing any dirt or scratches.
Carefully take the stainless steel platter out of the box, using both hands. Remove the protection
lm from the scale ring on the lower side of the turntable. The lower platter side with the scale ring
must be face down when placing it on the bearing.
Again, please remove the lamination extremely carefully to avoid introducing any dirt
or scratches.
Pic. 6: Setup of the bearing
Pic. 8: Montage of the sub-platter with the scale ring
Pic. 7: Setup of the bearing
User manual
10 © clearaudio electronic GmbH, 2019-03
7.)
Take the drive platter out of the box and remove the protective lm. Using both hands, place the
drive unit platter onto the bearing, so that the magnets are showing on the top. Please be very
careful.
Pic. 9: Placing the drive unit platter onto the bearing
8.)
Place one of the two drive belts provided (the second is a spare) around the platter and around the
motor pulley.
Pic. 10: Placement of the drive belt
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Clearaudio Drehscheibe Handbücher
Clearaudio
Clearaudio TT1-MI Bedienungsanleitung
Clearaudio
Clearaudio Swing base Bedienungsanleitung
Clearaudio
Clearaudio Magnify Bedienungsanleitung
Clearaudio
Clearaudio Double Matrix Professional Bedienungsanleitung
Clearaudio
Clearaudio Emotion SE Bedienungsanleitung
Clearaudio
Clearaudio Bluemotion & Satisfy Bedienungsanleitung
Clearaudio
Clearaudio Statement V2 Bedienungsanleitung
Clearaudio
Clearaudio Ovation Bedienungsanleitung
Clearaudio
Clearaudio Maximum Solution Bedienungsanleitung
Clearaudio
Clearaudio Ovation Bedienungsanleitung
Clearaudio
Clearaudio Ovation Bedienungsanleitung
Clearaudio
Clearaudio TT5 Bedienungsanleitung
Clearaudio
Clearaudio Perfomance SE Bedienungsanleitung
Clearaudio
Clearaudio TT3 Bedienungsanleitung
Clearaudio
Clearaudio Unify Series Bedienungsanleitung
Clearaudio
Clearaudio Emotion SE Bedienungsanleitung
Clearaudio
Clearaudio Innovation Compact Bedienungsanleitung
Clearaudio
Clearaudio Ambient Bedienungsanleitung
Clearaudio
Clearaudio Concept Bedienungsanleitung
Clearaudio
Clearaudio Master Innovation Bedienungsanleitung
