Clifford Auto Immobilizer Bedienungsanleitung

Owner'sManual

World-ClassAutoSecurity TM

Standard Features

✔Lifetime Warranty — For as long as you own the vehicle, Clifford

Electronics will repair or replace the control unit free of charge.

✔A Pair of VirtualKeys™ — These ingenious proximity keys that are

attached to your car keys communicate through the airwaves with the

engine immobilization system even before you insert your car key into

the ignition switch. These keys are truly virtual since they are completely

“user-transparent.” There is nothing you need to do in order to either arm

or disarm your VirtualKey AutoImmobilizer.

n280,000,000,000,000 Digital Codes — Each VirtualKey utilizes a truly

unique digital code selected from a code universe of more than

280,000,000,000,000 digital codes. No two VirtualKeys will ever have

the same code. Even if a thief had the ability to rapidly create codes, it

would still take millions of years of constant work!

nUser-Transparent Arming and Disarming — There are no remote

controls, no personal codes to remember, no receptors to touch, no

trouble whatsoever. The driver of the vehicle does absolutely nothing

in order to arm or disarm the VirtualKey AutoImmobilizer. It’s all

automatic and user-transparent.

nIncredibly Rugged — These little keyfobs have no battery to run down

nor mechanical parts to wear out. VirtualKeys are weather-proof,

water-proof and virtually indestructible.

✔MultiPoint™ Immobilization with On-Board Relays — Three on-board

circuits electronically interrupt the ignition system, starter motor and the

electric fuel pump or other device to make it virtually impossible for a

thief to start your vehicle.

✔Attempted Theft Alert — For maximum theft alert, the system will sound

an alarm by triggering the car horn or optional siren if the door is opened

and the ignition key that has the VirtualKey attached has not been inserted

into the ignition switch. The horn/siren will sound for up to five siren

duration cycles of 30 seconds each.

Standard Features (cont.)

✔MultiKey™ Recognition — The VirtualKey AutoImmobilizer accepts up to

30 different VirtualKeys.

✔MultiCar Protection — If you have more than one car, you can use any of

the VirtualKeys to control any or all of your other vehicles, even if each

vehicle has an entirely different ignition key.

✔AutoArming™— The system arms itself automatically (passively) sixty

seconds after you remove your key from the ignition switch. There is

nothing that you need to do or remember to make sure your valuable

vehicle is protected. This may qualify you for an insurance discount that

can pay for the system.

✔Instant Code Learning — You can easily add new VirtualKeys in seconds,

yet it’s totally secure.

✔Instant Code Deletion — If one of the VirtualKeys is ever lost or stolen, a

simple procedure will clear all the VirtualKey codes from the system’s

non-volatile memory so that the remaining VirtualKeys may be

reprogrammed into the system.

✔Dual Grounds — To thwart tampering and assure unfailing operation.

✔Non-Volatile Memory — The VirtualKey AutoImmobilizer remembers all

the VirtualKey codes associated with your system even if the power is

disconnected.

✔Fault-Proof Driving Safety — Clifford’s unique electronic circuitry assures

that the VirtualKey AutoImmobilizer cannot inadvertently shut down the

car’s engine while the owner is driving.

✔Sabotage-Proof Electronics — Since no thief can outsmart the VirtualKey

AutoImmobilizer, what about brute force? That won’t do it either. Even if

the thief found the system control unit and ripped it out of the car, the

engine still won’t start!

✔High-Luminescence LED Status Indicator — Indicates system status and

provides visual deterrence. 2

Operation of your VirtualKey AutoImmobilizer

Proper Attachment of the VirtualKey to the Ignition Key

The VirtualKey MUST BE ATTACHED DIRECTLY to the vehicle’s

ignition key and NOT to a keychain. The reason is that the VirtualKey code

must be electronically read through the airwaves by the AutoImmobilizer’s

antenna, which is located near your vehicle’s ignition switch. Since the

range is, by design, only a few inches, the closer the VirtualKey is to the

antenna, the better is the likelihood of trouble-free operation.

To drive your vehicle

When the system is active, the dashboard or console-mounted LED will be

flashing. When you open your car door, you must immediately insert your

car key into the ignition switch (otherwise the horn or optional siren will

sound).

When you insert your car key, the Virtual Key comes into close proximity

to the VirtualKey detector mounted near the ignition switch. The system

instantly reads and verifies the secret code of the VirtualKey and, if it

matches, releases its electronic immobilization of your vehicle’s starter

motor, ignition system and electronic fuel pump. The LED turns off to

confirm this.

AutoArming

There’s nothing you need to do to set the VirtualKey AutoImmobilizer.

Sixty seconds after you remove your key from the ignition switch, the

system automatically engages its electronic immobilization of your

vehicle’s starter motor, ignition system and electronic fuel pump. When it

does so, the LED status indicator will flash repeatedly.

Even if a thief has an exact duplicate of your car key, he still won’t be able

to start the engine. In fact, if he tries to start it without your VirtualKey in

place, the system will sound the horn or optional siren and continue its triple

lockout of the starter, ignition and fuel pump.

Adding New VirtualKeys

Your VirtualKey AutoImmobilizer will accept as many as 30 different

VirtualKeys. To add additional VirtualKeys to your system, do the following:

1. Remove the VirtualKey from your ignition key.

2. Open a door and leave it open.

3. Turn the ignition switch to the “ON” position.

4. Immediately bring the VirtualKey you removed within an inch of the

ignition switch. The LED will turn off (system is disarmed). As soon as

the LED turns off, move the VirtualKey away. Repeat this for a total of 5

times. When you bring the VirtualKey into range the 5th time, the LED

will light and remain lit to indicate the system is in program mode.

5. Within 60 seconds, bring each new VirtualKey to within an inch of the

ignition switch. When you do so, you will note that the LED will blink off

once to indicate that that VirtualKey has been registered and the system will

now accept it. Repeat this step for any other VirtualKeys you wish to add.

6. Turn the ignition off to end program mode.

How to Delete the Code(s) of Lost or Stolen VirtualKeys(s)

You can erase the codes of lost or stolen VirtualKeys so that they can never

be used disarm your VirtualKey AutoImmobilizer. When you have

completed steps 1-5 of this section, you MUST follow the procedure above

to add all remaining VirtualKeys to the system, otherwise the system will

respond to ANY unprogrammed VirtualKey.

1. Remove the VirtualKey from your ignition key.

2. Open a door and leave it open.

3. Turn the ignition switch to the “ON” position.

4. Immediately bring the VirtualKey you removed within an inch of the ignition

switch to disarm (LED will turn off), then move it away. Repeat this for a

total of 5 times, then, on the 5th time hold it within an inch of the ignition

switch for 30 seconds. When you do so, the LED will light and stay lit to

indicate program mode. After 30 seconds of holding it in place, the LED

will turn off to indicate all codes have been erased from memory.

5. Turn the ignition off to end programming mode.

6. IMPORTANT: At this stage, your system will disarm when ANY

VirtualKey is used, so immediately use the “Adding New VirtualKeys”

procedure above to add all your remaining VirtualKeys.

InstallationManual

World-ClassAutoSecurity TM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clifford Autoalarmanlage Handbücher

Clifford

Clifford Bullet II Bedienungsanleitung

Clifford

Clifford 10.5X Bedienungsanleitung

Clifford

Clifford Ultramax XL3500 Bedienungsanleitung

Clifford

Clifford ACE 7500 Bedienungsanleitung

Clifford

Clifford RSX3.2 Bedienungsanleitung

Clifford

Clifford Nova 200LE Bedienungsanleitung

Clifford

Clifford 4706X Responder LC3 Bedienungsanleitung

Clifford

Clifford 5606X Bedienungsanleitung

Clifford

Clifford SmartWindows 4 Bedienungsanleitung

Clifford

Clifford Responder LC3 4706X Bedienungsanleitung

Clifford

Clifford BlackJax 4 Bedienungsanleitung

Clifford

Clifford Concept 450 Bedienungsanleitung

Clifford

Clifford concept 50 Bedienungsanleitung

Clifford

Clifford Sabre Bedienungsanleitung

Clifford

Clifford cyber Arrow 3 Bedienungsanleitung

Clifford

Clifford 420.4X Bedienungsanleitung

Clifford

Clifford Concept 40 Bedienungsanleitung

Clifford

Clifford 330X1 Bedienungsanleitung

Clifford

Clifford Concept 650 Bedienungsanleitung

Clifford

Clifford Matrix 12.2X Bedienungsanleitung

Clifford

Clifford Model RSX3.5 Bedienungsanleitung

Clifford

Clifford 4606X Bedienungsanleitung

Clifford

Clifford 4806X Bedienungsanleitung

Clifford

Clifford cyber Arrow 3 Bedienungsanleitung

Beliebte Autoalarmanlage Handbücher anderer Marken

Ultra Start

Ultra Start 2500M SERIES Bedienungsanleitung

Ultra Start

Ultra Start 650 Series Bedienungsanleitung

Audiovox

Audiovox Prestige Platinum+ APS-511C Bedienungsanleitung

Sparkrite

Sparkrite SRA8 Bedienungsanleitung

Viper

Viper 4708V Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Handbuch

Falcon

Falcon Predator XL3 Benutzerhandbuch

Audiovox

Audiovox Auto Security XR91 Betriebsanleitung

CrimeStopper

CrimeStopper CS-8717 Kurzanleitung

Scytek electronic

Scytek electronic Vectra X3 Bedienungsanleitung

Gemini

Gemini 7057 Bedienungsanleitung

FlashLogic

FlashLogic FLRSBA PRESTIGE Bedienungsanleitung

Magicar

Magicar FAI-440 Bedienungsanleitung

Viper

Viper 560XV Bedienungsanleitung

SECO-LARM

SECO-LARM 300C Bedienungsanleitung

Python

Python 660XP Bedienungsanleitung

Megalarm

Megalarm MEGA 3600 Bedienungsanleitung

CrimeStopper

CrimeStopper CS-2011RS Series III Super Rage Bedienungsanleitung