Climax Vesta Series Bedienungsanleitung

Aug 21st, 2019

Table of Contents

1. INTRODUCTION ................................................................................................................................................... 1

1.1. PARTS IDENTIFICATION...................................................................................................................................... 1

1.2. ACCESSORIES INCLUDED.................................................................................................................................. 2

2. INSTALLATION GUIDE........................................................................................................................................... 3

2.1 ANTENNA BOX INSTALLATION ................................................................................................................................ 3

2.2 PWSR INSTALLATION............................................................................................................................................. 4

2.3 SOFTWARE INSTALLATION ...................................................................................................................................... 5

3. SYSTEM CONFIGURATION .................................................................................................................................... 6

3.1. FINDER SOFTWARE ........................................................................................................................................... 6

3.2. SYSTEM ............................................................................................................................................................. 7

3.3. RF SNIFFER....................................................................................................................................................... 9

3.4. SR PROGRAM.................................................................................................................................................. 11

3.5. NETWORK........................................................................................................................................................ 12

3.6. I/O SETTING..................................................................................................................................................... 13

3.7. UPDATE &RESET............................................................................................................................................ 14

1.Introduction

The Patient Wandering System Receiver (PWSR), integrating Power over Ethernet into the

design, features wireless radio and input/output connections. Two antennas boxes are

connected to PWSR via telephone cords to capture RF signals in the air and report these

signals to the connected Server when users walk by the antennas. In addition, the built-in I/O

terminals can be further programmed to act on certain triggers.

1.1. Parts Identification

1 Power LED (Green)

ON: Power on

OFF: Power off

2 Indoor RF Sniffer LED (Red)

Flash: Reporting after RF signal reception

3 Outdoor RF Sniffer LED (Red)

Flash: Reporting after RF signal reception

4 I/O Trigger Indication LED (Blue)

ON: When an Input terminal is triggered, the Blue

indication LED will turn ON.

5 RF Port (Outdoor)

6 RF Port (Indoor)

7 Input & Output Terminal

Input: N.O. or N.C. connection

Output: DC 5V 30mA output

8 Ethernet Port

9 Factory Reset Button

10 Indoor or Outdoor Antenna Terminal

1.2. Accessories Included

A. 1x PWSR Mounting Bracket

B. 1x Ethernet Cable

C. 2x Telephone Cord (1.8M)

D. 2x Antenna Box Mounting Bracket

E. 2x Rotating Holder

F. 6x Wall Plugs for PWSR Mounting Bracket and Rotating Holders

G. 2x Flat Head Screws (3.5*22MM) for PWSR Mounting Bracket

H. 2x Machine Screws (4*8MM) for Antenna Box Mounting Brackets

I. 4x Tapping Screws (3.5*15MM) for Rotating Holders

2.Installation Guide

2.1 Antenna Box Installation

Step 1. Choose suitable locations above the door to install the Antenna Boxes. One

Antenna Box should be installed indoor, and the other Antenna Box should be

installed outdoor.

Step 2. Find the Rotating Holder provided (Picture1), and fix it to the wall with provided

screws.

Step 3. Fix the mounting plate on the swivel ball with the fixing screw secured through the

foolproof design hole, and then hook the Antenna Box onto the mounting bracket.

(Picture2)

Step 4. Rotate the swivel ball to adjust the Antenna Box’s orientation. It is recommended to

have the Antenna Box parallel to the wall for optimal performance. Lock the

position by firmly tightening the angle adjusting screw. (Picture3)

Picture1

Picture2

Picture3

2.2 PWSR Installation

Step 1. Choose a suitable location for the Receiver. Usually it is installed near the Indoor

Antenna Box. The Receiver also requires Ethernet with POE capability to operate.

Step 2. Find the PWSR Mounting Bracket provided, use the holes on the bracket to mark

mounting location on the wall. (Picture4)

Step 3. Drill holes into marked location and insert wall plugs if required, screw the bracket

onto the mounting location. Then Hook the PWSR onto the mounting bracket.

(Picture5)

Step 4. Use the provided telephone cords to connect the indoor Antenna Box and outdoor

Antenna Box to PWSR’s indoor RF port and outdoor RF port respectively.

(Picture6, 7)

Step 5. Plug in the Ethernet cable into Ethernet port to power up the Receiver.

Picture4

Picture5

Picture6

Picture7

2.3 Software Installation

The PWSR can be setup via LAN connection. Aspecial “Finder”software is provided for

identifying the Receiver on local network. Insert the installation CD into the CD-ROM drive,

locate the “Finder 1.x.exe”file, execute the file to install Finder software.

3.System Configuration

3.1. Finder Software

Use the Finder Software to connect to panel for programming.

Step 1. Execute the Finder software, it will search the local network and display PWSR

LAN IP automatically if the receiver is located. If no Receiver information is

displayed, check Receiver power and Ethernet and click “Search”to refresh search

result.

The Receiver’s network information can be programmed manually by selecting the

Receiver and clicking “Configure Setting”.

For name and password, enter admin / admin1234. Configure the network setting

and click OK to confirm when finished.

Step 2. Double click the Receiver info to open the browser and connect to Receiver

webpage. You will be required to enter a username and password.

Default Username: admin

Default Password: admin1234

Step 3. Upon entering correct username and password, you will enter the Receiver’s

Welcome webpage:

The Welcome Page displays

Firmware revision: The firmware version of the Control Panel

MAC address: The MAC address of your Control Panel

Click on the top column selections to enter different webpages for function selection.

3.2. System

Click on the “System”selection for Time zone and Date / Time settings, and configuration

backup.

Time zone:

A number of time zones are available to be selected. Press the “Change Timezone”

button to confirm time zone change.

Date & Time:

Adjust the Date and Time to the local time by clicking on the selection buttons. Press

the “Adjust Time”button to confirm Date and Time changes.

The Date and Time will be synchronized to the local time after connecting to internet.

Configuration Backup:

Click on “Configuration Backup”to backup and restore your panel settings.

Click Backup configuration by saving as file to download current panel

configuration as a .bin file into your computer.

To apply a previously downloaded configuration setting to current panel, click

“Choose File”, select the .bin file in your computer and click “Restore”to apply

setting to panel.

Andere Handbücher für Vesta Series

Inhaltsverzeichnis

Andere Climax Empfänger Handbücher

Climax

Climax Vesta Series Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung