Cloud drive intelligent technology Co.,Ltd
Empower and serve the global eBike industry
Business Cooperation
6. Operating Instruction
6.1. Display power on/off
Click button to power on the display and the display start to work, under power on condition,
long press button for 3s to power off the display. Under power off condition, the display no longer
uses the battery power, the display electric leakage current is less than 2µA.
6.2. Headlight function on/off
Under power on condition, click button to turn on the headlight, meanwhile, the headlight
icon will appear on the screen. Click button again will turn off the headlight.
6.3. USB charging function on/off
While in the main interface, click button to turn on/off the USB charging function.
6.4. PAS level selection and 6Km/h walk assistance mode
Under power on condition, click or button to switch the PAS level and change the
motor output power. The display’s default output power range is level 0 - 5. When at level 0, long press
button will enter the 6Km/h walk assistance mode, release button to cancel this function.
6.5. Display main interface
The display main interface will indicate: Real-time speed, Speed unit, ODO(Total distance), Trip
(Single time distance), Maximum speed, Average speed, PAS level, Battery capacity, Error codes,
motor power(showed as loading bar) information etc modes.
Note: The real-time speed unit is indicated in Km/h and MPH, user can set the speed unit in the
setting menu. The display can only indicate one type of speed unit but neither two together.
