ENGLISH
3
1. Horizontal vial
2. Upwards directional indicator (corresponding indicator found on theback of thereceiver)
3. Centre indicator (corresponding indicator found on theback of thereceiver)
4. Downwards directional indicator (corresponding indicator found on theback
of thereceiver)
5. LED indicator, lights when thereceiver is turned on
6. LED indicator, lights during precision measurements
7. [ ] Setting thecentral indicator
8. Vertical vial
9. Laser receiving window
10. Centre line
11. Centre locating slot
12. [ ] Audible on/off buzzer
13. [ ] Power switch
14. Speaker
15. Directional indicators (corresponding indicators found on thefront of thereceiver)
16. Holder attachment points
17. Battery compartment retaining screw
Operating instructions
Battery
1. Unscrew thebattery cover retaining screw and remove thebattery cover.
2. Insert abattery (1×6LR61, 9 V).
3. Note thepolarity markings on thebottom of thebattery compartment to ensure
correct insertion.
4. Refit thebattery cover and tighten thescrew.
Note: If theLED indicator (5) flashes, it means that thebattery capacity is low and
thebattery needs to be changed.
Assembly
Thereceiver can be attached to alevelling staff (sold separately) or other levelling aid
with awidth of up to 58 mm.
1. Securely screw theincluded receiver holder onto theattachment points (16)
on theback of thereceiver.
2. Attach thereceiver onto alevelling staff or similar.
