•No signal received: Always on
•Signal received: Flashing
Parts Description
GNSS Status Lamp Bluetooth Lamp
1 2
CAUTION
GB
The protection class of the external active antenna is IP67,
which can work normally in all-weather environments such as
rain, snow and high dust, but do not immerse the antenna
completely in water. The main unit of the P-9 Race is not
waterproof.
As a precision electronics, the product contains no component
that can be repaired by your own. Any attempt to disassemble
the product will void the original manufacturer's warranty.
Thank you for choosing our product.
This manual is intended to guide you through the safe and
correct use of the product and its accessories, avoiding improper
operations that may result in injury of yourself or any other
person or cause device damage.
•Connected: always on
•Disconnected: off
Bluetooth LampGNSS Status Lamp
SMA Connector (Female)
SMA Connector (Male)
USB Type-A Connector
Professional Racing GNSS Receiver
Quick Start
Steps to Use
Connect the P-9 Race to the external active antenna, and
tighten the antenna connector clockwise.
Place the external active antenna in a position with a good
view of the sky, such as the roof of the car, the top of the
helmet.
The main unit of the P-9 Race is not waterproof.
The placement of the antenna significantly affects the
accuracy of the tracks. For more placement
suggestions, please visit:
cbgps.com/p9/q
9
External Active Antenna
(Magnetic Mount with Adhesive)
