Comdial DigiTech 7700S Series Bedienungsanleitung

Digital Telephone

System

LCD Speakerphone

Station User’s

Guide

This user’s guide applies to the following

telephone models (when usad on

Comdial Gxxxx common equipment with

lxxxx or Sxxxx software cartridge

Rev. 11A and later):

7700S-M Rev. I and later

If you need more information,

consult your v

Digi’Tech Station User’s Guide

Introduction

GCA70-184

Congratulations and thank you for using a DigiTech telephonel Once you have seen all of the

options and benefits that your new telephone offers, you will wonder how you ever did your

job without it. This manual serves as a helpful guide for using all of the various functions of

your new telephone and as a quick reference guide as well. If you should need more

information about a particular function or on a function that is not listed in this guide, consult

the w, GCA 70-220, (your system attendant or whoever runs your main

telephone system should have several copies).

With the LCD version of the DigiTech telephone, the programming and operations are slightly

easier and quicker to use than with the non-LCD version. The steps in operating and

programming for the non-LCD version, however, will still work on the LCD telephone (see GCA

70-220).

DigiTech 7700s LCD Speakerphone

AUXllkY~

Jack lnterocthe Buttons

(NOT progrommoble)

MUt0 3

Eiutton

Hold Button / Microphone Opening /”

Next to A Line

Button

Next to A Direct

v Station

Select (DSS)/

Busy Lamp

Field (BLF) Button

Next to A Fixed

Faature

or Programmable

Feature Button

Above the

ITCM

Understanding the Lights on Your Telephone

Flashing

Red

tine is

idle tine is in Line is in

use at your use at

station another

station

Line is

ringing Your Line i Line has Line has

ringing recalled recalled

and will ba from hold from hold

answered at your at another

when you station station

$;tion i Station is

in uss

or in do

not

disturb

The

feature

is off

The feature

is on

Your

intercom

is idle ’

Station is

receiving a

call or is

catting you

Station-to-

station

messaging

has been

set

Another

station is

calling you

Auto redia

is in usa

System is

in night

mode

above 10

Line is on tine is

hold at on hold

your at

station another

station

An LCD You are usin

message your interwr

has been

saton

your

telephom

Understanding the Lights on Your Telephone

-cont-

Steady Steedy Steady Flashing

off Green Red Red Flashing Fluttering Fluttering Winking

Orange Green Red Winking Steady

Green Red Red wl

I quick flash

Above the HOLD

Button

Message

waiting has

been set

Automatic

station

relocation

has been

set

Above the MUTE

Button

Mute is Called

deactivated party

cannot

hear you

Above the

SPEAKER

Button

Steady Red With Telephone Steady Red with Telephone

On Hook and Busy On Hook and Idle Steady Red with telephone

Off Hook and Busy

Speakerphme mode active Background Music on Group Listen is active

GCA70-184

Using the Speakerphone

DigEech Station User’s Guide

Your telephone is a speakerphone, and it can be used for

any operation in which the handset can be used by

pressing the SPKR button instead of lifting the handset.

You cannot use the speaker to receive a SOHVA or to

originate paging.

Answering Calls

To answer a call that is ringing at your telephone,

if the light is flashing orange, lift handset;

2. if the light is red, press the flashing line and lift handset.

To answer a call using the speakerphone,

press flashing line or ITCM button.

To answer a call that is ringing at any telephone,

lift handset,

2. press ITCY and dial * 4 plus extension number of ringing telephone.

To answer a call that is ringing at a particular telephone

in your group,

hear ringing

2. lii handset,

3. press ITCM and dial # 4 (ringing station must be programmed in

your call pi&up group).

To answer a call that is ringing the loud ringer or night

transfer station,

1. hear ringing ,

lift handset,

3. press fTCM and dial 80,

answer call.

DigiTech Station User’s Guide GCA761S4

Answering Subdued-Off Hook

Voice Announcements (SOHVA) Calls

NOTEz Your telephone may be arranged to receive a subdued off-hook voice

announcement (SOHVA). If it is, an intercom caller may break into your

outside call and deliver a message to your telephone receiver for you to

hear. It works as follows:

while off-hook on an outside call, hear several quick tone bursts

followed by an announcement delivered to your ear through the

handset.

To respond verbally,

1. Press and hold MUTE,

2. speak into handset.

To respond non-verbally,

1. press MSG,

2. press HVLO (have hold), TKMSG (Take Message), or CLBK (Call

Sack) depending upon which message you want to leave.

NOTE: Announcing station must have LCD speakerphone.

. To Block SOHVA,

NOTE: You may block SOHVA only if your telephone is programmed for you to

do so.press BLOCK when SOHVA is initiated.

Making Calls

To make a call,

lii handset, select line (unless your telephone selects it for you), or

select intercom, and listen for dial tone,

2. either dial number, or press HOLD then, press autodial, use speed

dial feature, use redial feature, or press Direct Station Select (DSS)

if making an intercom call.

To dial autodial number,

1. press preprogrammed button. If button is programmed at the second

level of a DSS button, press HOLD before pressing autodial button,

when called party answers, lift handset.

To dial personal or system speed dial number,

1. dial desired code:

1-O = personal speed dial number,

+lO -+M = system speed dial number,

if you select a line, press HOLD then dial code,

when called party answers, lift handset.

GCA7D-l&I

DigiTech

Station User’s Guide

To redial the last number that you dialed at your

telephone,

dial#,

if you select a line, press HOLD then dial #,

when callad party answers, lii handset.

To access outside line using line group feature,

press ITCY, then dial line group access code:

9=groupl,

81 = group 2,

82 = group 3,

83 = group 4,

2. listen for outside dial tone,

3. dial number,

when called party answers, lift handset,.

To queue for a line group if all lines are busy,

press ITCY and dial line group access code (9,81,82, or 83),

2. hear busy tone and dial * 8,

3. hang up and wait for queuing ring-back.

when called party answers, lift handset

To answer queuing ring-back,

lii handset and hear dial tone for line.

To cancel queuing before it rings back at your telephone,

lift handset,

press tTCM and dial I8,

3. hang up handset.

If you are required to enter an account code when making

outside calls,

select line,

2. press ITCM and dial * 04,

3. dial your account, hear outside dial tone, and dial outside number,

when called party has answered, lift handsat.

Holding Calls

To place a call on hold, ‘:.

1. press HOLD, : :

2. hang up handset.

To return to call that is on hold,

iin handset and press line button witfr flashing green light

DigiTech Station User’s Guide GCA7D-IS4

To place a call on exclusive hold.

press HOLD twice and hang up handset.

To place a call on hold at another telephone,

1. while on line, press ITCM (system places call on hold),

2. dial * 90, then dial extension number of telephone to receive held

call,

3. hang up handset.

To answer a call at the extension receiving held call,

1. lift handset,

press ITCM and dii # 90.

To cancel directed call hold and retrieve the call,

1. tit

handset,

2. press ITCM, dial + 4, then diil the extension number of the tele-

phone to whtt you directed the call,

3. rebtevethecall.

To answer a call that someone placed on hold at your

telephone.

1. lift handset,

2. press tTCY, and dial # 90.

To park a call,

1. press ITCM,

2. dial *, then dial park orbit access code

(91-99) (if chosen orbii is busy, dial alternative orbit number),

3. hang up handset,

uss paging feature to announce call and park orbit access code if

necessary.

NOTEr If call is not retrieved within a programmable time limit, it reverts to the

parking station as a standard held call, and only one call can be placed in

an orbit at a time.

To retrieve parked call,

1. hear announcement,

2. Ill handset,

press ITCM and dial 9,

dial park orbit access code (91.99),

5. answer call.

GCA7fJ-184 DigtTech Station User’s Guide

Transferring Outside Calls

To announce a call before transferring it,

answer outside call,

press TRANYCONF (call is placed on hold),

3. dial statin number,

upon answer, announca the call,

5. hang up the handset (call is transferred).

To transfer a call without first announcing it,

1. answer outside call,

2. press TRANYCONF (call is placed on hold),

3. dial statton number,

4. hang up handset. Call will m-ring your telephone if it is not answered

within a preprogrammed time.

If you hear a busy signal or receive no answer,

1. press RECON to return to call,

2. press SOHVA to tell intercom patty that a call awaits

press CAMP to camp on at that station,

4. press OVER to join intercom party’s current conversation.

Conferencing Stations Together

To conference any combination of inside stations and

outside lines,

make first call and press TRANYCONF,

2. make next call and press TPANYCONF to establish conference,

3. repeat steps to add up to two more parties.

NOTEr When setting up a conference call with outside lines and inside stations,

you must call the outside lines first. Use the line group access codes to

place the outside lines in your conference.

To drop outside lines from the conference,

1. first press HOLD to place all calls on hold (not doing this will result

in a tone burst interrupting the remaining conferees),

2. once all calls are on hold, press the line that you wish to bring back

followed by TFtANYCONF; this will retrieve only that line to the

conference,

use step two to bring back each line from hold. i-

Using the Messaging Feature

NOTE: You can set system supplied massages to be displayed at the calling LCD

speakerphone.

To turn LCD messaging on,

press ITCM,

-2. dial +G02,

chooseMSG

press SPKR.

To turn off LCD messaging,

press ITCM,

press#2.

0 To retrieve a message,

observe flashing messaga-waiting light, (HOLD light)

Ml handset,

press ITCM, then press HOLD; connection to message desk is

automatic.

To activate station-to-station messaging (station must

have BLF appearance at called station),

make Intercom call and hear ring-back tone,

2. dial * 7; your station’s BLF light turns on at called station,

3. hang up handset.

To cancel station-t*station messaging,

press ITCM and dial t 7,

2. dial extension number of station where you left the call-back indica-

tion,

press SPKR,

Using the Recall/Flash Feature

If your system has been configured for flash,

press TAP to generate a timed flash signal while on line.

If your system has been configured for recall,

press TAP to disconnect as if you had hung up.

Andere Handbücher für DigiTech 7700S Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Comdial Telefon Handbücher

Comdial

Comdial FX Series Bedienungsanleitung

Comdial

Comdial Digital Communications Systems Bedienungsanleitung

Comdial

Comdial Hot Desking Bedienungsanleitung

Comdial

Comdial Air Imact Bedienungsanleitung

Comdial

Comdial Impact Concierge 8312S Series Bedienungsanleitung

Comdial

Comdial Executech Single Line Telephone Bedienungsanleitung

Comdial

Comdial DXP Impact Bedienungsanleitung

Comdial

Comdial R DSU Bedienungsanleitung

Comdial

Comdial Quick Q Bedienungsanleitung

Comdial

Comdial FXIST-08 Bedienungsanleitung

Comdial

Comdial Impact 8012S Series Bedienungsanleitung

Comdial

Comdial X34PT Bedienungsanleitung

Comdial

Comdial Impact 8024S Series Service-Handbuch

Comdial

Comdial Impact SCS 8324F Series Bedienungsanleitung

Comdial

Comdial DIGITECH Bedienungsanleitung

Comdial

Comdial Quick Q Bedienungsanleitung

Comdial

Comdial Quick Q Bedienungsanleitung

Comdial

Comdial SOLO II Bedienungsanleitung

Comdial

Comdial DXP Series Bedienungsanleitung

Comdial

Comdial HoTelephone 3809X Bedienungsanleitung

Comdial

Comdial DX-80 Bedienungsanleitung

Comdial

Comdial DXP Digital Communications System Bedienungsanleitung

Comdial

Comdial SCS 8324SJ-FB Bedienungsanleitung

Comdial

Comdial Voice Express 41C Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

D-Link

D-Link DWR-720/PW Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Panasonic

Panasonic KX Series Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung